3,5" IPRO 3-13 (0.8 kW, 230 V) submersible pump with 20 m cable

IPRO 3.5" 3-13 (0.8 kW, 230 V) submersible pump with 20 m cable

IPRO 3.5" 3-13 (0.8 kW, 230 V) is a multi-stage submersible pump with a diameter of 90 mm (3.5"), intended for installation in wells with a minimum internal diameter of 100 mm. The machine is characterized by increased resistance to sand and is based on elements made of, among others, made of AISI 304 stainless steel. It is widely used to power residential buildings, farms and professional drainage systems.

For whom (B2B)

• Water system installers: They receive a ready-to-use kit with a factory-made 20-meter cable and a built-in capacitor, which eliminates the need to connect an external jumper box.
• Agricultural and horticultural farms: They gain a machine with increased resistance to sand, dedicated to efficiently powering agricultural drip lines and extensive irrigation systems.
• Drilling and well companies: The compact diameter of 90 mm allows for safe and quick installation of the pump in standard wells with a cross-section of 100 mm or more.
• Wholesale and technical stores: Expanding the range with a proven, failure-free submersible pump from the brand IPRO supported by a 36-month warranty period.

Application

Multistage submersible pump IPRO 3.5" 3-13 is used for efficient and continuous water supply of single-family houses, multi-family buildings and specialized farms. The design of the hydraulics with increased resistance to sand is perfect for more difficult geological conditions, where the pumped medium may contain small solid fractions. This equipment is the optimal choice for powering extensive irrigation systems, including agricultural drip lines, as well as for supporting local drainage networks.

Thanks to the use of proven manufacturing technology and integrated thermal protection in the motor winding, the device maintains high operational stability and protects the installation against overloads. The compact external size of the device allows the machine to be lowered smoothly in deep wells with a minimum diameter of 100 mm. The factory-made 20-meter-long cable with a plug will facilitate installation in shallow deep wells, without the need to repair the cable.

Features

• Increased sand resistance
• Top quality materials
• Long, failure-free operation based on proven technology
• 20 m power cable with plug
• Capacitor built into the engine (no need to use an external starter box)
• Thermal protection built into the motor winding
• Warranty and post-warranty service
• 36-month warranty

Technical data

• Diameter: 3.5"
• Lifting: 60.0 m
• Capacity: 100.0 l/min.
• Power: 0.8 kW
• Power supply: 1~230V
• Frequency: 50 Hz
• Current: 5.7 A
• Motor speed: 2850 rpm.
• Insulation class: F
• Operating mode: continuous
• Degree of protection: IP68
• Connection: 1½"
• Max. liquid temperature: 35°C
• Maximum number of starts per hour: 30
• Max. immersion depth: 150 m
• Power cable length: 20.0 m
• Dimensions diameter/height: 92/1023 mm
• Weight: 13.5 kg

Materials

• Suction/discharge port: AISI 304 stainless steel
• Housing: AISI 304 stainless steel
• Shaft and rotor: AISI 304 stainless steel
• Impeller: PPO polymer
• Diffuser: reinforced polycarbonate
• Mechanical seal: Ceramic/SiC/NBR
• Oil-cooled engine

FAQ – IPRO 3.5" 3-13 (0.8 kW, 230 V)

Where is this product sold?

In what wells can this device be installed?

Does the pump require an external starter box to be connected?

Who should I send the equipment to in the event of a failure?

Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.