Some illustrative shots in the video were generated by AI.

No more cold showers or fluctuating water pressure. The IVR-X inverter smoothly controls the pump speed and maintains a constant, preset pressure in the system—regardless of how many taps are open at once.

In this video, we show:
✅ how a pump inverter works and how it differs from a conventional pressure switch,
✅ where energy savings of up to 30–60% come from,
✅ why soft starting and stopping extend pump life and eliminate water hammer,
✅ why a small pressure tank is sufficient instead of a large hydrophore tank,
✅ a complete set of protections: dry-run, overload, overvoltage, undervoltage, short circuit, and rotor lock,
✅ an RS-485 connector (a data transmission standard) and control of multi-pump systems,
✅ complete step-by-step installation: power supply, 230 V / 400 V pump (star–delta), and pressure sensor,
✅ parameter configuration and testing on an operating system.
*The material may have been generated/modified using AI

A deep-well installation does not have to cost PLN 2,000. In this episode, Radek—a contractor who drills and equips wells every day—shows how he does it for his customers using IBO equipment.

The star of the episode: the PC-99 controller—an electronic pressure switch with a pressure reducer that replaces a traditional, expensive installation:
• works in any position, including horizontally—it fits in a standard inspection box for sprinklers
• protects the pump against dry running—no more burnt-out motors when the water level drops
• automatically switches the pump on and off when water is being drawn
• you can remove it in a minute for the winter: lift the hatch and it is right there
• costs approx. PLN 170—instead of PLN 1,500–2,000 for a monolithic installation

Included with it on site: IBOPRESS 10 1¼″—a digital pressure switch with a display that lets you set the cut-in and cut-out pressure to the nearest tenth of a bar (range up to 10 bar, pumps up to 2.2 kW). Full control over your pressure tank system, without guessing and without a wrench in hand.

Radek also explains directly from the construction site when a plastic monolithic installation makes sense, when clay will push it back up along with the floor—and why the fifth ring well in a row ends up without water

1|*The material may have been generated/modified using AI

*The material may have been generated/modified using AI

A submersible pump with the same specifications as a classic model, but 60% shorter and half the weight? This is not a marketing gimmick. In this video, I show the IBO 4" IBQ IVR pump with a permanent-magnet synchronous motor (PM) and a dedicated inverter—from theory to complete installation.

In the video, you will learn:
✅ how the PM motor (5,000 rpm) differs from a classic asynchronous motor and how its smaller dimensions are achieved
✅ how to connect the inverter to the pump step by step (R-S-T, U-V-W terminals, pressure sensor)
✅ how the three operating modes work: constant frequency, constant current, and constant pressure—and when to use each one
✅ how to set up operation with a float switch (filling and emptying the tank) and a cyclic-operation timer
✅ how to change the motor's rotation direction without switching the phases
✅ a complete overview of 12 models in the series: flow rates of up to 800 l/min, power ratings of 4–13 kW, and a maximum head of 195 m

1|*This material may have been generated/modified using AI

*Materiał może być wygenerowany/zmodyfikowany z użyciem AI

Today, together with Marcin Potrapeluk from MP Serwis Kotłów, we will tell you about one of the most versatile boiler rooms!
We will find out:

• How much does it cost to build such a boiler room?
• How much money can be saved compared to a conventional pellet boiler room?
• Who is it worthwhile for?

And much more

*This material may have been generated/modified using AI

Today, together with Marcin Potrapeluk from MP Serwis Kotłów, we will tell you about one of the most versatile boiler rooms!

We will find out:
1|How much does it cost to build such a boiler room?

• Ile kosztuje wykonanie takiej kotłowni?
• How much funding can you receive?
• How much time is spent in such a boiler room?

And much more

*The material may have been generated/modified using AI

Another week, another video. Radek from EL TOPO LTD is back on our channel!
In this video, you will learn, among other things,

• What percentage of boreholes end in success?
• What happens to the customer when a problem occurs?
• What problems occur most often?
• Which submersible pump is worth buying and why?

*The material may have been generated/modified using AI

Would you like your boiler room to serve you for as long as possible?
If so, in this video, we’ll tell you about 3 decisions that will ensure your boiler room operates trouble-free for years.

We’ll answer questions such as:
- Is it worth investing in magnetic filters?
- How can you keep the water clean?
- Are diaphragm tanks worth their price?

*This content may have been generated/modified using AI

Are you looking for solutions that will make your boiler room operate
efficiently?
If so, in this video, we will tell you about 3 decisions that will make
your boiler room much more efficient!

You will learn how pump groups affect the operation of the boiler room, whether
coils are essential, and why a heat pump is not the only thing
worth considering!

*This material may have been generated/modified using AI

In this video, Kamil from the channel @holiboodzdrowydom  will tell you about the 3 mistakes he made when building his boiler room—and how you can avoid them!

He will give us very practical advice on extending the life of your heating system and answer:
- Is it worth installing magnetic filters?
- Are diaphragm expansion vessels just a waste of money?
- What happens when you base your entire boiler room on a single pump group?

We invite you to watch, and new videos with Kamil are coming soon!

*This content may have been generated/modified using AI

In the face of changing weather, proper irrigation is crucial for
farmers. At the Agrotech trade fair, we presented our IR-IBO 75/400
irrigation sprinkler.
Mr. Maciej, an expert in the field, discussed our irrigation
system in detail!

*The material may have been generated/modified using AI

In this video, Radek—an experienced installer—shows what drilling a deep well looks like in practice

We spend the entire day with the crew carrying out the drilling and go through all the stages of the process step by step. You’ll see what working in the field looks like, what challenges may arise, and what happens when things don’t go according to plan

Is there anything to be afraid of?
What could go wrong?
How long does it take to build a deep well?

You’ll find answers to all these questions in this video

*This material may have been generated/modified using AI

Gravity wastewater drainage has one limitation: it cannot overcome a change in elevation without mechanical assistance. In such cases, a pumping station is the only sensible solution.
In this material, the author breaks the system down into its essential components:

• tank construction (HDPE, watertightness, resistance to ground pressure)
• internal fittings and system serviceability
• hydraulic safeguards (check valve, shut-off valve)
• float-based automation (START/STOP + alarm)
• real differences between pumps: free passage vs. macerator vs. high pressure

We also show why “assemblies” fail and where problems most often arise in everyday operation.
This material is intended for people who want to choose a system consciously, rather than by trial and error.

*This material may have been generated/modified using AI

Join us for coverage of the Water Expo and Walls and Pumps trade fairs, where we focus on modern water management and industrial fittings. We present our booths, which featured products such as PC-24, PC-99, Domatik, and SkyLine!

*The material may have been generated/modified using AI

Trade fair season is in full swing. This time, we attended the ENEX trade fair in Kielce.
This event in Kielce, one of the largest exhibition centers in Central and Eastern Europe, attracted thousands of people from all over the world!

We invite you to watch our coverage!

*The material may have been generated/modified using AI

Trade fair season has begun! Check out our coverage of the International Heating, Ventilation and Air Conditioning Technology Fair at Ptak Warsaw Expo. We are presenting our new stand there and discussing solutions for home construction, including efficient heat pumps and heating systems.

*The material may have been generated/modified using AI

HWI 1300 AUTO is a simple and convenient automatic surface pump for use in the home and garden. It starts automatically when the tap is turned on and switches off when water consumption ends, so it does not require a pressure tank or additional control system. The pump is equipped with a Venturi tube that improves its water-priming capability, making it well suited for drawing water from wells, rainwater tanks, and other private water sources. The device is designed for pumping clean, cold water and increasing pressure in simple domestic systems. Built-in safety features protect the pump against dry running, motor overheating, and leaks, while the integrated filter protects it from contaminants. HWI 1300 AUTO is a plug-and-play solution—simply connect the hoses, fill the pump with water, and start using it immediately.

*This material may have been generated/modified using AI

HWI 1300 AUTO is a simple, user-friendly automatic surface pump for the home and garden. It starts automatically when the tap is turned on and switches off when water consumption ends, so it does not require a pressure tank or additional automation. The pump is equipped with a Venturi tube that improves its water-priming capability, making it well suited for drawing water from wells, rainwater tanks, and other private water sources. The device is designed for pumping clean, cold water and for increasing pressure in simple domestic installations. Built-in safety features protect the pump against dry running, motor overheating, and leaks, while the integrated filter protects it from impurities. HWI 1300 AUTO is a plug-and-play solution—simply connect the hoses, fill the pump with water, and it is ready to use.

*The material may have been generated/modified using AI

PC-30P is one of the most powerful flow controllers in the IBO range, designed to work with large single-phase pumps. It supports devices with power ratings of up to 3 kW and currents of up to 30 A, offering full control over pump operation even in demanding installations. Two operating modes—flow and pressure—allow it to be adapted both to simple systems without a tank and to advanced systems with a hydrophore tank. Built-in current monitoring and a complete set of safety features protect the pump against dry running, overload, and unstable operation.

*The material may have been generated/modified using AI

In this episode, we show how the intelligent controller for single-phase pumps up to 2.2 kW works, what operating modes it has, how to set it up correctly, and which mistakes to avoid during installation.
We explain the differences between flow mode and pressure mode, as well as when a pressure tank is needed.

*This material may have been generated/modified using AI

In this video, we’ll tell you which 5 mistakes can ruin your underfloor heating!
Installer Kamil Szaruga will tell us which mistakes are most often made when installing underfloor heating!

*The material may have been generated/modified using AI

This film tells the story of Mr. Andrzej, whose complicated underfloor heating system turned out to be faulty. After years of problems heating his home, another installer—Kamil—undertook the repair of the system.

*The material may have been generated/modified using AI

Installing a pressure booster system doesn’t have to be complicated. But only if you do it correctly 💧 In this video, we show step by step how to connect and start up a pressure booster set using the PI-JET + MULTI PRESS 2 + IPRO FIX as an example—no guesswork and no mistakes that cause pumps not to prime, make noise, or shut off every few moments. We start with the suction side, because this is where things most often go wrong...

*The material may have been generated/modified using AI

These inconspicuous devices determine whether heat from the boiler actually
reaches the radiators and underfloor heating. 🔥 In this video, we simply explain how a circulation pump works, what symbols such as 25-60/180 mean, and how to choose a model for your installation so you don’t overpay, create unnecessary noise in the valves, and genuinely save energy. We also show the differences between the operating modes of modern pumps and discuss specific examples of popular models—from classic circulation pumps to PWM-controlled versions with boiler automation.

*The material may have been generated/modified using AI

Wondering how to choose the right pump group for your home? 🤔 In this video, we explain what pump groups are and how they affect the performance of your heating system.

*This content may have been generated/modified using AI

In this video, we demonstrate in practice how a pressure booster set behaves in two different configurations — with the diaphragm working and after it has been completely “switched off.” This is a short but highly educational demonstration for people using pressure boosters in homes, gardens, or industrial installations.

*The material may have been generated/modified using AI

Wondering how smart control and proper safety measures can protect your heating system? 🤔 In this video, we’ll tell you everything you need to know about heating system safety measures.

*The content may have been generated/modified using AI

Would you like to learn more about pumps and pump groups?
If so, in this episode we’ll tell you everything you need to know if you want to enter this world!

We’ll answer questions such as: What types of pumps does IBO offer? What should you pay attention to when buying pumps? What is a circulation pump? What is a circulating pump? What is the difference between a pump and a pump group?

*This material may have been generated/modified using AI

Are you wondering what the process of drilling a deep well looks like? 🤔 Together with an expert, we show how well drilling is carried out and discuss potential problems.

We check whether drilling a well leaves a mess, what mistakes well drillers make, and what to do to ensure your well is drilled properly!

*The material may have been generated/modified using AI

Are you considering choosing between an inverter and a tank for your water system? 🤔
In this video, we compare the advantages and disadvantages of both solutions, analyzing their costs and reliability. Find out which one will work better in your home!

*This material may have been generated/modified using AI

Another week and another trade show!
This time, we’re at the Instal Termo trade show in Lublin.

See what we did there and what trade show attendees could see at our booth!

*This material may have been generated/modified using AI

In September this year, we visited the WodKan and Heating Tech trade fairs in Nadarzyn!
During the fairs, we held hundreds of conversations with installers, manufacturers, and private customers.
But most importantly, we received an award in the "Trade Fair Product" category!
And for what? You’ll find out in this video!

*The material may have been generated/modified using AI

Are you considering your own deep well, but don't know where to start, how much it costs, or whether it's even worth it? 🤔 This video is for you!
In today's episode, we discuss everything you need to know before making a decision:
Permits and formalities: Do you need a hydrogeological design?
Depth and costs: What affects the price?
Choosing a pump: Why is a submersible pump the heart of the entire system?
Benefits: Independence from the water supply network and real savings.

*This material may have been generated/modified using AI

Magi-2 is an energy-efficient circulation pump with a motor using permanent magnets and an automatic pressure controllerthat automatically adjusts the output to the system’s needs. It offers 8 operating modes, including AUTO, pressure and constant-speed modes. Ideal for central heating, domestic hot water, heating, air conditioning, and industrial systems. For installers – 3-year warranty and 1:1 replacement.

VR-11 with pomp MH PRO is an intelligent system that maintains constant pressure by adjusting the motor speed. It supports 1.1–2.2 kW (single-phase) pumps and up to 7.5 kW (three-phase) pumps. It offers 30–60% energy savings, soft start, dry-run and overload protection, and operation in groups of up to 6 pumps. Easy to use, it is ideal for homes, farms, wells, and irrigation systems.

IVR-10 is an intelligent inverter that controls the pump, maintaining constant pressure in the system by regulating the motor speed. It supports 1.1–2.2 kW pumps and offers energy savings of up to 60%, a soft start, and advanced protections, including dry-run protection without probes. Simple configuration and the ability to operate in groups of up to 6 pumps make the IVR-10 an excellent choice for homes, farms, and irrigation systems.

IBOPRESS 30 is an electronic pressure switch with overload and dry-run protection, ideal for three-phase pumps. It allows you to set the start and stop pressure and the maximum current draw. Automatic restart and a ceramic sensor ensure reliability, while the simple connection is facilitated by cables with a plug and socket. Available in a standard version and with a cabinet for installation in damp locations.

IBO PRESS 10 is an electronic pressure switch with dry-run and overload protection, based on a precise ceramic sensor. It allows you to program the start and stop pressure as well as the maximum current draw. Automatic restart facilitates system operation, while stainless steel ensures durability. Easy installation with ready-made cables and accuracy of 0.01 bar make it ideal for demanding installations.

ZWQ is a series of professional submersible pumps with a three-channel grinder, designed to operate in demanding conditions. Thanks to their cast-iron construction, NSK bearings, and thermal pump protection, they are suitable for pumping stations, septic tanks, and draining flooded rooms. Single-phase models have a float switch, and all can be installed on a coupling foot. Also ideal for rainwater.

Test IBO ZWQ 1500 demonstrates the effectiveness of a three-channel, high-flow macerator – the test used gloves, a cloth, and a cloth diaper. The pump works well in household and municipal septic tanks, wastewater treatment plants, and in agriculture for liquid manure. The option of mounting on a coupling foot makes operation easier. A professional test video is coming soon.

SANIBO 5 to fully automatic wastewater lifting station z with three inlets, ideal for bathrooms located away from the main sewer stack or below the drain outlet. It allows connection of a bathtub, toilet, washing machine, and unused ports can be capped. Power 600 W, flow rate 150 l/min, pumping up to 9 m / 90 m and resistance to 90°C make it a reliable solution for any demanding installation.

🎥 Discover the true quality of Italian FP4 submersible pumps—straight from the manufacturer!

In this video, the head of Dambat talks about the FP4 series of submersible pumps made of stainless steel and equipped with revolutionary DRY RUN PROtechnology, which significantly increases the pumps’ resistance to dry running.

You’ll learn: what sets FP4 pumps apart from others on the market, why they are so durable and reliable, where they work best in practice, and what their innovative design, protected by a European patent, looks like.

IBO FURIATKA This pump is designed for wastewater treatment plants and sewage pumping stations. Equipped with the most effective screw grinder and a robust cast-iron construction, it handles rags, plastic films, and other contaminants. Reinforced steel, a control float, and overload protection ensure reliable operation in the toughest conditions. Ideal for household septic tanks and locations without a sewage system.

KRAKEN 1800 is a professional submersible pump with a high-performance macerator system, ideal for raw sewage, sludge, and dirty water. It handles rags, films, and hygiene products with ease. Versions with a disc or screw-type macerator perform reliably in demanding conditions thanks to their stainless steel and cast-iron construction. Excellent for septic tanks, wastewater treatment plants, pump stations and agricultural applications.