High pressure submersible pump IBO MULTI IP 1000 INOX (1 kW, 230 V) with float switch
High pressure submersible pump from the MULTI IP INOX series intended for pumping clean and slightly contaminated water. The device with a power of 1.0 kW (230 V) is equipped with an innovative cooling jacket and float control. The structure based on stainless steel elements guarantees reliable operation in power supply installations and watering systems drawing medium from ring wells.
For whom (B2B)
-
Gardening and installation companies: the built-in water jacket allows the device to operate safely without the need to be completely immersed, which facilitates installation in extremely shallow tanks and ponds.
-
Farms and greenhouses: a lifting height of 34 meters and a capacity of 100 l/min provide stable pressure necessary to drive extensive irrigation systems.
-
Wholesale and technical stores: light weight of the device, factory 10 m cable and built-in Float they enrich the stock offer in the category of the most universal home and garden pumps.
Application
The pump is used to supply water to single-family houses and to water gardens using ring wells. Due to the special design of the cooling system, it is also used in ponds and natural springs from which water is taken right next to the surface of the mirror.
The device is also useful for temporarily pumping clean water from flooded rooms. It is essential to remember that due to the specification of the rotor, the pumped medium cannot contain any elements with grinding properties, such as sand.
Features, description and technical data
The key advantage of the model is the use of an internal cooling jacket, which eliminates the risk of overheating the drive in the event of incomplete immersion of the housing. The pump uses an integrated float switch that automatically controls the engine and provides reliable protection against dry running. Hardware thermal protection is also implemented in the winding.
The mechanism is protected by the motor housing, shaft and rotor made of solid AISI 304 stainless steel. The rotors are made of durable PPO polymer. The engine designed for continuous operation (2850 rpm) is protected by a precise mechanical stuffing box made of ceramics, carbon and NBR. The device is powered by single-phase voltage and supplied with a 10-meter cable with a plug.
- Device type: submersible pump high pressure with float switch
- Power supply: 1~230V
- Frequency: 50 Hz
- Engine power: 1.0 kW
- Current: 3.7 A
- Capacity: 100.0 l/min.
- Lifting height: 34.0 m
- Motor speed: 2850 rpm.
- Connection [DN/inch]: 1x1½
- Outlet direction: Vertical
- Built-in Float/probe: YES
- Insulation class: B
- Operating mode: continuous
- Degree of protection: IPX8
- Working position: Vertical
- Power cable length: 10.0 m
- Dimensions length/height/width: 400/165/180 mm
- Weight: 7.8 kg
- Maximum ambient temperature: 40°C
- Materials: motor housing, shaft and rotor (AISI 304 stainless steel); impeller (Polymer PPO); mechanical seal (Ceramic/Carbon/NBR)
FAQ – IBO MULTI IP 1000 INOX (B2B)
Where is this product sold?
Where is this product sold?
+
IBO MULTI IP 1000 INOX (1 kW, 230 V) submersible pump with float switch you will find in industry retail outlets and wholesalers cooperating with the IBO brand.
Where and how to report this device for repair?
Where and how to report this device for repair?
+
The warranty for the device is 24 months. The only authorized one service is run by Dambat, and the equipment is handed over after completing the online form.
How does the pump cool in shallow water?
How does the pump cool in shallow water?
+
The unit is equipped with a structure with a cooling jacket. Thanks to this, the flowing water, sucked in from the bottom, flows around and cools the engine from the inside, eliminating the requirement for the housing to be fully immersed from the outside.
Can this pump handle grinding elements?
Can this pump handle grinding elements?
+
Definitely not. The device with PPO polymer impellers allows only pumping clean and slightly polluted water. The presence of sand or other abrasive fractions will lead to seizure of the hydraulic system.
How does the dry run protection system work?
How does the dry run protection system work?
+
A float switch connected directly to the pump provides protection against dry running. As the liquid table falls Float it descends to cut off completely at the critical point Power supply engine.
Dambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.
