Building and modernizing a home water system is a process that requires thoughtful selection of devices, accessories and technologies. From an efficient submersible pump to a suitable one well filter, after water treatment plants for a single-family house – each element is crucial for the quality, pressure and reliability of the water supplied. As a manufacturer of brand pumps and accessories IBO i IPRO, company Dambat provides comprehensive solutions for the construction of modern water installations both in single-family houses and in garden and industrial systems.
Pumps - the heart of every water installation
The pump is one of the most important elements of the water system. It is responsible for pumping water from the intake to the installation and maintaining the appropriate pressure. Depending on the water source and application, we can distinguish several types of devices. Pump for a ring well is a solution used in traditional dug wells, where the water table is at a shallow depth. These devices must be resistant to minor contamination and be highly reliable.
In turn pump for rainwater tank is invaluable in rainwater recovery systems. It allows for automatic pumping of collected water into the garden installation, and in combination with underground rainwater tank with a pump It is an ecological and economical source of water for irrigation and washing. They are also popular Mauser pumps, which enable the use of water collected in IBC containers for irrigation or technical purposes - they are perfect for gardening and small installations.
For deeper intakes, submersible pumps are used, which pump water from great depths. For the system to function properly, it is also necessary to plan the entire pressure system - including connection diagram hydrophore with a deep well pump. This system ensures stable pressure in the installation, water storage and protection of the pump against too frequent activation.
Filters and iron removers - the key to clean and safe water
The quality of water drawn from a well or from the water supply network may vary significantly, which is why its proper preparation is so important. The basic elements of the system are string filters, which retain sand, suspensions and mechanical particles. These are mechanical filters that protect other elements of the installation against contamination and extend their service life. In the case of well water, it is also extremely important well filter – mounted at the input, protects the pump and the installation against small impurities from the intake.
The next step in water treatment is water iron remover, which removes excess iron and manganese, improving the taste, smell and color of water. This process is especially necessary in homes that use their own wells, where the content of these elements often exceeds the permissible standards. A well-selected iron remover protects fittings, household appliances and heating installations against deposits.
The most comprehensive solution are water treatment plants for a single-family house, which combine several stages of filtration - mechanical, chemical and biological. Depending on the water quality and users' needs, they can remove not only iron and manganese, but also ammonium compounds, hydrogen sulphide, water hardness and microorganisms. These stations can be easily integrated with other system elements, such as retention tanks, pumps or pressure systems.
Rainwater tanks - an ecological source of water
More and more investors decide to use rainwater, which not only reduces bills, but also relieves the burden on water and sewage networks. Underground rainwater tank with a pump is a solution that allows you to store rainwater and automatically supply it to the irrigation system, garden installations and even toilet flushers. By using an appropriate pump, water can be pumped with high efficiency and under appropriate pressure, which allows it to be used at many collection points.
The rainwater collection and use system can be combined with mechanical filtration, which prevents the entry of leaves, sand and other pollutants. Combined with brand pumps IBO and automation IPRO This creates a modern, efficient and maintenance-free system that significantly increases the building's self-sufficiency and reduces the consumption of drinking water.
How to plan a complete water system – practical tips
When designing a water installation in your home or garden, it is worth paying attention to several key technical aspects:
- Select the pump according to the type of water intake – pump for a circle well will work well in shallow intakes, while a submersible pump is necessary in deeper wells. It will be perfect for retention tanks pump for rainwater tank or Mauser pump, adjusted to the capacity and lifting height.
- Ensure effective filtration – string filters i well filters protect the installation against contamination, a water iron remover removes iron and manganese compounds. Comprehensive water treatment plants for a single-family house they raise water quality to the level of drinking water.
- Include the pressure and storage system – connection diagram of a hydrophore with a submersible pump should include the appropriate selection of the pressure tank, pressure switch and valves, which will ensure stable pressure and protect the pump.
- Choose automation and security – pressure controllers, water level sensors and safety valves increase the reliability and durability of the entire system and enable its maintenance-free operation.
- Use rainwater – underground rainwater tank with pump will allow you to effectively use free water for watering, washing and flushing, reducing the operating costs of your home.
Each of these elements affects the functioning of the entire system, so it is best to plan the installation comprehensively - from water intake, through filtration and storage, to distribution. The appropriate selection of devices and components guarantees stable operation, high water quality and long service life of the entire installation.
FAQ – most frequently asked questions about pumps, filters and water treatment
How does a water iron remover work and when is it needed?
Water iron remover removes excess iron and manganese from water through the process of aeration and filtration. It is necessary in the case of water coming from own water intakes, in which the content of these elements often exceeds the permissible standards. Its use improves the taste and smell of water, protects the installation against deposits and corrosion, and extends the life of the devices. Regular maintenance and rinsing of the filter bed are crucial to maintaining high efficiency. Thanks to modern control systems, these devices operate automatically and do not require daily maintenance.
What is the difference between a ring well pump and a deep well pump?
Pump for a ring well it is adapted to work in shallow intakes, where the water table is usually up to 8 meters below ground level. It has greater tolerance to fine contaminants and a simpler design. Submersible pump in turn, it is submersible and works in deeper aquifers, pumping water from a greater depth. It requires more precise adjustment to the well diameter, depth and source capacity. The appropriate selection of the pump for the operating conditions directly affects the efficiency and durability of the entire system.
How does a string filter work and where should it be installed?
String filters are mechanical filters made of wound plastic that retains suspensions, sand and other solid particles. They are installed at the entrance of the water installation, before devices such as treatment stations, iron removers or heaters. Their main role is to protect fittings and devices against mechanical contamination that may shorten their service life. These filters are cheap, easy to replace, and available in various degrees of filtration, so they can be matched to the water quality. Regular replacement of cartridges ensures their effectiveness and long life of the entire installation.
How is the connection diagram for a hydrophore with a submersible pump constructed?
Connection diagram for a hydrophore with a submersible pump includes several key elements: a submersible pump pumping water from the well, a pipeline with a non-return valve, a pressure tank, a pressure switch (pressure controller) and a pressure gauge. The whole thing works automatically - when the pressure in the tank drops, the pressure switch starts the pump, and when it reaches the set level, it turns it off. Thanks to this, the system maintains stable pressure in the installation, protects the pump against too frequent activation and ensures constant access to water. Correct execution of the diagram is crucial for the safety and durability of the entire system.
Is it worth investing in an underground rainwater tank with a pump?
Underground rainwater tank with a pump is a solution that allows you to effectively collect and use rainwater in your household. Thanks to the use of a pump, water can be easily supplied to the irrigation installation, toilet flushing system or for cleaning purposes. This solution reduces the costs of drinking water consumption and increases the independence of the building from the water supply network. Moreover, rainwater storage has a positive impact on the environment by limiting the flow of rainwater into the sewage system. The system can be integrated with filtration and automation, which makes it virtually maintenance-free and very durable.
Are there other types of filters available other than a string filter?
Yes – apart from the classic one string filter there are also other types of cartridges available in water treatment systems such as carbon filter (carbon block), ceramic filter, mesh filter and foam filter. Carbon filter removes chlorine compounds from water, improves its taste and smell, thus significantly increasing the quality of utility water. Ceramic filter it is characterized by very high filtration accuracy, retaining the smallest particles and is often the final stage of purification. Mesh filter is a reusable insert that effectively protects the installation against sand, suspensions and larger mechanical impurities, and foam filter it is perfect for removing larger particles, such as rust or soil particles. In practice, several types of filters are often used at the same time to achieve comprehensive and effective water purification at various stages of filtration.
Summary
Building a complete water system in a single-family house or farm requires a thoughtful selection of devices and their mutual cooperation. Pumps, filters, iron removers and water treatment plants play different but equally important roles in ensuring access to clean, safe and properly pressurized water. Thanks to modern technological solutions, you can create a system that will operate without failure for many years, and its maintenance will be limited to a minimum. The integration of all elements - from intake, through filtration and storage, to distribution - allows you to fully use the potential of the installation and ensure its high efficiency.
By choosing brand devices Dambat, including pumps IBO and automation IPRO, you invest in proven technologies that can be adapted to any installation - both new and modernized. The comprehensive offer includes pumps for wells, rainwater and containers, filters, iron removers, treatment stations and accessories for pressure systems. Thanks to this, you will build a water system tailored to your needs and local conditions, which will provide you with comfort, independence and long-term reliability.
