IBO KBFU INOX 50-0.40 M pump Sludge Submersible 230V
KBFU INOX 50-0.40 M is a single-phase pump Sludge with a power of 0.4 kW, powered by 230 V, distinguished by a motor housing and a shaft made of AISI 316 stainless steel. The KBFU INOX series is designed to work in environments where increased corrosion resistance is required - while maintaining full suitability for pumping water with sand and sludge.
For whom
-
Earthworks and construction contractors – the pump supports quick drainage of excavations and construction sites, even in the presence of sand and sludge in the inflow water.
-
Companies from the mining and stone industry – design adapted to work in environments with mineral contamination and water with increased chemical aggressiveness.
-
Maintenance services and technical services – continuous operation mode and IP68 protection level are suitable for both planned drainage and emergency operations.
-
Equipment rentals and distributors – ready-to-use model with a 2" connector and a 10 m cable, complementing the offer with a version made of AISI 316 stainless steel.
Application
The IBO KBFU INOX series is designed for draining water from construction sites, mines and quarries - wherever the pumped medium contains sand, sludge or other mechanical impurities. AISI 316 stainless steel motor housing and shaft provide corrosion resistance in higher acid conditions not available to standard gray cast iron models. The KBFU INOX 50-0.40 M model pumps out water to an extremely low level of 5 mm, which makes it useful wherever complete emptying of a tank or excavation is important.
The key element of the design is the vertical direction of the outlet and the threaded DN 2" connector, enabling quick connection of the delivery hose using a clamp or quick connector. Thermal protection built into the motor winding protects the device against overheating during long-term continuous operation.
Features of the KBFU INOX 50-0.40 M pump
- Adaptation for pumping water with sand: YES
- Cooling Jacket: NO
- Minimum pump-out level: 5mm
- Discharge port: 2" threaded, vertical direction
- Thermal protection: YES (built into the motor winding)
- Float switch: NO
- Working mode: continuous
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – pump Sludge KBFU INOX 50-0.40 M
What is the difference between the KBFU INOX series and the standard KBFU series?
The key difference is the material of the motor housing and shaft - the INOX series uses AISI 316 stainless steel instead of gray cast iron. AISI 316 is more resistant to corrosion than the more popular AISI 304 - especially when working with a medium with higher acidity. This is the choice for work in conditions where a standard cast iron model would corrode too quickly.
To what level does the pump pump out water?
The KBFU INOX 50-0.40 M model pumps out water to a level of 5 mm - this is one of the lowest parameters in this class of pumps. Useful wherever it is necessary to completely empty a tank, well or excavation without leaving a puddle.
Can KBFU INOX 50-0.40 M handle water containing sand?
Yes - the pump is designed to pump water containing sand and fine sludge. The impeller made of glass fiber reinforced polyamide and the double SiC/graphite mechanical gland ensure abrasion resistance when pumping contaminated media.
Where to buy the IBO KBFU INOX 50-0.40 M pump?
The pump is available from Dambat trading partners, installation wholesalers and technical stores. Dambat does not sell directly.
How long is the warranty for KBFU INOX 50-0.40 M?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat, Adamów 50, Grodzisk Mazowiecki.
