IBO KBFU 50-1.5 M pump Sludge Submersible 230V
KBFU 50-1.5 M is a single-phase pump Sludge with a power of 1.5 kW, powered by 230 V, intended for intensive drainage works requiring high efficiency without the need to connect to a three-phase network. The KBFU series is designed to operate in media containing sand, sludge and abrasive particles - where standard centrifugal pumps quickly fail.
For whom
-
Contractors of drainage and road works – capacity of 420 l/min and lifting up to 18.5 m enable efficient drainage of extensive linear excavations.
-
Mines and mining plants – cast iron body with a heavy-abrasive layer made of a chrome alloy copes with intense abrasive contamination.
-
Installers and service teams – 2" threaded connector and a cable with a plug shorten the time needed to start the pump at the site of the failure.
-
Facility managers and property administrators – high efficiency when powered at home is useful in eliminating the effects of flooding.
Application
The KBFU series is designed for draining water from construction sites, mines and quarries - wherever the pumped medium contains sand, sludge or fine aggregate that destroys standard centrifugal pumps. The durable, cast-iron construction of the hydraulic unit and the rotor covered with a heavy-abrasive chrome alloy layer withstand difficult operating conditions, significantly reducing the risk of unplanned downtime and service costs. The vertical outlet direction facilitates installation in narrow collection wells and tight trenches where operating space is limited.
A key element of the design is the cooling jacket surrounding the engine. Thanks to it, the pump does not have to be fully immersed in the pumped medium to maintain a safe operating temperature - the engine is cooled by the jacket wall even when the water level in the trench is very low. This is a significant advantage in the final phase of dewatering, when there is little water left and the standard pump would have to be turned off. Thermal protection built directly into the motor winding provides an additional layer of protection against overheating during long-term continuous operation.
The KBFU 50-1.5 M model operates on a single-phase 230 V power supply, which makes it a particularly practical tool in intervention sites where power generators are used. Capacity of 420 l/min and lifting up to 18.5 m allow you to handle deeper excavations without the need to use intermediate pumps.
Features of the KBFU 50-1.5 M pump
- Adaptation for pumping water with sand: YES
- Cooling Jacket: YES
- Minimum pump-out level: X
- Discharge port: 2" threaded, vertical direction
- Thermal protection: YES (built into the motor winding)
- Float switch: NO
- Bearings: NSK (Japan)
- Working mode: continuous
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – pump Sludge KBFU 50-1.5M
Why choose KBFU 50-1.5 M instead of a three-phase model?
The 50-1.5 M model operates on a standard 230 V power supply, which eliminates the need for a three-phase switchgear at the point of failure. With a power of 1.5 kW and a capacity of 420 l/min, it is one of the most powerful single-phase slurry pumps in the KBFU series.
What solid particles does KBFU 50-1.5 M let through?
The pump is designed to pump liquids with particles up to 5 mm in diameter - sand, construction sludge and fine aggregate. The gray cast iron rotor is covered with a heavy-abrasive chrome alloy layer that ensures resistance to intense abrasion.
Does KBFU 50-1.5 M require full immersion in water?
NO. The cooling jacket maintains a safe engine temperature even at very low water levels in the trench - the pump does not have to be completely submerged to operate safely.
Where to buy the IBO KBFU 50-1.5 M pump?
The KBFU series is available in the Dambat distribution network - from authorized sales partners, installation wholesalers and technical stores throughout Poland.
How much is the warranty for KBFU 50-1.5 M?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat, Adamów 50, Grodzisk Mazowiecki.
