IBO KBFU 150-7.5 T pump Sludge Submersible 400V
KBFU 150-7.5 T is a three-phase pump Sludge with a power of 7.8 kW, powered by 400 V with a DN 6" connection and a capacity of 2080 l/min. The largest model in the KBFU series – six-inch Connection and over 2000 l/min of flow make it suitable for industrial applications where no smaller model of the series provides the required performance.
For whom
-
Construction and infrastructure companies – Connection DN 6" and a capacity of 2080 l/min allow for quick drainage of large areas with a large catchment area.
-
Large-scale mines and mining plants – the largest model of the KBFU series for applications requiring continuous pumping of over 2000 l/min of mineral suspension.
-
Companies implementing port, river and hydrotechnical investments – big Connection and high efficiency are key parameters for large-scale regulation and drainage works.
-
Industrial plants with large permanent installations – the model works well in permanent industrial pumping station systems with the highest capacity requirements.
-
Engineers designing large drainage systems – one DN 6" pump replaces two or three smaller units, simplifying the design and reducing the number of service points.
Application
The KBFU series is designed for draining water from construction sites, mines and quarries - wherever the pumped medium contains sand, sludge and other mechanical impurities. KBFU 150-7.5 T is the top model of this series, intended for facilities and investments where the scale of drainage exceeds the capabilities of smaller units. Connection DN 6" allows you to connect pipelines with very high capacity, minimizing pressure losses at high flows.
A key element of the design is the cooling jacket surrounding the engine. Thanks to it, the pump does not have to be fully immersed in the pumped medium to maintain a safe operating temperature - the engine is cooled by the jacket wall even when the water level in the trench is very low. Thermal protection built into the motor winding provides an additional layer of protection against overheating during long-term continuous operation.
Features of the KBFU 150-7.5 T pump
- Adaptation for pumping water with sand: YES
- Cooling Jacket: YES
- Discharge port: 6" threaded, vertical direction
- Thermal protection: YES (built into the motor winding)
- Float switch: NO
- Bearings: NSK (Japan)
- Working mode: continuous
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – pump Sludge KBFU 150-7.5T
When is it profitable to buy one KBFU 150-7.5 T instead of two smaller pumps?
One DN 6" pump means simpler wiring, one service point and one control cabinet instead of two. With comparable total performance, KBFU 150-7.5 T generates lower operating costs and reduces the risk of failure resulting from the need to synchronize two devices. In the case of permanent installations, this is often a decisive argument.
What most often destroys slurry pumps of this class and how to avoid it?
With pumps of this power, the greatest risk is dry running - when the liquid level drops below the inlet, the engine overheats despite the cooling jacket. For permanent installations, we absolutely recommend an external level probe or a float switch that will stop the pump before reaching a critical level. The second common problem is pumping particles that exceed the permissible size - it blocks the impeller and overloads the engine.
Which discharge pipelines fit KBFU 150-7.5 T?
The discharge port has a DN 6 thread. The use of DN 6" pipelines and discharge hoses allows full use of the pump's capacity. Reduction to a smaller diameter will significantly increase pressure losses and reduce flow - this is especially noticeable with a pump of this class.
Where to buy the IBO KBFU 150-7.5 T pump?
The model is available from Dambat trading partners, installation wholesalers and technical stores. Due to the dimensions and weight of the device, we recommend contacting the distributor in advance to arrange delivery logistics. Dambat does not sell directly.
How much is the warranty for KBFU 150-7.5 T?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat, Adamów 50, Grodzisk Mazowiecki.