Efficient sewage disposal in single-family houses is the basis of a well-functioning plumbing system. In many cases, it is not possible to connect to the existing sewage network and it is necessary to build your own water intake. Then the investor is obliged to choose pump devices that will fulfill its task and effectively discharge sewage from home installation.
Deep pump - application
The deep pump is a vortex device, whose task is to pump water from a deep well located at a considerable depth. An important element of each pump are scapular rotors. They are responsible for increasing the moment of the rush of liquid and allow you to work at considerable depths. The pump works trouble -free provided that the appropriate security is used, which are mostly equipped by manufacturers. If the device is slightly converted, you should remember about electrical protection. Their task is to protect against voltage changes in the network, against lack of phase and other overloads that may occur in the electrical installation.
Deep -sea pumps It is used to reduce groundwater as an element of water supply systems and irrigation systems, pressing and increasing liquid pressure, and to satisfy human living needs. The pumps can also be used for pumping treated drinking water, raw or sea water. It is very important that the pumped water is free of pollution, because all impurities can cause the formation of sediment pumps harmful to the engine. In the event that the investor is aware of the formation of such settlements, remember to regularly clean, which will ensure trouble -free operation of the pump for a long time.
Hydrophore - application
The hydrophore will work both in single -family houses and on recreational plots, where There is no connection to the water supply network, and fresh water is necessary for comfortable functioning. The hydrophore is responsible for stabilizing pressure in the pipes Which allows you to enjoy a uniform stream of water flowing from the tap regardless of whether it is taken on the first floor or ground floor. Importantly, it is responsible for securing the pump by faster wear. Like many devices, the deep pump has a specific life, which is converted in the number of cycles that it can make per hour. In home installations The pump works often, but in short cycles and if it wasn't for the hydrophore tank, the pump would explore very quickly. The collected water through the pump goes to the pressure tank in which the air is located. As the amount of water increases in the tank, air pressure increases and when it gets a specific value, the pump automatically turns off. When the tap is unscrewed, the air pushes the water out of the tanks and when all the water is used and the pressure of the pump re -turns on. The cycle will start again and the pump will start working again.
