VX-80-2.2 – submersible pump with cutting impeller, 400 V
The IBO VX-80-2.2 submersible pump with a single-channel open impeller is an industrial device powered by three-phase 400 V, designed for pumping raw sewage containing fecal matter and dirty water. The impeller is equipped with a blade for cutting fibrous contaminants, while the dual independent sealing system and oil chamber protect the motor from water even if one of the seals is damaged.
Who it is for
-
Industrial plants and wastewater treatment plants – the impeller with a cutting blade handles fibrous contaminants, reducing the risk of installation blockages.
-
Sewage pumping stations and permanent installations – the option of mounting on guide rails with a foot coupling makes it easier to replace the pump without emptying the tank.
-
Companies carrying out large installations – three-phase 400 V power supply facilitates integration with switchboards and control cabinets.
-
Municipal facilities with high sewage flow rates – the dual sealing system and oil chamber protect the motor during continuous operation.
Application
The VX-80-2.2 submersible pump with a single-channel open impeller is designed for pumping raw sewage containing fecal matter and dirty water. The impeller is equipped with a blade for cutting fibrous contaminants, thereby reducing the risk of installation blockages – however, the length of the cut fibers should not exceed 80% of the pump outlet diameter.
The device operates in a vertical position, with a maximum pumped-liquid temperature of 40°C and a water pH range of 6–10. The VX-80-2.2 400 V submersible pump achieves a head of up to 13 m / 17 m at a capacity of up to 1000 / 1360 l/min.
Features of the VX-80-2.2 pump
The pump features a cast-iron construction – the motor housing, body, and impeller are made of cast iron. The shaft is made of AISI 304 stainless steel, so it does not corrode during constant contact with sewage and maintains precise impeller alignment throughout its service life.
The impeller-side seal uses a silicon carbide/silicon carbide arrangement – a hard material combination with high wear resistance and a low coefficient of friction, which extends seal life during constant contact with contaminated water. The independent second seal on the motor side operates submerged in an oil chamber, using a carbon/ceramic arrangement, cooled and lubricated with oil. This dual sealing system protects the motor from water even if the first seal is damaged. Cast-iron stands bolted to the underside of the body keep the pump at an appropriate distance from the ground, reducing the risk of inlet blockage.
- Pump type: submersible sewage pump, single-channel open impeller with cutting blade
- Power supply: 400 V (three-phase)
- Head (Hmax): 13 m / 17 m
- Capacity (Qmax): 1000 l/min / 1360 l/min
- Insulation class: F
- Protection rating: IP68
- Operating mode: continuous
- Operating position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 40°C
- Water pH: 6–10
- Power cable length: 10 m
- Switch: none – three-phase power supply requires an external control cabinet with overload protection
- Materials: motor housing and body – cast iron, impeller – gray cast iron, shaft – AISI 304 stainless steel, impeller-side gland – SiC/SiC, motor-side gland (in the oil chamber) – carbon/ceramic
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
Dambat – a trusted manufacturer of pumps and water engineering equipment with quality certificates.
Frequently asked questions (FAQ) – VX-80-2.2 submersible pump
What contaminants can the VX-80-2.2 pump impeller handle?
The open impeller with a blade cuts fibrous contaminants contained in sewage, provided that their length does not exceed 80% of the pump outlet diameter. This helps reduce the risk of installation blockages when pumping raw sewage containing fecal matter.
What are the oil chamber and dual seal used for?
The dual mechanical sealing system protects the motor from water even if the first impeller-side seal is damaged – the second seal operates submerged in the oil chamber on the motor side, providing an additional layer of protection.
How does the VX-80 pump differ from the WQ 65/80 series?
The VX-80 pump uses a single-channel open impeller with a cutting blade that cuts fibrous contaminants contained in sewage. The WQ 65/80 series features a closed two-channel impeller without a cutting function, designed for higher capacities when pumping sewage without an excess of long fibers.
Is the VX-80-2.2 pump suitable for my installation?
The pump is suitable for installations where sewage contains fibrous contaminants that need to be cut before pumping, as well as installations with a three-phase power supply. If you have any doubts, we encourage you to contact the technical department.
Where can I buy the VX-80-2.2 submersible pump?
Dambat does not sell directly. The VX-80-2.2 pump is available from commercial partners, installation wholesalers, and authorized online distributors.
What warranty terms apply to the VX-80-2.2 pump?
IBO – 24 months (2 years) manufacturer’s warranty. Warranty and post-warranty service provided by Dambat.
