VX-80-1.5 - submersible pump with 400 V cutting rotor
submersible pump The IBO VX-80-1.5 with a single-channel, open impeller is an industrial device powered by three-phase 400 V, designed for pumping raw sewage, containing feces, and dirty water. The rotor is equipped with a blade that cuts off fibrous impurities, and a double, independent sealing system with an oil chamber protects the engine against water even in the event of damage to one of the seals.
For whom
-
Industrial plants and sewage treatment plants – a rotor with a cutting blade copes with fibrous contaminants, reducing the risk of clogging the installation.
-
Sewage pumping stations and permanent installations – the possibility of mounting on guides with a foot clutch makes it easier to replace the pump without emptying the tank.
-
Companies implementing large installations – Power supply three-phase 400 V facilitates integration into switchboards and control cabinets.
-
Municipal plants with high sewage volumes – double seal system and oil chamber protect the engine during continuous operation.
Application
submersible pump VX-80-1.5 with a single-channel, open impeller is designed for pumping raw sewage, containing feces, and dirty water. The impeller is equipped with a blade that cuts fibrous impurities, which reduces the risk of clogging the installation - however, the length of the cut fibers should not exceed 80% of the pump outlet diameter.
The device operates in a vertical position, with a maximum temperature of the pumped liquid up to 40°C and water pH in the range of 6–10. submersible pump VX-80-1.5 400 V reaches a lifting height of up to 13 m / 17 m with a capacity of up to 1000 / 1360 l/min.
Features of the VX-80-1.5 pump
The pump is made of cast iron - the motor housing, body and impeller are made of cast iron. The shaft is made of AISI 304 stainless steel, so it does not corrode in constant contact with sewage and maintains precise rotor alignment throughout the entire period of operation.
The seal on the rotor side is made of silicon carbide/silicon carbide - a hard material combination with high abrasion resistance and low friction coefficient, which extends the seal life in constant contact with contaminated water. An independent, second seal on the engine side works immersed in the oil chamber, in a carbon/ceramic system, cooled and lubricated with oil. This double sealing system protects the engine against water even if the first seal is damaged. Cast iron stands screwed to the bottom of the body keep the pump at an appropriate distance from the ground, reducing the risk of clogging the inlet.
- Pump type: submersible pump for sewage, single-channel open impeller with cutting blade
- Power supply: 400V (three-phase)
- Lifting height (Hmax): 13m / 17m
- Efficiency (Qmax): 1000 l/min / 1360 l/min
- Insulation class: F
- Degree of protection: IP68
- Working mode: continuous
- Working position: vertical
- Rotational speed: 2850 rpm
- Max. liquid temperature: 40°C
- Water pH: 6–10
- Power cable length: 10 m
- Switch: none – Power supply three-phase requires an external control cabinet with overload protection
- Materials: motor housing and body – cast iron, rotor – gray cast iron, shaft – AISI 304 stainless steel, stuffing box on the rotor side – SiC/SiC, stuffing box on the engine side (in the oil chamber) – carbon/ceramics
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – submersible pump VX-80-1.5
What kind of contamination can the VX-80-1.5 pump rotor tolerate?
An open impeller with a blade cuts fibrous impurities contained in the sewage, provided that their length does not exceed 80% of the pump outlet diameter. This reduces the risk of clogging the installation when raw sewage contains feces.
What are the oil chamber and double seals for?
A double mechanical seal system protects the engine against water even if the first seal on the rotor side is damaged - the second seal works immersed in the oil chamber on the engine side, providing an additional layer of protection.
What is the difference between the VX-80 pump and the WQ 65/80 series?
The VX-80 pump uses an open single-channel impeller with a cutting blade that cuts fibrous contaminants contained in the sewage. The WQ 65/80 series has a closed two-channel impeller, without a cutting function, designed for higher effluent efficiencies without excess long fibers.
Will the VX-80-1.5 pump work in my installation?
The pump will work well in installations where sewage contains fibrous impurities that require cutting before pumping, as well as in installations with three-phase power supply. If in doubt, we encourage you to contact the technical department.
Where can you buy the VX-80-1.5 submersible pump?
Dambat does not sell directly. The VX-80-1.5 pump is available from trading partners, installation wholesalers and authorized online distributors.
What warranty conditions apply to the VX-80-1.5 pump?
IBO – 24 months (2 years) manufacturer's warranty. Warranty and post-warranty service is provided by Dambat.
