A complete home sewage pumping plant consisting of a tank, two -stage two -phase sewage pump with a crushing disk and local control system.
The supplied pumping station is ready for mounting and starting the pump. The tank is equipped with connecting connectors for connecting the inflow and sewage pressing. The pump can be easily mounted/dismantled from the tank along with piping thanks to a system cast iron hook. If the pressing pressure is required exceeds 3 bar, the UP 60-80 pump is mounted "rigidly" with a pressure circuit through stainless steel screw.
The pumping station can be used to press sewage sewage, single -family houses, offices and small industrial plants. It can be used both for pumping sewage to gravitational wells and high pressure pipelines (up to 3-5 bar).
The basic control system ensures automatic pump operation and informs (optical and sound system) with exceeding max. sewage level in the tank.
Tank:
- PEHD plastic
- Anti -displacement horizontal and vertical displacement
- Wall thickness 6-8 mm
- Tank height 2100 mm x 800 mm
- Armed with a stainless steel support beam
- Rubber throttle inlet openings
- Screws, screws, pads, nuts - stainless
Control:
- Float start -up
- Float overflowing informing about the exceeding of the alarm state in the pumping station
- Pump thermal protection
- Alarm system optical and sound, informing about the overflow of the pumping station powered by low -current 12V with type B protection
- Differential-current protection
- IP65 surface -mounted control cabinet
- Work-0-vertebral switch
- Phase disappearance and asymmetry sensor
- Transformer lowering voltage to 12 V
Armature:
- Cast iron check valve DN50
- Cutting profession DN50
- Cast iron clutching DN50
- AISI 304 DN50 pipeline
- Discharge connector D63 (connector)
- D160 inflow connector (MUFA)
Pump:
- IBO UP 60-80, two-stage
- Pump with a stainless steel cutting knife
- 3-phase, 1.5 kW, 10 m cable
- Lifting height 0-55 m
- Capacity up to 0.5-4 m3/h
- Weight 31.5 kg
