Series pumps Pi-Jet IQ PR They were designed for a wide range of applications in water, heating and refrigerated installations. Their solid construction, made of corrosion -resistant materials (Aisi 304), provides long life and high reliability in everyday use.
Application
Pi-jet IQ PR pumps are intended for:
- water installations,
- systems containing clean liquids with a viscosity similar to water, non -corrosive against AISI 304 stainless steel,
- heating and refrigeration systems,
- air conditioning and ventilation systems,
- water treatment system,
- industrial devices (e.g. cleaning, dosing, hydration, lifting pressure),
- transport of drinking and slightly chlorinated water.
Working conditions
The pump is adapted to press the liquid:
- thin, clean, unexplored and non -flammable
- devoid of solid particles and fibers.
In the case of liquid with a higher density or viscosity than water, it is recommended to use a higher power engine.
Technical data
- Liquid temperature: -20 ° C to +70 ° C
- Maximum ambient temperature: +50 ° C
- Power supply:
• Single -phase: 1 ~ 230 V / 50 Hz
• Three -phase: 3 ~ 400 V (or 3 × 230 V) / 50 Hz
- Insulation class: F
- Degree of protection: IP55
- Maximum suction depth: 8 m
- Maximum pressure in the installation: 1.0 MPa (PM10)
Engine
The pump is equipped with 2-runner induction engine. The IQ PR brand offer includes single -phase and three -phase solutions tailored to the performance and lifting the needed in each type of installation. To facilitate a larger number (three-digit) in pi-jet means pump performance: e.g. pi-jet 120-3. And an additional digit means power and ability to lift-the higher the numbering, the greater the lifting and power of the pump. Some of the models are available to order.
Materials:
Aisi 304 stainless steel: pump housing, suction and crowded diffuser, suction and crowded rotor, sleeves, spring
Plastics:
- FAKE TRANSPORT - PE (polyethylene)
- Suction valve body and (optional) the suction diffuser covers - PPA (polyamide with high thermal resistance)
- Pressure plate - Aluminum (al)
Elastomers and seals:
- Seals - EPDM (ethylene-propylene rubber)
- Mechanical seal - graphite / ceramics
