Description
PC-59 - hydrophore machine with pressure regulation
PC-59 by IBO is an electronic pressure booster that independently controls the operation of the pump and maintains constant water pressure in the installation. Unlike simpler machines, it allows you to set your own pressure thresholds and work in two modes, thanks to which it fully replaces the traditional pressure switch. The increased IP65 protection level makes it also suitable for more difficult and humid conditions.
For whom
- Installers and plumbers - adjusting the pressure thresholds with knobs allows you to precisely adjust the pump operation to a specific installation, without selecting a separate pressure switch.
- Home owners with their own water intake - the machine maintains the selected pressure and stops the pump when there is no water.
- Users requiring installations - the ability to work with or without a hydrophore tank gives you freedom in designing the system.
- Installations exposed to moisture - the IP65 housing allows the device to be installed where simpler machines would not be able to withstand it.
Application
PC-59 works well in home and garden water installations where stable pressure adjusted to the user's needs is important. It works with single-phase pumps and supports typical water consumption scenarios, from the kitchen and bathroom to watering the garden or Power supply sprinklers. The ability to adjust the switching on and off thresholds allows you to select the pressure so that the water flows evenly even at several draw-off points at the same time.
The device works with clean water without mechanical impurities and is mounted on the discharge side of the pump, in accordance with the flow direction marked on the casing. In a typical single-phase home installation, the PC-59 230 V pressure regulator recognizes water consumption based on pressure and flow, so it reacts exactly when water is actually consumed.
Features of the PC-59 machine
The operation of the PC-59 pump is determined by two values simultaneously - the pressure in the installation and the water flow in the pipe. This logic allows you to distinguish between actual water consumption and a minor leak, so that the pump does not turn on unnecessarily in the event of small leaks. The switching on and off thresholds are set by the user using two knobs located under the manometer, and the levels marked on its dial make it easier to precisely adjust the device. It is this regulation that allows the PC-59 to fully take over the role of a traditional pressure switch.
The device offers two operating modes switched by the Function button, which allows you to adapt its operation to installations with or without a hydrophore tank. The built-in check valve prevents water from flowing back into the pump, and the pressure gauge constantly shows the pressure in the system. The device status is indicated by LEDs indicating power supply, pump operation and possible failure. Dry-running protection and overload protection protect the pump against damage, and when the protection is activated, operation is resumed manually. The IP65 protection class housing ensures dust and moisture resistance higher than in simpler pressure booster machines.
- Brand: IBO
- Type: hydrophore machine for single-phase pumps
- Power supply: 230V, 50Hz
- Maximum power of the supported pump: 1.1 kW
- Maximum current: 10A
- Turn-on pressure: 1.5 bar (adjustable)
- Maximum system pressure: 10 bar
- Degree of protection: IP65
- Security: dry running protection, overload protection
- Equipment: pressure regulation, two operating modes, built-in non-return valve, pressure gauge, signaling diodes, Function button
- Maximum water temperature: 40°C
- Connections: 1" / 1"
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – PC-59 machine
What is the PC-59 machine used for?
PC-59 is a hydrophore automat that independently controls the pump and maintains constant water pressure in the installation. The pump starts when someone turns on the tap and stops when the intake is closed. By adjusting the pressure thresholds, the device replaces a traditional pressure switch and at the same time protects the pump against dry running.
How does PC-59 differ from simpler pressure booster machines?
The most important difference is the ability to set the operating pressure yourself. The switching on and off thresholds are adjusted using two knobs under the pressure gauge, and the operating mode is switched using the Function button, which allows you to adapt the machine to installations with or without a hydrophore tank. Simpler machines have fixed settings, while PC-59 allows you to adjust the pressure to the needs of a specific installation. Additionally, the IP65-rated housing resists dust and moisture better.
What pumps does PC-59 work with?
The machine is designed for single-phase pumps with a power of up to 1.1 kW and a current consumption of up to 10 A, with a 230 V power supply. It should work with clean water without mechanical impurities, because dirt may disturb the measurement and operation of the device.
Does PC-59 protect the pump against dry running?
Yes. When there is no water in the installation, the automatic device stops the pump, protecting it against overheating and damage. PC-59 also protects the pump against overload. After the protection has been activated, work is resumed manually after the cause has been removed.
Can PC-59 work without a hydrophore tank?
Yes. PC-59 can work both with and without a hydrophore tank. Working with a tank limits the frequency of switching on the pump when water consumption is low, so it is worth using it in many home installations, although it is not required.
Where to buy the PC-59 machine?
As a manufacturer, we do not sell directly. The IBO PC-59 automatic machine can be purchased from our trading partners, installation wholesalers and authorized online distributors. The full offer of machines and controllers can be found in the category drivers.
What is the warranty for the PC-59 machine?
IBO – 24 months (2 years) manufacturer's warranty.
- Type: Pump controller,
- Number of supported pumps: 1,
- Maximum power: 1.1 kW,
- Power supply: ,
- Frequency: 50 Hz,
- Maximum Current Supported: 10.0 A
- Degree of protection: IP65
- Maximum liquid temperature: 40°C
- Dimensions: mm,
- Weight: 1.0 kg.
PC-59 - hydrophore machine with pressure regulation
PC-59 by IBO is an electronic pressure booster that independently controls the operation of the pump and maintains constant water pressure in the installation. Unlike simpler machines, it allows you to set your own pressure thresholds and work in two modes, thanks to which it fully replaces the traditional pressure switch. The increased IP65 protection level makes it also suitable for more difficult and humid conditions.
For whom
- Installers and plumbers - adjusting the pressure thresholds with knobs allows you to precisely adjust the pump operation to a specific installation, without selecting a separate pressure switch.
- Home owners with their own water intake - the machine maintains the selected pressure and stops the pump when there is no water.
- Users requiring installations - the ability to work with or without a hydrophore tank gives you freedom in designing the system.
- Installations exposed to moisture - the IP65 housing allows the device to be installed where simpler machines would not be able to withstand it.
Application
PC-59 works well in home and garden water installations where stable pressure adjusted to the user's needs is important. It works with single-phase pumps and supports typical water consumption scenarios, from the kitchen and bathroom to watering the garden or Power supply sprinklers. The ability to adjust the switching on and off thresholds allows you to select the pressure so that the water flows evenly even at several draw-off points at the same time.
The device works with clean water without mechanical impurities and is mounted on the discharge side of the pump, in accordance with the flow direction marked on the casing. In a typical single-phase home installation, the PC-59 230 V pressure regulator recognizes water consumption based on pressure and flow, so it reacts exactly when water is actually consumed.
Features of the PC-59 machine
The operation of the PC-59 pump is determined by two values simultaneously - the pressure in the installation and the water flow in the pipe. This logic allows you to distinguish between actual water consumption and a minor leak, so that the pump does not turn on unnecessarily in the event of small leaks. The switching on and off thresholds are set by the user using two knobs located under the manometer, and the levels marked on its dial make it easier to precisely adjust the device. It is this regulation that allows the PC-59 to fully take over the role of a traditional pressure switch.
The device offers two operating modes switched by the Function button, which allows you to adapt its operation to installations with or without a hydrophore tank. The built-in check valve prevents water from flowing back into the pump, and the pressure gauge constantly shows the pressure in the system. The device status is indicated by LEDs indicating power supply, pump operation and possible failure. Dry-running protection and overload protection protect the pump against damage, and when the protection is activated, operation is resumed manually. The IP65 protection class housing ensures dust and moisture resistance higher than in simpler pressure booster machines.
- Brand: IBO
- Type: hydrophore machine for single-phase pumps
- Power supply: 230V, 50Hz
- Maximum power of the supported pump: 1.1 kW
- Maximum current: 10A
- Turn-on pressure: 1.5 bar (adjustable)
- Maximum system pressure: 10 bar
- Degree of protection: IP65
- Security: dry running protection, overload protection
- Equipment: pressure regulation, two operating modes, built-in non-return valve, pressure gauge, signaling diodes, Function button
- Maximum water temperature: 40°C
- Connections: 1" / 1"
IBO – 24 months (2 years) manufacturer's warranty.
Dambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.
Frequently asked questions (FAQ) – PC-59 machine
What is the PC-59 machine used for?
PC-59 is a hydrophore automat that independently controls the pump and maintains constant water pressure in the installation. The pump starts when someone turns on the tap and stops when the intake is closed. By adjusting the pressure thresholds, the device replaces a traditional pressure switch and at the same time protects the pump against dry running.
How does PC-59 differ from simpler pressure booster machines?
The most important difference is the ability to set the operating pressure yourself. The switching on and off thresholds are adjusted using two knobs under the pressure gauge, and the operating mode is switched using the Function button, which allows you to adapt the machine to installations with or without a hydrophore tank. Simpler machines have fixed settings, while PC-59 allows you to adjust the pressure to the needs of a specific installation. Additionally, the IP65-rated housing resists dust and moisture better.
What pumps does PC-59 work with?
The machine is designed for single-phase pumps with a power of up to 1.1 kW and a current consumption of up to 10 A, with a 230 V power supply. It should work with clean water without mechanical impurities, because dirt may disturb the measurement and operation of the device.
Does PC-59 protect the pump against dry running?
Yes. When there is no water in the installation, the automatic device stops the pump, protecting it against overheating and damage. PC-59 also protects the pump against overload. After the protection has been activated, work is resumed manually after the cause has been removed.
Can PC-59 work without a hydrophore tank?
Yes. PC-59 can work both with and without a hydrophore tank. Working with a tank limits the frequency of switching on the pump when water consumption is low, so it is worth using it in many home installations, although it is not required.
Where to buy the PC-59 machine?
As a manufacturer, we do not sell directly. The IBO PC-59 automatic machine can be purchased from our trading partners, installation wholesalers and authorized online distributors. The full offer of machines and controllers can be found in the category drivers.
What is the warranty for the PC-59 machine?
IBO – 24 months (2 years) manufacturer's warranty.
