A machine controlling the operation of surface and deep pumps. Replaces the pressure switch and hydrophore tank. Unscrewing the tap gives a signal to the PC-16 machine, which launches the pump. Craction of the tap causes the PC-16 to turn off the pump. The machine can operate with single -phase pumps up to 1300 W, which power consumption during operation does not exceed 10 A. The device has a dry provision function. When the water runs out in the well, the device turns off the pump. PC-16 differs from other drivers with a restart function. The PC-16 has an automatic restart function. It consists in the fact that after some time from stopping caused by a dry -one, the device tries to reassure the pump operation automatically. If the water still does not flow into the well, the device turns the pump again. The cycle will be repeated several times per day from the first shutdown. This solution is the best for automatic irrigation. The device is easy to install. It has a power cable with a 1 m long plug and an electrical socket for connecting the pump. The PC-16 is equipped with a diameter of 1 ".
Parameters
- Sucking/pressure connector: 1 ",
- Built -in check valve,
- Protection against drywood,
- Built -in pressure gauge,
- Manual Reset button,
- Power power diode,
- Diode signaling the ON pump operation,
- Diode signaling the failure of the Failure,
- Automatic restart
Technical data
- Supply voltage: 1 ~ 230 V,
- Protection degree: IP65,
- Maximum water temperature: 40 ° C,
- Switching pressure - 1.5-3 bar,
- Permissible maximum pressure in the system: 10 bar,
- Maximum current 10 A (at starting 16 AND).
