Intelligent pump controller - model IVR 02 m - is a control and protection device for direct connection of single -phase deep pumps, surface pumps, submersible pumps, etc., with a capacity of 0.37 kW to 1.5 kW (from 0.5 HP to 2 HP) maintaining a fixed, provided water pressure by changing the speed of the pump engine. Model IVR 02 M (also known as an inverter or inverter) has many operational modes by adapting to various electrical installations.
CHARACTERISTICS
- Energy efficiency: Compared to a traditional method, a water supply system with a constant pressure with a frequency converter saves energy by 30 - 60 %.
- Long -term reliability of cooperating pumps: average torque and abrasion on the shaft decreases due to the decrease in average speed, which ensures longer pump life.
- The built-in Soft-Start function and mild stopping of the device allows you to eliminate a hydraulic impact (the effect of a hydraulic impact means a sudden increase in pressure, accompanying a rapid stop or starting liquid flow).
- Comprehensive protection: The system has the most versatile technology of hypertension, overvoltage, undercoat, short -circuit, blocking the rotors, the ability to protect the pump against dry -one without the need to install probes/sensors in the well.
- Possibility to control the operation of two pumps supplying the system.
APPLICATION
Model IVR 02 M
Estimated typical use:
- supplying water from a well,
- irrigation of greenhouses, gardens and fields,
- collecting and using rainwater,
- water supply installation.
Parameters
- Power: 0.37-1.5 kW,
- Power supply: 1 ~ 230 V permissible fluctuations (160-260 V),
- Rated output voltage: 1 ~ 230 V,
- Rated output voltage of the second pump: 1 ~ 230 V / 50 Hz,
- Electricity: 12 A,
- Frequency at the entrance: 50/60 Hz,
- Exit frequency: 20-50/60 Hz,
- Triggered response time with overload: 5 s - 5 min.,
- Pressure setting range: 1-9 bar,
- Triggered response time with an open phase: <5 s,
- Liberated response time at short circuit: <0.1 s,
- Triggered response time at too low/high voltage: <5 s,
- Liberated response time with dry -one: 6 s,
- Resumption time after overload: 30 min.,
- Resumption time at too low/high voltage: 5 min.
- Time of resumption at the dry -woman: 8 s, 1 min., 10 min., 30 min., 1 H, 2 H ...,
- Switch -off threshold at too high voltage: 270 V,
- Switch -off threshold at too low 100 V voltage,
- Fluid level transfer distance: ≤ 1000 m,
- Protection functions:
- Dry -work,
- Short circuit,
- Overload,
- Overloaded pump,
- A sudden leap of voltage,
- Sudden voltage drop,
- Sudden increase in tension,
Basic technical characteristics
- Control characteristics:
- Double flow control,
- Pressure control,
- Control method:
- Flow control characteristics: Impulse of the test electrode and flow switch,
- Pressure control characteristics: 24 V, 4-20 MA pressure sensor.
