Dambat Jastrzębski Spółka Komandytowo-Akcyjna with its registered office in Adamów informs that part of the product sold in the period from 2021 to 2023: submersible pump with a shredder, type FURATE 750 IBO POLAND, EAN code: 590111344405, does not meet the requirements of the Regulation of the Minister of Development of June 2, 2016 on the requirements for electrical equipment, due to the use of the power cord of low length (the length of the power cord required is at least 10 m), which may hinder the possibility of proper connection of the power cord and causes its additional stresses, which results in electrical short -circuit, which creates a risk of paralysis of the user's electricity. The announcement is published in connection with the proceedings conducted before the President of the Office of Competition and Consumer Protection.
×
Hung on the picture to bring closerClick on the picture to enlarge it
/
Description
Diaphragm what Basic are designed for use in heating and solar systems. Used in installations to maintain and level the pressure, the changes of which result from the increase in volume and the temperature of the factor. The main function of diaphragmatic vessels is to prevent excessive pressure increase in closed installations.
In the interior of the steel vessel there is a replaceable membrane - EPDM (synthetic rubber), characterized by high tensile strength and resistance to high temperatures, separating the liquid from the space occupied by the air. The tanks are equipped with a pressure regulating valve inside the vessel and a replaceable flang, made of galvanized steel with a diameter of a 3/4 "connection connector.
The vessels are intended for installation in which the glycol content does not exceed 50%. Hanging dishes: 8 l / 12 l / 19 l / 24 l Standing dishes: 36 l / 50 l / 80 l / 100 l
Diaphragm: YES,
Installation position: Vertical,
Connection: 3/4",
Manometer: NO,
Maximum tested pressure: 12.0 bar,
Preliminary pressure: 1.5 ±10%,
Working pressure: 8.0 bar,
Operating temperature: from 0° C to 100° C,
Dimensions: Ø45/76 cm
Libra: 25.0 kg,
Material
• Corps: Carbon steel covered with varnish,
• Plan: EPDM.
Diaphragm what Basic are designed for use in heating and solar systems. Used in installations to maintain and level the pressure, the changes of which result from the increase in volume and the temperature of the factor. The main function of diaphragmatic vessels is to prevent excessive pressure increase in closed installations.
In the interior of the steel vessel there is a replaceable membrane - EPDM (synthetic rubber), characterized by high tensile strength and resistance to high temperatures, separating the liquid from the space occupied by the air. The tanks are equipped with a pressure regulating valve inside the vessel and a replaceable flang, made of galvanized steel with a diameter of a 3/4 "connection connector.
The vessels are intended for installation in which the glycol content does not exceed 50%. Hanging dishes: 8 l / 12 l / 19 l / 24 l Standing dishes: 36 l / 50 l / 80 l / 100 l
IBO
Yes
3/4
Vertical
100
25.0
• Corps: Carbon steel covered with varnish,
• Plan: EPDM.
8.0
YES
NO
1.5
12.0
0
Ø45/76
Yes
NO
NO
NO
["gid://shopify/GenericFile/52798164992343"]
NO
Hung on the picture to bring closerClick on the picture to enlarge it
