Specific pumps from the series Bolo 2300 They are designed for pumping clean and contaminated water, for pumping septic tanks, sewage and rainwater. The pumps can be installed with a flexible discharge hose or bolted to a rigid discharge pipeline. They have a free flight under a 50 mm rotor.
They can be used in households when emptying septic tanks, pumping water from flooded rooms, etc. in industry, agriculture, and in all professional applications requiring a strong submersible sewage pump and contaminated water.
The content of permanent parts in water cannot be greater than 10%. The pumps are designed for pumping water without the content of solids and sanding parts.
The pump switch on when providing a 220-240 V power supply from a typical network socket. The pump is cooled by the surrounding water. It should be remembered that the pump cannot work long, the engine body should always be immersed at least to the field of its height.
When overloading the engine, built into stator windings, thermal protection will turn off the pump. Built -in Float The controller ensures an adequate level of switching on and off the pump.
Characteristics:
- The highest quality materials,
- Float switch controlling the pump operation and protecting against dry work,
- With engine overload, built into stator windings, thermal protection that will turn off the pump,
- Warranty and post -warranty service,
- 24 months warranty.
Technical data:
- Maximum liquid temperature: 35 ° C
- Power supply: 230 V
- Insulation class: b
- Working mode: continuous
- Protection degree: IP68
- Power cable length: 10 m
- Work position: vertical
- Engine speed: 2800 rpm
