submersible pump Ibo Drain 400
Sewage pump, septic tank and rainwater with built -in swimmer and thermal protection. Designed for continuous S1 work with full immersion. Cooling takes place through the surrounding water.
The most important features
- Ready to work after connecting to the socket 220–240 V / 50 Hz.
-
Built -in Float - automatic switching/off; Possibility of adjusting the level by changing the length of the float.
-
Thermal protection - turns off the pump with overload.
- Installation: with a flexible pressure hose or a rigid pipeline.
- Adapted for pumping clean and contaminated water (solid parts up to 35 mm; content of solid parts ≤ 10%; without abrasive materials like sand/gravel).
Application
- Households: emptying septic tanks, pumping water from flooded rooms, wells, tanks.
- Industry, agriculture and professional applications requiring a strong sewage pump and rainwater.
Working conditions
- Power voltage: 220–240 V / 50 Hz (AC).
- Temperature of pumped water: to 35 ° C.
- Maximum immersion depth: 3 m.
- Work position: vertical in tanks/tanks.
-
Attention: The pump must not work for a long time - the engine body should be immersed at least to half the height.
Technical data
| Model |
Drain 400 |
| Engine power |
400 W |
| Power supply |
220–240 V / 50 Hz |
| Current (imax) |
1.5 A |
| Turnover |
2850 RPM |
| Degree of protection |
IPX8 |
| Lifting (Hmax) |
5 m |
| Performance (Q) |
150 l/min |
| Flight under the rotor |
35 mm |
| Work mode |
Continuous S1 (with full immersion) |
Dimensions and weight
- Height: 42.5 cm
- Width: 27.5 cm
- Depth: 24 cm
- Weight: 4.2 kg
Extending cables - required cross -sections
| Voltage / frequency |
Cable length |
Minimum vein cross -section |
| 230–240 V / 50 Hz |
up to 20 m |
1.0 mm² |
| 230–240 V / 50 Hz |
20-50 m |
2.5 mm² |
Safety tips
- Do not run "dry". Ensure the body body body at least up to half the height.
- Do not pump abrasive liquids (e.g. sand, gravel). The content of fixed parts should not exceed 10%.
- Ensure the correct grounding and use extensioners with an appropriate cross -section.
FAQ - the most frequently asked questions about the IBO DRAIN 400 submersible pump
What is the Ibo Drain 400 pump for?
Pump Ibo Drain 400 It is used to pump clean and contaminated water, including sewage, rainwater and septic tank content. Thanks to the flight under the rotor up to 35 mm, it copes with small particles of small size, which makes it ideal for use in households, industry and agriculture.
Can the pump work "dry"?
NO. Dry work threatens with overheating and damage to the pump. The engine body should always be immersed at least half of its height, and preferably completely to ensure adequate water cooling.
How built -in works Float?
Float Automatically turns on and off the pump depending on the water level. You can adjust the level of switching on and switching off the pump, changing the length of the float.
What are the parameters of the pump?
The pump has a power of 400 W, maximum performance 150 l/min, lifting height up to 5 m and can work at a depth of immersion up to 3 m. The degree of protection IPX8 means that it is fully adapted to work under water.
Does the pump cope with sand or gravel?
It is not recommended to pump abrasive liquids such as sand or gravel, because they can use the pump working elements. The pump is intended for clean or slightly contaminated water, with the content of solid parts up to 10% and the maximum particle size of 35 mm.
What are the requirements for extension cords?
For cables up to 20 m long, use cables with a cross -section of at least 1.0 mm². With a length of 20 to 50 m, a minimum cross -section of 2.5 mm² is required to ensure the correct operation of the device and avoid voltage drops.
Where to buy iBO devices and pumps?
