{"product_id":"sk-30-1-1-4-intelignetny-wylacznik","title":"SK-30 1¼\" switch, intelligent pump controller","description":"\u003cp\u003eThe SK-30 controller is designed to control the pump by turning the device on and off. Turning on depends on the water pressure in the water installation dropping below the minimum pressure set on the device and on the creation of flow in the pipe on which the SK-30 device is installed. Turning off depends on stopping the water flow in the pipe on which the SK-30 regulator is installed.\u003c\/p\u003e\n\u003cp\u003eThe device turns the pump on when you turn on the water tap or open the sprinklers, and turns it off when the tap or sprinklers are closed. The device has a dry-running protection function (operation of the pump without water), i.e. if there is no water in the SK-30 device, the pump automatically turns off, preventing its destruction. The device can operate directly connected to pumps whose motors do not consume more current than 30 A during operation.\u003c\/p\u003e\n\u003cp\u003eThe device protects the installation against flooding due to small leaks.\u003c\/p\u003e\n\u003cp\u003eThe device is designed to work with clean water without mechanical impurities.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in check valve\u003c\/li\u003e\n\u003cli\u003eDry-running protection\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure gauge\u003c\/li\u003e\n\u003cli\u003eProtection against overvoltage and low voltage\u003c\/li\u003e\n\u003cli\u003eManual \"AUTO \/ RESET\" switch\u003c\/li\u003e\n\u003cli\u003eIndicating diode Power supply \"Power on\"\u003c\/li\u003e\n\u003cli\u003eLED indicating pump operation \"Pump on\"\u003c\/li\u003e\n\u003cli\u003eFlashing \"Water shortage (flash)\" diode indicating lack of water\u003c\/li\u003e\n\u003cli\u003eFlashing \"AUTO \/ RESET\" LED indicating frequent switching on and off\u003c\/li\u003e\n\u003cli\u003eAutomatic tuning to your installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe device can be installed by a person who thoroughly knows the operating instructions and has appropriate hydraulic and electrical qualifications.\u003c\/p\u003e\n\u003cp\u003eThe device can operate in installations where clean water without iron or iron oxides is pumped. Operating the device with dirty water will lead to its failure.\u003c\/p\u003e\n\u003cp\u003eThe device must be installed on the discharge side of the pump in a vertical position between the pump and the first water receiver (see drawing).\u003c\/p\u003e\n\u003cp\u003eTo increase work flexibility, install a small expansion vessel, e.g. 5 liters.\u003c\/p\u003e\n\u003cp\u003eWhen installing, pay attention to the direction of water flow through the device. There is an arrow embossed on the housing showing the correct flow direction.\u003c\/p\u003e\n\u003cp\u003eIf the device is to operate in an installation where the pressure is over 10 bar, a pressure reducer must be installed upstream of the device to reduce the pressure in the device.\u003c\/p\u003e\n\u003cp\u003eIt is best to seal the connections of the SK-30 machine with pipes with Teflon tape. The switch-on pressure of the device can be adjusted from 0 to 10 bar. The device can work with a pump that creates a pressure of not less than 2 bar at the entrance to the SK-30 machine.\u003c\/p\u003e\n\u003cp\u003eDue to possible flow disruptions between the pump and the device, non-return valves should not be installed between the devices.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":50321565483351,"sku":"KAT01176","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/SK-30_c.png?v=1743586817","url":"https:\/\/dambat.pl\/en\/products\/sk-30-1-switch-intelligent-pump-controller-1","provider":"DAMBAT Jastrzębski S.K.A.","version":"1.0","type":"link"}