{"title":"Free pump testers!","description":"","products":[{"product_id":"beta-2-25-40-180-pompa-obiegowa-ze-srubunkami","title":"BETA 2 25-40\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. The BETA pump is equipped with an electronic processor that automatically controls the pump's operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. the processor used allows you to choose one of 8 operating modes depending on the installation needs. Power consumption is 1\/10 to 1\/3 less than classic pumps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePump \u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e has 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eCirculation pump \u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466077622615,"sku":"002027","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/BETA225-60_180.png?v=1699013030"},{"product_id":"beta-2-25-60-180-pompa-obiegowa-ze-srubunkami","title":"BETA 2 25-60\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. The BETA pump is equipped with an electronic processor that automatically controls the pump's operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. the processor used allows you to choose one of 8 operating modes depending on the installation needs. Power consumption is 1\/10 to 1\/3 less than classic pumps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eCirculation pump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ebest suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466078146903,"sku":"002028","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/BETA225-60_180.png?v=1699013030"},{"product_id":"beta-2-25-60-130-pompa-obiegowa-ze-srubunkami","title":"BETA 2 25-60\/130 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. The BETA pump is equipped with an electronic processor that automatically controls the pump's operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. the processor used allows you to choose one of 8 operating modes depending on the installation needs. Power consumption is 1\/10 to 1\/3 less than classic pumps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eCirculation pump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ebest suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466087190871,"sku":"002445","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/BETA_2_130.png?v=1724157286"},{"product_id":"magi-2-25-60-180-pompa-obiegowa","title":"MAGI 2 25-60\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MAGI series circulation pump is equipped with a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump capacity to meet the actual needs of the system.\u003c\/p\u003e\n\u003cp\u003eThe pump control panel is placed on top of the engine, which makes it much easier for the user to operate. The current electricity consumption is displayed on the panel dial. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and an adapter for the power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 pump has 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehandicap\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e\n\u003cp\u003eThe pump has\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3 YEAR WARRANTY\u003c\/strong\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466087682391,"sku":"002478","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/MAGI_2_25_60_180_1.png?v=1774255462"},{"product_id":"magi-2-25-80-180-pompa-obiegowa","title":"MAGI 2 25-80\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MAGI series circulation pump is equipped with a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump capacity to meet the actual needs of the system.\u003c\/p\u003e\n\u003cp\u003eThe pump control panel is placed on top of the engine, which makes it much easier for the user to operate. The current electricity consumption is displayed on the panel dial. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and an adapter for the power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 pump has 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHandicap\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e\n\u003cp\u003eThe pump has\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3 YEAR WARRANTY\u003c\/strong\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466088108375,"sku":"002575","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/MAGI_2_25_60_180_1.png?v=1774255462"},{"product_id":"magi-2-32-80-180-pompa-obiegowa","title":"MAGI 2 32-80\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MAGI series circulation pump is equipped with a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump capacity to meet the actual needs of the system.\u003c\/p\u003e\n\u003cp\u003eThe pump control panel is placed on top of the engine, which makes it much easier for the user to operate. The current electricity consumption is displayed on the panel dial. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and an adapter for the power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 pump has 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehandicap\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e\n\u003cp\u003eThe pump has\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3 YEAR WARRANTY\u003c\/strong\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466088141143,"sku":"002576","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/MAGI_2_25_60_180_1.png?v=1774255462"},{"product_id":"magi-2-25-40-180-pompa-obiegowa","title":"MAGI 2 25-40\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MAGI series circulation pump is equipped with a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump capacity to meet the actual needs of the system.\u003c\/p\u003e\n\u003cp\u003eThe pump control panel is placed on top of the engine, which makes it much easier for the user to operate. The current electricity consumption is displayed on the panel dial. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and an adapter for the power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 pump has 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e (factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLPP\u003c\/strong\u003e \/ \u003cstrong\u003eHPP\u003c\/strong\u003e - proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCP\u003c\/strong\u003e \/ \u003cstrong\u003ehandicap\u003c\/strong\u003e - constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e \/\u003cstrong\u003e II\u003c\/strong\u003e \/\u003cstrong\u003e III\u003c\/strong\u003e - constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e\n\u003cp\u003eThe pump has \u003cstrong\u003e3 YEAR WARRANTY\u003c\/strong\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466088173911,"sku":"002577","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/MAGI_2_25_60_180_1.png?v=1774255462"},{"product_id":"magi-2-25-60-130-pompa-obiegowa","title":"MAGI 2 25-60\/130 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MAGI series circulation pump is equipped with a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump capacity to meet the actual needs of the system.\u003c\/p\u003e\n\u003cp\u003eThe pump control panel is placed on top of the engine, which makes it much easier for the user to operate. The current electricity consumption is displayed on the panel dial. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and an adapter for the power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 pump has 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eHPP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehandicap\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eThe MAGI 2 circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e\n\u003cp\u003eThe pump has\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3 YEAR WARRANTY\u003c\/strong\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466088206679,"sku":"002578","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/MAGI_2_25_60_180_1.png?v=1774255462"},{"product_id":"amg-25-40-180-pwm-pompa-obiegowa-ze-srubunkami","title":"AMG 25-40\/180 circulation pump with PWM support and screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466089550167,"sku":"002689","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMG180.png?v=1698158071"},{"product_id":"amg-25-60-180-pwm-pompa-obiegowa-ze-srubunkami","title":"AMG 25-60\/180 circulation pump with PWM support and screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466089582935,"sku":"002690","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMG180_04f8eb0f-c1cd-4077-9b30-eada2fdb53c6.png?v=1698158092"},{"product_id":"amg-25-60-130-pwm-pompa-obiegowa-ze-srubunkami","title":"AMG 25-60\/130 circulation pump with PWM support and screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466089615703,"sku":"002691","price":999999.99,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMG130_ba7a11ed-35b2-4a99-a6b5-02b99d80758a.png?v=1698158049"},{"product_id":"amg-15-60-130-pwm-pompa-obiegowa-ze-srubunkami","title":"AMG 15-60\/130 circulation pump with PWM support and screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003cbr\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466089648471,"sku":"002692","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMG130.png?v=1698157880"},{"product_id":"amg-25-80-180-pwm-pompa-obiegowa-ze-srubunkami","title":"AMG 25-80\/180 circulation pump with PWM support and screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466089681239,"sku":"002693","price":999999.99,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMG180_02d965c1-598f-4cde-aab6-c08704b655e1.png?v=1698158148"},{"product_id":"amg-32-80-180-pwm-pompa-obiegowa-ze-srubunkami","title":"AMG 32-80\/180 circulation pump with PWM support and screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466089714007,"sku":"002694","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMG180_775ff38b-e83b-4972-bc24-0c709119e41f.png?v=1698237014"},{"product_id":"beta-2-25-60-130-br-pompa-obiegowa-ze-srubunkami","title":"BETA 2 25-60\/130 circulation pump with bronze body","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. The BETA pump is equipped with an electronic processor that automatically controls the pump's operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. the processor used allows you to choose one of 8 operating modes depending on the installation needs. Power consumption is 1\/10 to 1\/3 less than classic pumps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCirculation pump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ebest suited for the following systems:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstant temperature heating system with variable flow\u003c\/li\u003e\n\u003cli\u003eHeating system with variable pipeline temperature\u003c\/li\u003e\n\u003cli\u003eHeating system with night mode\u003c\/li\u003e\n\u003cli\u003eAir conditioning system\u003c\/li\u003e\n\u003cli\u003eIndustrial circulation system\u003c\/li\u003e\n\u003cli\u003eHome central heating system and domestic hot water system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466181693783,"sku":"003118","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/BETA225_60_130Braz.jpg?v=1699013147"},{"product_id":"amg-25-80-130-pwm-pompa-obiegowa-ze-srubunkami","title":"AMG 25-80\/130 circulation pump with PWM support and screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466203812183,"sku":"003468","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMG130_11fc4930-7552-4f3d-810b-0ad9c4f84085.png?v=1698158126"},{"product_id":"e-ibo15-14-pompa-cyrkulacyjna-cwu-do-wody-pitnej","title":"E-IBO 15-14 (9 W, 230 V) DHW circulation pump for drinking water","description":"\u003cp class=\"MsoNormal\"\u003eEnergy-saving, electronic circulation pumps for hot water meet the requirements for energy class A pumps. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eE-IBO 15-14 pumps are designed for continuous operation for forcing the circulation of domestic hot water and in small heating systems. Pumps can be used in ventilation and air conditioning systems. The use of circulation pumps allows for significant savings in water consumption.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eCompared to traditional circulation pumps, thanks to the use of a permanent magnet motor in the rotor, the energy consumption of E-IBO pumps is very low and, depending on the installation, can reach up to 3W. The pumps are equipped with a spherical rotor operating in various planes.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFEATURES:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003ePossibility of automatic or manual adjustment of pump parameters to the installation characteristics.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003eA spherical rotor made of PPO polymer ensures mobility in various planes.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003eCeramic shaft with high abrasion resistance.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003eCable with a plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eADVANTAGES:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003eEasy installation and commissioning.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003eLow energy consumption.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003eHigh energy efficiency thanks to the use of a permanent magnet in the motor rotor.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003eHigh comfort of use.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003eSolid construction.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003eLow noise level of the pump and the entire system.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003eWarranty and post-warranty service.\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo2; tab-stops: list 36.0pt;\"\u003e24-month warranty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46689534902615,"sku":"001164","price":999999.99,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/E-IBO_15-14_1.png?v=1767868284"},{"product_id":"amg-solar-25-80-180-pompa-obiegowa-z-kablem-pwm","title":"AMG SOLAR 25-80\/180 circulation pump with PWM cable","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. Equipped with an electronic processor that automatically controls its operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. The AMG pump has a processor that allows you to select one of 10 operating modes depending on the installation needs. Power consumption is from 1\/10 to 1\/3 compared to classic pumps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003eThe AMG SOLAR circulation pump is best suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":49225960849751,"sku":"003668","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/AMGSOLAR.png?v=1734430787"},{"product_id":"beta-2-25-80-180-pompa-obiegowa-ze-srubunkami","title":"BETA 2 25-80\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. The BETA pump is equipped with an electronic processor that automatically controls the pump's operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. the processor used allows you to choose one of 8 operating modes depending on the installation needs. Power consumption is 1\/10 to 1\/3 less than classic pumps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eCirculation pump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ebest suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":49225973399895,"sku":"003718","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/BETA225-80-180.png?v=1734432441"},{"product_id":"beta-2-32-80-180-pompa-obiegowa-ze-srubunkami","title":"BETA 2 32-80\/180 circulation pump with screw connections","description":"\u003cp\u003eEnergy-saving, electronic circulation pump meeting the requirements for energy class A pumps. \u003cstrong\u003eEEI≤0.23\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump is designed to force circulation in central heating systems and solar installations. The BETA pump is equipped with an electronic processor that automatically controls the pump's operation, which, combined with a frequency converter, allows for significant savings in electricity consumption. the processor used allows you to choose one of 8 operating modes depending on the installation needs. Power consumption is 1\/10 to 1\/3 less than classic pumps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe pump set includes a set of screw connections and a power cord.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas 8 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECO\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(factory settings) - from the highest to the lowest proportional pressure characteristic curve,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- proportional pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCP2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant pressure curves,\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eIII\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- constant speed curves. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAPPLICATION\u003c\/p\u003e\n\u003cp\u003eCirculation pump\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eBETA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ebest suited for the following systems:\u003cbr\u003e• Constant temperature heating system with variable flow\u003cbr\u003e• Heating system with variable pipeline temperature\u003cbr\u003e• Heating system with night mode\u003cbr\u003e• Air conditioning system\u003cbr\u003e• Industrial circulation system\u003cbr\u003e• Home central heating system and domestic hot water system\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":49225973596503,"sku":"003719","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/BETA232-80-180.png?v=1734432479"},{"product_id":"e-ibo-pro-15-14-pompa-cyrkulacyjna-do-wody-pitnej","title":"E-IBO PRO 15-14 (9 W, 230 V) DHW circulation pump for drinking water","description":"\u003cp class=\"MsoNormal\"\u003eEnergy-saving, electronic circulation pumps for domestic hot water. meeting the requirements for energy class A pumps.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003ePumps \u003cstrong\u003eE-IBO 15-14\u003c\/strong\u003e and \u003cstrong\u003eE-IBO PRO 15-14\u003c\/strong\u003e are intended for continuous operation when forcing the circulation of hot utility water and in small heating systems. Pumps can be used in ventilation and air conditioning systems. The use of circulation pumps allows for significant savings in water consumption. Compared with traditional circulation pumps, thanks to the use of a permanent magnet motor in the rotor, the energy consumption of the pumps in the series is lower \u003cstrong\u003eE-IBO PRO\u003c\/strong\u003e is very low and can reach, depending on the installation, even 3W. The pumps are equipped with a spherical rotor operating in various planes.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003ePossibility of automatic or manual adjustment of pump parameters to the installation characteristics\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eThe spherical rotor made of PPO polymer ensures mobility in various planes\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eCeramic shaft, abrasion resistant\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eBody made of stainless steel\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eCable with a plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003eEasy installation and commissioning\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eLow energy consumption\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eHigh energy efficiency is achieved thanks to the use of a permanent magnet in the motor rotor\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eHigh comfort of use\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eSolid construction\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eLow noise level of the pump and the entire system\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e24-month warranty, warranty and post-warranty service\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":49225974579543,"sku":"003763","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/E-IBO_PRO_1.png?v=1767868307"},{"product_id":"panda-25-40-180-pompa-obiegowa-ze-srubunkami","title":"Panda 25-40\/180 circulation pump with screw connections","description":"\u003cp\u003eSeries circulation pump \u003cstrong\u003ePANDA \u003c\/strong\u003eis equipped with a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump capacity to meet the actual needs of the system. \u003c\/p\u003e\n\u003cp\u003eThe pump control panel is placed on top of the engine, making it easier for the user to operate. Its dial displays the current electricity consumption. The pump set includes a set of screw fittings and an adapter for connecting the cable. \u003c\/p\u003e\n\u003cp\u003eThe pump has 4 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e (factory setting) – from the highest to the lowest proportional pressure characteristic curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHS1\/HS2\/HS3\u003c\/strong\u003e – constant speed curves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eThe PANDA series circulation pump is best suited for the following systems:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstant temperature heating system with variable flow\u003c\/li\u003e\n\u003cli\u003eHeating system with variable pipeline temperature\u003c\/li\u003e\n\u003cli\u003eHeating system with night mode\u003c\/li\u003e\n\u003cli\u003eAir conditioning system\u003c\/li\u003e\n\u003cli\u003eIndustrial circulation system\u003c\/li\u003e\n\u003cli\u003eHome central heating system and home hot water system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":49911977935191,"sku":"KAT01164","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PANDA25-40-180.png?v=1739281337"},{"product_id":"panda-25-60-180-pompa-obiegowa-ze-srubunkami","title":"Panda 25-60\/180 circulation pump with screw connections","description":"\u003cp\u003eSeries circulation pump \u003cstrong\u003ePANDA \u003c\/strong\u003eis equipped with a permanent magnet motor and a differential pressure regulator that automatically and continuously adjusts the pump capacity to meet the actual needs of the system. \u003c\/p\u003e\n\u003cp\u003eThe pump control panel is placed on top of the engine, making it easier for the user to operate. Its dial displays the current electricity consumption. The pump set includes a set of screw fittings and an adapter for connecting the cable. \u003c\/p\u003e\n\u003cp\u003eThe pump has 4 operating modes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003c\/strong\u003e (factory setting) – from the highest to the lowest proportional pressure characteristic curve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHS1\/HS2\/HS3\u003c\/strong\u003e – constant speed curves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003eThe PANDA series circulation pump is best suited for the following systems:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstant temperature heating system with variable flow\u003c\/li\u003e\n\u003cli\u003eHeating system with variable pipeline temperature\u003c\/li\u003e\n\u003cli\u003eHeating system with night mode\u003c\/li\u003e\n\u003cli\u003eAir conditioning system\u003c\/li\u003e\n\u003cli\u003eIndustrial circulation system\u003c\/li\u003e\n\u003cli\u003eHome central heating system and home hot water system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":49911978033495,"sku":"KAT01165","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PANDA25-60-180.png?v=1739281278"},{"product_id":"ebo-15-15-pompa-cyrkulacyjna-c-w-u","title":"EBO 15-15 (2-9 W, 230 V) domestic hot water circulation pump.","description":"\u003csection\u003e\n\u003ch2\u003eQuick reply\u003c\/h2\u003e\n\u003cp\u003eThe EBO 15-15 IBO circulation pump for domestic water is an energy-saving device designed for continuous circulation of hot domestic water in home and utility installations, ensuring high comfort of using hot water and very low energy consumption thanks to the use of a permanent magnet motor and electronic operation regulation.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFor whom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor owners of single-family houses who want to have immediate access to hot water at consumption points and reduce water losses while waiting for it to be heated.\u003c\/li\u003e\n\u003cli\u003eFor installers and service companies looking for a compact, easy-to-install circulation pump for modernization and new hot water installations.\u003c\/li\u003e\n\u003cli\u003eFor managers of multi-family buildings and service facilities who care about stable circulation parameters and low noise level of the entire system.\u003c\/li\u003e\n\u003cli\u003eFor users who pay attention to energy consumption and want to use a pump with very low power consumption, up to 2 W depending on the installation.\u003c\/li\u003e\n\u003cli\u003eFor people who value failure-free and safe operation of devices and require a pump designed only for domestic water and in compliance with current EU standards and directives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCirculation of domestic hot water in home plumbing to reduce waiting times for hot water in taps and showers.\u003c\/li\u003e\n\u003cli\u003eWork in hot water installations in multi-family and commercial buildings, where constant circulation is required while maintaining a low noise level.\u003c\/li\u003e\n\u003cli\u003eCooperation with hot water tanks and heating systems that require circulation of domestic water in a specific temperature range.\u003c\/li\u003e\n\u003cli\u003eModernization of existing circulation systems where it is necessary to reduce energy consumption and improve comfort of use.\u003c\/li\u003e\n\u003cli\u003eInstallation applications where it is required to maintain permissible pressure up to 1.0 MPa and water temperature from 2°C to 90°C with IP44 protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe EBO 15-15 IBO circulation pump for hot utility water is ideal for modern home and building installations, ensuring constant circulation of hot water with low energy consumption.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFeatures, description and technical data\u003c\/h2\u003e\n\u003cp\u003eThe EBO 15-15 IBO circulation pump for utility water is a compact device designed for circulating utility water in installations with a maximum working pressure of 1.0 MPa, equipped with a permanent magnet motor and electronic speed control, which allows for high energy efficiency with an engine power of 2-9 W and energy consumption up to 9 W.\u003c\/p\u003e\n\u003cp\u003eThe pump body is designed for installation on a straight section of the pipeline, between two cut-off valves, with the mandatory maintenance of the horizontal position of the shaft and compliance of the flow direction with the marking on the body, and the built-in control panel allows for a smooth change of capacity in the range of up to 12 l\/min and the selection of the economy mode that automatically adjusts the operating speed to the installation requirements.\u003c\/p\u003e\n\u003cp\u003eThe range of permissible operating conditions includes ambient temperature from 0°C to 40°C, relative humidity up to 95%, pumped water temperature from 2°C to 90°C and protection class IP44, while the minimum suction pressure should be at least 2 m water column to avoid cavitation and damage to the bearings.\u003c\/p\u003e\n\u003cp\u003eThe EBO 15-15 pump is characterized by a maximum lifting height of 1.2 m, a spacing of nozzles of 72 mm and a low noise level of approximately 43 dB(A), and the use of a rotor with a permanent magnet allows for a significant reduction in energy consumption compared to traditional circulation pumps, which translates into operational savings in typical installations.\u003c\/p\u003e\n\u003cp\u003eThe device requires connection to a 230 V @ 50 Hz network with mandatory grounding and the use of an external switch with a minimum gap between the contacts of 3 mm, and the manufacturer recommends installing ball valves on both sides of the pump to facilitate service and periodic maintenance of the impeller.\u003c\/p\u003e\n\u003cp\u003eThe EBO 15-15 IBO circulation pump for domestic water has been designed in accordance with the applicable LVD, EMC, RoHS, MD and ErP directives and the relevant harmonized standards, as confirmed by the EU declaration of conformity, and its correct operation requires compliance with the instructions in the user manual, including the prohibition of dry running and the use of the device only for domestic water.\u003c\/p\u003e\n\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates – ensures high quality of workmanship and service support for the EBO 15-15 IBO circulation pump.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch4 id=\"ebo-15-15-zastosowanie\"\u003eWhat is the EBO 15-15 IBO circulation pump intended for?\u003c\/h4\u003e\n\u003cp\u003eThe EBO 15-15 IBO circulation pump is intended for circulation of hot utility water in home and building installations, exclusively for utility water in the temperature range from 2°C to 90°C.\u003c\/p\u003e\n\u003ch4 id=\"ebo-15-15-instalacja\"\u003eHow to properly install the EBO 15-15 IBO pump?\u003c\/h4\u003e\n\u003cp\u003eThe pump should be installed inside the building on a straight section of the pipeline, between two shut-off valves, with a horizontal shaft and the flow direction in accordance with the arrow on the body, after flushing the installation and venting it.\u003c\/p\u003e\n\u003ch4 id=\"ebo-15-15-ustawienia\"\u003eHow to regulate the operating mode and efficiency of the EBO 15-15 IBO pump?\u003c\/h4\u003e\n\u003cp\u003eOperation is regulated using a knob on the control unit, which allows you to increase or decrease the flow in the range marked on a scale from 1 to 6, and you can additionally turn on the economy mode, which automatically adjusts the rotational speed to the current needs of the installation.\u003c\/p\u003e\n\u003ch4 id=\"ebo-15-15-konserwacja\"\u003eHow to care for the pump and clean the impeller?\u003c\/h4\u003e\n\u003cp\u003eMust be disconnected before maintenance Power supply, close the valves and, if necessary, lower the water temperature below 30°C, and if the impeller is blocked by scale deposits, it is necessary to dismantle it and clean the body in accordance with the instructions, which allows the device to function properly again.\u003c\/p\u003e\n\u003ch4 id=\"ebo-15-15-bezpieczenstwo\"\u003eWhat are the most important safety rules when operating the EBO 15-15 IBO pump?\u003c\/h4\u003e\n\u003cp\u003eThe pump cannot run dry or pump flammable or explosive liquids, the installation must be carried out in accordance with local regulations and equipped with efficient grounding and a residual current circuit breaker, and in the event of incorrect operation, it must be immediately disconnected Power supply, close the valves and contact the manufacturer's service.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":52482793734487,"sku":"KAT01740","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/EBO_15-15_1.png?v=1767793464"},{"product_id":"ovi-15-60-130-pompa-obiegowa","title":"OVI 15-60\/130 (5-45 W, 230 V) circulation pump","description":"\u003ch2\u003e🧠 Quick response\u003c\/h2\u003e\n\u003cp\u003eThe OVI series circulation pump is a modern, electronically controlled circulation pump for central heating and air conditioning installations, equipped with a permanent magnet motor and a differential pressure regulator that automatically adjusts the performance to the current needs of the system. The device ensures quiet operation, high energy efficiency and convenient operation thanks to the control panel that facilitates, among others, bleeding the device.\u003c\/p\u003e\n\u003ch2\u003e👤 For whom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstallers of central heating systems in single-family houses - gain stable water circulation in boiler installations and easy selection of parameters thanks to automatic regulation of the pressure difference.\u003c\/li\u003e\n\u003cli\u003eHome owners with modern boilers and automation receive an energy-saving OVI circulation pump that reduces electricity consumption thanks to operation adapted to current demand.\u003c\/li\u003e\n\u003cli\u003eUsers of underfloor and radiator heating systems - benefit from smooth regulation and stable flow parameters in installations with variable flow and variable pipeline temperature.\u003c\/li\u003e\n\u003cli\u003eDesigners and service technicians of air-conditioning and industrial installations - can use the OVI circulation pump in air-conditioning systems and industrial circuits where reliable water circulation is required.\u003c\/li\u003e\n\u003cli\u003eInstallation companies implementing modern central heating installations gain a universal circulation pump compatible with typical spacing and connections in central heating installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e⚙️ Application\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstant-temperature heating systems with variable flow, in which the OVI pump maintains the required water circulation with changing heat demand in the installation.\u003c\/li\u003e\n\u003cli\u003eHeating systems with variable pipeline temperature, e.g. installations with weather automation, where the system requires a pump that automatically adjusts the capacity to current conditions.\u003c\/li\u003e\n\u003cli\u003eHeating systems with night mode in which the operation of the OVI circulation pump can be reduced during periods of lower heat demand to save energy.\u003c\/li\u003e\n\u003cli\u003eAir conditioning systems and industrial circuits requiring forced circulation of water or solutions in closed installations.\u003c\/li\u003e\n\u003cli\u003eHome central heating installations, including systems with radiators and underfloor heating, where circulation pumps are standard in heating water circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe OVI circulation pump will work well in typical central heating and hot water installations in single-family buildings.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Features, description and technical data\u003c\/h2\u003e\n\u003cp\u003eThe OVI series are electronic circulation pumps intended mainly for circulating water in central heating boiler systems in home installations and small and medium-sized heating installations. These devices meet the requirements of modern low-temperature and high-temperature installations, which require reliable circulation of the heating medium.\u003c\/p\u003e\n\u003cp\u003eThe OVI series circulation pump is equipped with a permanent magnet motor and an electronic differential pressure regulator, which automatically and constantly adjusts the rotational speed and pump capacity to the current system demand. This solution improves energy efficiency and comfort of use because the pump does not operate unnecessarily at the highest speed and the installation maintains stable flow parameters.\u003c\/p\u003e\n\u003cp\u003eThe control panel located on the side wall of the engine facilitates the operation of the OVI pump, including changing operating modes and bleeding the device during start-up or service. Intuitive buttons and clear mode markings allow you to quickly adjust the pump's operating characteristics to the specific installation, e.g. operation at constant or proportional pressure.\u003c\/p\u003e\n\u003cp\u003eThe OVI circulation pump retains the construction typical of this class of devices: a glandless cast iron body with threaded connection stubs, a ceramic shaft with radial bearings and structural elements adapted to work with heating water in a wide temperature range, usually from approximately +2 to +110 degrees C. The standard installation spacing of 130-180 mm and threaded connections enable easy installation in typical home central heating installations.\u003c\/p\u003e\n\u003cp\u003eThe motor of circulation pumps of this class is powered by a single-phase 1×230–240 V, 50 Hz network, and the operating parameters are selected for a lifting height of up to approx. 6 m of water column and a maximum efficiency of several cubic meters per hour, which is standard for the 25-60\/180 models used in single-family buildings. The IP44 housing protection level and maximum operating pressure up to 10 bar allow safe operation in typical heating and district heating systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Detailed catalog data for a specific OVI pump model (power, operating curves, exact dimensions, weight) should be downloaded from a dedicated product card and manufacturer's documentation. Content developed on the basis of general data for electronic circulation pumps for central heating. Contact us for details.\u003c\/p\u003e\n\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e\n\u003ch2\u003e❓ FAQ\u003c\/h2\u003e\n\u003ch4 id=\"pompa-ovi-dostepnosc-gdzie-kupic\"\u003eWhere can you buy an OVI series circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI series circulation pump is available for sale online in heating technology stores and in installation wholesale chains specializing in fittings and accessories for central heating installations.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zakup-online-stacjonarnie\"\u003eCan the OVI pump be purchased both online and in stores?\u003c\/h4\u003e\n\u003cp\u003eYes, OVI circulation pumps are usually available both in online stores and in stationary installation wholesalers, which facilitates quick purchase, collection and possible replacement of the device.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zastosowanie-co\"\u003eWhat installations is the OVI pump best suited for?\u003c\/h4\u003e\n\u003cp\u003eThe OVI circulation pump is intended primarily for central heating installations in residential buildings, but it can also work in hot water systems, air conditioning and industrial circuits in which the working medium is water.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-tryby-pracy\"\u003eWhat operating modes does the OVI circulation pump offer?\u003c\/h4\u003e\n\u003cp\u003eModern electronic circulation pumps of this class offer automatic regulation modes (e.g. AUTO with proportional pressure) as well as constant pressure and constant speed modes, which makes it easier to adjust the operation to the specificity of the installation.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-instalacja-montaz\"\u003eHow to properly install the OVI circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI pump should be installed on a straight section of the pipeline with the shaft arranged horizontally, in a place that allows easy access to the control panel and venting; it is also necessary to properly vent the installation and check the flow direction before starting.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-konserwacja-serwis\"\u003eWhat is the maintenance and service of the OVI pump?\u003c\/h4\u003e\n\u003cp\u003ePump maintenance consists mainly of periodically checking the correct operation of the installation, bleeding the system and checking for tightness; modern circulation pumps with an electronic motor do not require typical bearing maintenance, and any service is performed by an authorized service point.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-gwarancja\"\u003eWhat is the warranty period for the OVI pump?\u003c\/h4\u003e\n\u003cp\u003eFor IBO brand pumps, the standard warranty period is 24 months; in the case of the OVI series, an analogous, two-year protection period should be assumed, in accordance with the manufacturer's guidelines and warranty conditions on the product card.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":52721515397463,"sku":"KAT01767","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/OVI_15-60-130_1.png?v=1770367387"},{"product_id":"ovi-25-40-130-pompa-obiegowa","title":"OVI 25-40\/130 (5-22 W, 230 V) circulation pump","description":"\u003ch2\u003e🧠 Quick response\u003c\/h2\u003e\n\u003cp\u003eThe OVI series circulation pump is a modern, electronically controlled circulation pump for central heating and air conditioning installations, equipped with a permanent magnet motor and a differential pressure regulator that automatically adjusts the performance to the current needs of the system. The device ensures quiet operation, high energy efficiency and convenient operation thanks to the control panel that facilitates, among others, bleeding the device.\u003c\/p\u003e\n\u003ch2\u003e👤 For whom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstallers of central heating systems in single-family houses - gain stable water circulation in boiler installations and easy selection of parameters thanks to automatic regulation of the pressure difference.\u003c\/li\u003e\n\u003cli\u003eHome owners with modern boilers and automation receive an energy-saving OVI circulation pump that reduces electricity consumption thanks to operation adapted to current demand.\u003c\/li\u003e\n\u003cli\u003eUsers of underfloor and radiator heating systems - benefit from smooth regulation and stable flow parameters in installations with variable flow and variable pipeline temperature.\u003c\/li\u003e\n\u003cli\u003eDesigners and service technicians of air-conditioning and industrial installations - can use the OVI circulation pump in air-conditioning systems and industrial circuits where reliable water circulation is required.\u003c\/li\u003e\n\u003cli\u003eInstallation companies implementing modern central heating installations gain a universal circulation pump compatible with typical spacing and connections in central heating installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e⚙️ Application\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstant-temperature heating systems with variable flow, in which the OVI pump maintains the required water circulation with changing heat demand in the installation.\u003c\/li\u003e\n\u003cli\u003eHeating systems with variable pipeline temperature, e.g. installations with weather automation, where the system requires a pump that automatically adjusts the capacity to current conditions.\u003c\/li\u003e\n\u003cli\u003eHeating systems with night mode in which the operation of the OVI circulation pump can be reduced during periods of lower heat demand to save energy.\u003c\/li\u003e\n\u003cli\u003eAir conditioning systems and industrial circuits requiring forced circulation of water or solutions in closed installations.\u003c\/li\u003e\n\u003cli\u003eHome central heating installations, including systems with radiators and underfloor heating, where circulation pumps are standard in heating water circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe OVI circulation pump will work well in typical central heating and hot water installations in single-family buildings.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Features, description and technical data\u003c\/h2\u003e\n\u003cp\u003eThe OVI series are electronic circulation pumps intended mainly for circulating water in central heating boiler systems in home installations and small and medium-sized heating installations. These devices meet the requirements of modern low-temperature and high-temperature installations, which require reliable circulation of the heating medium.\u003c\/p\u003e\n\u003cp\u003eThe OVI series circulation pump is equipped with a permanent magnet motor and an electronic differential pressure regulator, which automatically and constantly adjusts the rotational speed and pump capacity to the current system demand. This solution improves energy efficiency and comfort of use because the pump does not operate unnecessarily at the highest speed and the installation maintains stable flow parameters.\u003c\/p\u003e\n\u003cp\u003eThe control panel located on the side wall of the engine facilitates the operation of the OVI pump, including changing operating modes and bleeding the device during start-up or service. Intuitive buttons and clear mode markings allow you to quickly adjust the pump's operating characteristics to the specific installation, e.g. operation at constant or proportional pressure.\u003c\/p\u003e\n\u003cp\u003eThe OVI circulation pump retains the construction typical of this class of devices: a glandless cast iron body with threaded connection stubs, a ceramic shaft with radial bearings and structural elements adapted to work with heating water in a wide temperature range, usually from approximately +2 to +110 degrees C. The standard installation spacing of 130-180 mm and threaded connections enable easy installation in typical home central heating installations.\u003c\/p\u003e\n\u003cp\u003eThe motor of circulation pumps of this class is powered by a single-phase 1×230–240 V, 50 Hz network, and the operating parameters are selected for a lifting height of up to approx. 6 m of water column and a maximum efficiency of several cubic meters per hour, which is standard for the 25-60\/180 models used in single-family buildings. The IP44 housing protection level and maximum operating pressure up to 10 bar allow safe operation in typical heating and district heating systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Detailed catalog data for a specific OVI pump model (power, operating curves, exact dimensions, weight) should be downloaded from a dedicated product card and manufacturer's documentation. Content developed on the basis of general data for electronic circulation pumps for central heating. Contact us for details.\u003c\/p\u003e\n\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e\n\u003ch2\u003e❓ FAQ\u003c\/h2\u003e\n\u003ch4 id=\"pompa-ovi-dostepnosc-gdzie-kupic\"\u003eWhere can you buy an OVI series circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI series circulation pump is available for sale online in heating technology stores and in installation wholesale chains specializing in fittings and accessories for central heating installations.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zakup-online-stacjonarnie\"\u003eCan the OVI pump be purchased both online and in stores?\u003c\/h4\u003e\n\u003cp\u003eYes, OVI circulation pumps are usually available both in online stores and in stationary installation wholesalers, which facilitates quick purchase, collection and possible replacement of the device.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zastosowanie-co\"\u003eWhat installations is the OVI pump best suited for?\u003c\/h4\u003e\n\u003cp\u003eThe OVI circulation pump is intended primarily for central heating installations in residential buildings, but it can also work in hot water systems, air conditioning and industrial circuits in which the working medium is water.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-tryby-pracy\"\u003eWhat operating modes does the OVI circulation pump offer?\u003c\/h4\u003e\n\u003cp\u003eModern electronic circulation pumps of this class offer automatic regulation modes (e.g. AUTO with proportional pressure) as well as constant pressure and constant speed modes, which makes it easier to adjust the operation to the specificity of the installation.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-instalacja-montaz\"\u003eHow to properly install the OVI circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI pump should be installed on a straight section of the pipeline with the shaft arranged horizontally, in a place that allows easy access to the control panel and venting; it is also necessary to properly vent the installation and check the flow direction before starting.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-konserwacja-serwis\"\u003eWhat is the maintenance and service of the OVI pump?\u003c\/h4\u003e\n\u003cp\u003ePump maintenance consists mainly of periodically checking the correct operation of the installation, bleeding the system and checking for tightness; modern circulation pumps with an electronic motor do not require typical bearing maintenance, and any service is performed by an authorized service point.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-gwarancja\"\u003eWhat is the warranty period for the OVI pump?\u003c\/h4\u003e\n\u003cp\u003eFor IBO brand pumps, the standard warranty period is 24 months; in the case of the OVI series, an analogous, two-year protection period should be assumed, in accordance with the manufacturer's guidelines and warranty conditions on the product card.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":52721515462999,"sku":"KAT01771","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/OVI_25-40-130_1.png?v=1770367365"},{"product_id":"ovi-25-60-180-pompa-obiegowa","title":"OVI 25-60\/180 (5-45 W, 230 V) circulation pump","description":"\u003ch2\u003e🧠 Quick response\u003c\/h2\u003e\n\u003cp\u003eThe OVI series circulation pump is a modern, electronically controlled circulation pump for central heating and air conditioning installations, equipped with a permanent magnet motor and a differential pressure regulator that automatically adjusts the performance to the current needs of the system. The device ensures quiet operation, high energy efficiency and convenient operation thanks to the control panel that facilitates, among others, bleeding the device.\u003c\/p\u003e\n\u003ch2\u003e👤 For whom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstallers of central heating systems in single-family houses - gain stable water circulation in boiler installations and easy selection of parameters thanks to automatic regulation of the pressure difference.\u003c\/li\u003e\n\u003cli\u003eHome owners with modern boilers and automation receive an energy-saving OVI circulation pump that reduces electricity consumption thanks to operation adapted to current demand.\u003c\/li\u003e\n\u003cli\u003eUsers of underfloor and radiator heating systems - benefit from smooth regulation and stable flow parameters in installations with variable flow and variable pipeline temperature.\u003c\/li\u003e\n\u003cli\u003eDesigners and service technicians of air-conditioning and industrial installations - can use the OVI circulation pump in air-conditioning systems and industrial circuits where reliable water circulation is required.\u003c\/li\u003e\n\u003cli\u003eInstallation companies implementing modern central heating installations gain a universal circulation pump compatible with typical spacing and connections in central heating installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e⚙️ Application\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstant-temperature heating systems with variable flow, in which the OVI pump maintains the required water circulation with changing heat demand in the installation.\u003c\/li\u003e\n\u003cli\u003eHeating systems with variable pipeline temperature, e.g. installations with weather automation, where the system requires a pump that automatically adjusts the capacity to current conditions.\u003c\/li\u003e\n\u003cli\u003eHeating systems with night mode in which the operation of the OVI circulation pump can be reduced during periods of lower heat demand to save energy.\u003c\/li\u003e\n\u003cli\u003eAir conditioning systems and industrial circuits requiring forced circulation of water or solutions in closed installations.\u003c\/li\u003e\n\u003cli\u003eHome central heating installations, including systems with radiators and underfloor heating, where circulation pumps are standard in heating water circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe OVI circulation pump will work well in typical central heating and hot water installations in single-family buildings.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Features, description and technical data\u003c\/h2\u003e\n\u003cp\u003eThe OVI series are electronic circulation pumps intended mainly for circulating water in central heating boiler systems in home installations and small and medium-sized heating installations. These devices meet the requirements of modern low-temperature and high-temperature installations, which require reliable circulation of the heating medium.\u003c\/p\u003e\n\u003cp\u003eThe OVI series circulation pump is equipped with a permanent magnet motor and an electronic differential pressure regulator, which automatically and constantly adjusts the rotational speed and pump capacity to the current system demand. This solution improves energy efficiency and comfort of use because the pump does not operate unnecessarily at the highest speed and the installation maintains stable flow parameters.\u003c\/p\u003e\n\u003cp\u003eThe control panel located on the side wall of the engine facilitates the operation of the OVI pump, including changing operating modes and bleeding the device during start-up or service. Intuitive buttons and clear mode markings allow you to quickly adjust the pump's operating characteristics to the specific installation, e.g. operation at constant or proportional pressure.\u003c\/p\u003e\n\u003cp\u003eThe OVI circulation pump retains the construction typical of this class of devices: a glandless cast iron body with threaded connection stubs, a ceramic shaft with radial bearings and structural elements adapted to work with heating water in a wide temperature range, usually from approximately +2 to +110 degrees C. The standard installation spacing of 130-180 mm and threaded connections enable easy installation in typical home central heating installations.\u003c\/p\u003e\n\u003cp\u003eThe motor of circulation pumps of this class is powered by a single-phase 1×230–240 V, 50 Hz network, and the operating parameters are selected for a lifting height of up to approx. 6 m of water column and a maximum efficiency of several cubic meters per hour, which is standard for the 25-60\/180 models used in single-family buildings. The IP44 housing protection level and maximum operating pressure up to 10 bar allow safe operation in typical heating and district heating systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Detailed catalog data for a specific OVI pump model (power, operating curves, exact dimensions, weight) should be downloaded from a dedicated product card and manufacturer's documentation. Content developed on the basis of general data for electronic circulation pumps for central heating. Contact us for details.\u003c\/p\u003e\n\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e\n\u003ch2\u003e❓ FAQ\u003c\/h2\u003e\n\u003ch4 id=\"pompa-ovi-dostepnosc-gdzie-kupic\"\u003eWhere can you buy an OVI series circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI series circulation pump is available for sale online in heating technology stores and in installation wholesale chains specializing in fittings and accessories for central heating installations.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zakup-online-stacjonarnie\"\u003eCan the OVI pump be purchased both online and in stores?\u003c\/h4\u003e\n\u003cp\u003eYes, OVI circulation pumps are usually available both in online stores and in stationary installation wholesalers, which facilitates quick purchase, collection and possible replacement of the device.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zastosowanie-co\"\u003eWhat installations is the OVI pump best suited for?\u003c\/h4\u003e\n\u003cp\u003eThe OVI circulation pump is intended primarily for central heating installations in residential buildings, but it can also work in hot water systems, air conditioning and industrial circuits in which the working medium is water.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-tryby-pracy\"\u003eWhat operating modes does the OVI circulation pump offer?\u003c\/h4\u003e\n\u003cp\u003eModern electronic circulation pumps of this class offer automatic regulation modes (e.g. AUTO with proportional pressure) as well as constant pressure and constant speed modes, which makes it easier to adjust the operation to the specificity of the installation.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-instalacja-montaz\"\u003eHow to properly install the OVI circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI pump should be installed on a straight section of the pipeline with the shaft arranged horizontally, in a place that allows easy access to the control panel and venting; it is also necessary to properly vent the installation and check the flow direction before starting.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-konserwacja-serwis\"\u003eWhat is the maintenance and service of the OVI pump?\u003c\/h4\u003e\n\u003cp\u003ePump maintenance consists mainly of periodically checking the correct operation of the installation, bleeding the system and checking for tightness; modern circulation pumps with an electronic motor do not require typical bearing maintenance, and any service is performed by an authorized service point.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-gwarancja\"\u003eWhat is the warranty period for the OVI pump?\u003c\/h4\u003e\n\u003cp\u003eFor IBO brand pumps, the standard warranty period is 24 months; in the case of the OVI series, an analogous, two-year protection period should be assumed, in accordance with the manufacturer's guidelines and warranty conditions on the product card.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":52721568448855,"sku":"KAT01773","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/OVI_25-60-180_1.png?v=1770367348"},{"product_id":"ovi-25-40-180-pompa-obiegowa","title":"OVI 25-40\/180 (5-22 W, 230 V) circulation pump","description":"\u003ch2\u003e🧠 Quick response\u003c\/h2\u003e\n\u003cp\u003eThe OVI series circulation pump is a modern, electronically controlled circulation pump for central heating and air conditioning installations, equipped with a permanent magnet motor and a differential pressure regulator that automatically adjusts the performance to the current needs of the system. The device ensures quiet operation, high energy efficiency and convenient operation thanks to the control panel that facilitates, among others, bleeding the device.\u003c\/p\u003e\n\u003ch2\u003e👤 For whom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstallers of central heating systems in single-family houses - gain stable water circulation in boiler installations and easy selection of parameters thanks to automatic regulation of the pressure difference.\u003c\/li\u003e\n\u003cli\u003eHome owners with modern boilers and automation receive an energy-saving OVI circulation pump that reduces electricity consumption thanks to operation adapted to current demand.\u003c\/li\u003e\n\u003cli\u003eUsers of underfloor and radiator heating systems - benefit from smooth regulation and stable flow parameters in installations with variable flow and variable pipeline temperature.\u003c\/li\u003e\n\u003cli\u003eDesigners and service technicians of air-conditioning and industrial installations - can use the OVI circulation pump in air-conditioning systems and industrial circuits where reliable water circulation is required.\u003c\/li\u003e\n\u003cli\u003eInstallation companies implementing modern central heating installations gain a universal circulation pump compatible with typical spacing and connections in central heating installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e⚙️ Application\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstant-temperature heating systems with variable flow, in which the OVI pump maintains the required water circulation with changing heat demand in the installation.\u003c\/li\u003e\n\u003cli\u003eHeating systems with variable pipeline temperature, e.g. installations with weather automation, where the system requires a pump that automatically adjusts the capacity to current conditions.\u003c\/li\u003e\n\u003cli\u003eHeating systems with night mode in which the operation of the OVI circulation pump can be reduced during periods of lower heat demand to save energy.\u003c\/li\u003e\n\u003cli\u003eAir conditioning systems and industrial circuits requiring forced circulation of water or solutions in closed installations.\u003c\/li\u003e\n\u003cli\u003eHome central heating installations, including systems with radiators and underfloor heating, where circulation pumps are standard in heating water circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe OVI circulation pump will work well in typical central heating and hot water installations in single-family buildings.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Features, description and technical data\u003c\/h2\u003e\n\u003cp\u003eThe OVI series are electronic circulation pumps intended mainly for circulating water in central heating boiler systems in home installations and small and medium-sized heating installations. These devices meet the requirements of modern low-temperature and high-temperature installations, which require reliable circulation of the heating medium.\u003c\/p\u003e\n\u003cp\u003eThe OVI series circulation pump is equipped with a permanent magnet motor and an electronic differential pressure regulator, which automatically and constantly adjusts the rotational speed and pump capacity to the current system demand. This solution improves energy efficiency and comfort of use because the pump does not operate unnecessarily at the highest speed and the installation maintains stable flow parameters.\u003c\/p\u003e\n\u003cp\u003eThe control panel located on the side wall of the engine facilitates the operation of the OVI pump, including changing operating modes and bleeding the device during start-up or service. Intuitive buttons and clear mode markings allow you to quickly adjust the pump's operating characteristics to the specific installation, e.g. operation at constant or proportional pressure.\u003c\/p\u003e\n\u003cp\u003eThe OVI circulation pump retains the construction typical of this class of devices: a glandless cast iron body with threaded connection stubs, a ceramic shaft with radial bearings and structural elements adapted to work with heating water in a wide temperature range, usually from approximately +2 to +110 degrees C. The standard installation spacing of 130-180 mm and threaded connections enable easy installation in typical home central heating installations.\u003c\/p\u003e\n\u003cp\u003eThe motor of circulation pumps of this class is powered by a single-phase 1×230–240 V, 50 Hz network, and the operating parameters are selected for a lifting height of up to approx. 6 m of water column and a maximum efficiency of several cubic meters per hour, which is standard for the 25-60\/180 models used in single-family buildings. The IP44 housing protection level and maximum operating pressure up to 10 bar allow safe operation in typical heating and district heating systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Detailed catalog data for a specific OVI pump model (power, operating curves, exact dimensions, weight) should be downloaded from a dedicated product card and manufacturer's documentation. Content developed on the basis of general data for electronic circulation pumps for central heating. Contact us for details.\u003c\/p\u003e\n\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e\n\u003ch2\u003e❓ FAQ\u003c\/h2\u003e\n\u003ch4 id=\"pompa-ovi-dostepnosc-gdzie-kupic\"\u003eWhere can you buy an OVI series circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI series circulation pump is available for sale online in heating technology stores and in installation wholesale chains specializing in fittings and accessories for central heating installations.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zakup-online-stacjonarnie\"\u003eCan the OVI pump be purchased both online and in stores?\u003c\/h4\u003e\n\u003cp\u003eYes, OVI circulation pumps are usually available both in online stores and in stationary installation wholesalers, which facilitates quick purchase, collection and possible replacement of the device.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zastosowanie-co\"\u003eWhat installations is the OVI pump best suited for?\u003c\/h4\u003e\n\u003cp\u003eThe OVI circulation pump is intended primarily for central heating installations in residential buildings, but it can also work in hot water systems, air conditioning and industrial circuits in which the working medium is water.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-tryby-pracy\"\u003eWhat operating modes does the OVI circulation pump offer?\u003c\/h4\u003e\n\u003cp\u003eModern electronic circulation pumps of this class offer automatic regulation modes (e.g. AUTO with proportional pressure) as well as constant pressure and constant speed modes, which makes it easier to adjust the operation to the specificity of the installation.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-instalacja-montaz\"\u003eHow to properly install the OVI circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI pump should be installed on a straight section of the pipeline with the shaft arranged horizontally, in a place that allows easy access to the control panel and venting; it is also necessary to properly vent the installation and check the flow direction before starting.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-konserwacja-serwis\"\u003eWhat is the maintenance and service of the OVI pump?\u003c\/h4\u003e\n\u003cp\u003ePump maintenance consists mainly of periodically checking the correct operation of the installation, bleeding the system and checking for tightness; modern circulation pumps with an electronic motor do not require typical bearing maintenance, and any service is performed by an authorized service point.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-gwarancja\"\u003eWhat is the warranty period for the OVI pump?\u003c\/h4\u003e\n\u003cp\u003eFor IBO brand pumps, the standard warranty period is 24 months; in the case of the OVI series, an analogous, two-year protection period should be assumed, in accordance with the manufacturer's guidelines and warranty conditions on the product card.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":52752805462359,"sku":"KAT01772","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/OVI_25-40-180_1.png?v=1770622142"},{"product_id":"ovi-25-60-130-pompa-obiegowa","title":"OVI 25-60\/130 (5-45 W, 230 V) circulation pump","description":"\u003ch2\u003e🧠 Quick response\u003c\/h2\u003e\n\u003cp\u003eThe OVI series circulation pump is a modern, electronically controlled circulation pump for central heating and air conditioning installations, equipped with a permanent magnet motor and a differential pressure regulator that automatically adjusts the performance to the current needs of the system. The device ensures quiet operation, high energy efficiency and convenient operation thanks to the control panel that facilitates, among others, bleeding the device.\u003c\/p\u003e\n\u003ch2\u003e👤 For whom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstallers of central heating systems in single-family houses - gain stable water circulation in boiler installations and easy selection of parameters thanks to automatic regulation of the pressure difference.\u003c\/li\u003e\n\u003cli\u003eHome owners with modern boilers and automation receive an energy-saving OVI circulation pump that reduces electricity consumption thanks to operation adapted to current demand.\u003c\/li\u003e\n\u003cli\u003eUsers of underfloor and radiator heating systems - benefit from smooth regulation and stable flow parameters in installations with variable flow and variable pipeline temperature.\u003c\/li\u003e\n\u003cli\u003eDesigners and service technicians of air-conditioning and industrial installations - can use the OVI circulation pump in air-conditioning systems and industrial circuits where reliable water circulation is required.\u003c\/li\u003e\n\u003cli\u003eInstallation companies implementing modern central heating installations gain a universal circulation pump compatible with typical spacing and connections in central heating installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e⚙️ Application\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstant-temperature heating systems with variable flow, in which the OVI pump maintains the required water circulation with changing heat demand in the installation.\u003c\/li\u003e\n\u003cli\u003eHeating systems with variable pipeline temperature, e.g. installations with weather automation, where the system requires a pump that automatically adjusts the capacity to current conditions.\u003c\/li\u003e\n\u003cli\u003eHeating systems with night mode in which the operation of the OVI circulation pump can be reduced during periods of lower heat demand to save energy.\u003c\/li\u003e\n\u003cli\u003eAir conditioning systems and industrial circuits requiring forced circulation of water or solutions in closed installations.\u003c\/li\u003e\n\u003cli\u003eHome central heating installations, including systems with radiators and underfloor heating, where circulation pumps are standard in heating water circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe OVI circulation pump will work well in typical central heating and hot water installations in single-family buildings.\u003c\/p\u003e\n\u003ch2\u003e🛠️ Features, description and technical data\u003c\/h2\u003e\n\u003cp\u003eThe OVI series are electronic circulation pumps intended mainly for circulating water in central heating boiler systems in home installations and small and medium-sized heating installations. These devices meet the requirements of modern low-temperature and high-temperature installations, which require reliable circulation of the heating medium.\u003c\/p\u003e\n\u003cp\u003eThe OVI series circulation pump is equipped with a permanent magnet motor and an electronic differential pressure regulator, which automatically and constantly adjusts the rotational speed and pump capacity to the current system demand. This solution improves energy efficiency and comfort of use because the pump does not operate unnecessarily at the highest speed and the installation maintains stable flow parameters.\u003c\/p\u003e\n\u003cp\u003eThe control panel located on the side wall of the engine facilitates the operation of the OVI pump, including changing operating modes and bleeding the device during start-up or service. Intuitive buttons and clear mode markings allow you to quickly adjust the pump's operating characteristics to the specific installation, e.g. operation at constant or proportional pressure.\u003c\/p\u003e\n\u003cp\u003eThe OVI circulation pump retains the construction typical of this class of devices: a glandless cast iron body with threaded connection stubs, a ceramic shaft with radial bearings and structural elements adapted to work with heating water in a wide temperature range, usually from approximately +2 to +110 degrees C. The standard installation spacing of 130-180 mm and threaded connections enable easy installation in typical home central heating installations.\u003c\/p\u003e\n\u003cp\u003eThe motor of circulation pumps of this class is powered by a single-phase 1×230–240 V, 50 Hz network, and the operating parameters are selected for a lifting height of up to approx. 6 m of water column and a maximum efficiency of several cubic meters per hour, which is standard for the 25-60\/180 models used in single-family buildings. The IP44 housing protection level and maximum operating pressure up to 10 bar allow safe operation in typical heating and district heating systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Detailed catalog data for a specific OVI pump model (power, operating curves, exact dimensions, weight) should be downloaded from a dedicated product card and manufacturer's documentation. Content developed on the basis of general data for electronic circulation pumps for central heating. Contact us for details.\u003c\/p\u003e\n\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e\n\u003ch2\u003e❓ FAQ\u003c\/h2\u003e\n\u003ch4 id=\"pompa-ovi-dostepnosc-gdzie-kupic\"\u003eWhere can you buy an OVI series circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI series circulation pump is available for sale online in heating technology stores and in installation wholesale chains specializing in fittings and accessories for central heating installations.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zakup-online-stacjonarnie\"\u003eCan the OVI pump be purchased both online and in stores?\u003c\/h4\u003e\n\u003cp\u003eYes, OVI circulation pumps are usually available both in online stores and in stationary installation wholesalers, which facilitates quick purchase, collection and possible replacement of the device.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-zastosowanie-co\"\u003eWhat installations is the OVI pump best suited for?\u003c\/h4\u003e\n\u003cp\u003eThe OVI circulation pump is intended primarily for central heating installations in residential buildings, but it can also work in hot water systems, air conditioning and industrial circuits in which the working medium is water.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-tryby-pracy\"\u003eWhat operating modes does the OVI circulation pump offer?\u003c\/h4\u003e\n\u003cp\u003eModern electronic circulation pumps of this class offer automatic regulation modes (e.g. AUTO with proportional pressure) as well as constant pressure and constant speed modes, which makes it easier to adjust the operation to the specificity of the installation.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-instalacja-montaz\"\u003eHow to properly install the OVI circulation pump?\u003c\/h4\u003e\n\u003cp\u003eThe OVI pump should be installed on a straight section of the pipeline with the shaft arranged horizontally, in a place that allows easy access to the control panel and venting; it is also necessary to properly vent the installation and check the flow direction before starting.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-konserwacja-serwis\"\u003eWhat is the maintenance and service of the OVI pump?\u003c\/h4\u003e\n\u003cp\u003ePump maintenance consists mainly of periodically checking the correct operation of the installation, bleeding the system and checking for tightness; modern circulation pumps with an electronic motor do not require typical bearing maintenance, and any service is performed by an authorized service point.\u003c\/p\u003e\n\u003ch4 id=\"pompa-ovi-gwarancja\"\u003eWhat is the warranty period for the OVI pump?\u003c\/h4\u003e\n\u003cp\u003eFor IBO brand pumps, the standard warranty period is 24 months; in the case of the OVI series, an analogous, two-year protection period should be assumed, in accordance with the manufacturer's guidelines and warranty conditions on the product card.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":52752805527895,"sku":"KAT01774","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/OVI_25-60-130_1.png?v=1770622109"},{"product_id":"epro-15-15-plus-pompa-cyrkulacyjna-c-w-u","title":"EPRO 15-15 PLUS (3-9 W, 230 V) domestic hot water circulation pump.","description":"\u003cdiv\u003e\n\u003ch2\u003eEPRO 15-15 PLUS – energy-saving circulation pump for drinking water\u003c\/h2\u003e\n\u003cp\u003eEPRO 15-15 PLUS is a compact, energy-saving circulation pump designed for continuous operation in hot water circuits, dedicated exclusively to drinking water. Discover the possibilities of the brand's circulation pump today IPRO.\u003c\/p\u003e\n\u003ch3\u003eFor whom\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstallers looking for an easy-to-install circulation pump for domestic hot water in small heating systems.\u003c\/li\u003e\n\u003cli\u003eAdministrators of buildings and facilities with a need for constant circulation of drinking water with low energy consumption and low noise levels.\u003c\/li\u003e\n\u003cli\u003eIndividual users modernizing hot water installations who care about high energy efficiency and comfort of using hot water.\u003c\/li\u003e\n\u003cli\u003eService and technical companies that require a device with a clear control panel, time and temperature control function and easy diagnostics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCirculation of hot water in small heating systems, ensuring quick access to hot water at consumption points.\u003c\/li\u003e\n\u003cli\u003eCooperation with ventilation and air-conditioning installations that require stable water circulation.\u003c\/li\u003e\n\u003cli\u003eContinuous operation in drinking water installations in the permissible temperature range of 2–95°C and system pressure up to 1.0 MPa.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures, description and technical data\u003c\/h3\u003e\n\u003cp\u003eThe EPRO 15-15 PLUS pump has been designed for continuous circulation of drinking water, offering easy installation, low energy consumption and high comfort of use thanks to the low noise level of the entire system.\u003c\/p\u003e\n\u003cp\u003eHigh energy efficiency of the pump has been achieved by using a permanent magnet in the motor rotor, which allows operation in the power consumption range of 3-9 W with a capacity of up to 10 l\/min and a lifting height of 1.2 m. The device is designed to be powered by 1×230 V (+6%\/−10%), 50 Hz, has an IP44 protection level, F insulation class and an allowable relative ambient humidity of up to 95%, thanks to which can operate in typical indoor installation conditions.\u003c\/p\u003e\n\u003cp\u003eThe maximum operating pressure in the system is 1 MPa (10 bar), the minimum suction inlet pressure is 2 m water column, and the permissible temperature range of the pumped liquid is from 2°C to 95°C (TF95), with the recommendation that the water temperature be higher than the ambient temperature to avoid condensation. The pump body is equipped with ½\" connection stubs with a spacing of 72 mm, and the design requires the pump to be installed on a straight section of the pipeline, between two shut-off valves, with the motor shaft arranged horizontally and a non-return valve on the discharge side.\u003c\/p\u003e\n\u003cp\u003eThe control panel contains a digital display and a set of diodes and buttons enabling the setting of three operating time periods, switching on and off temperature values, as well as the selection of manual or automatic mode with time and temperature control.\u003c\/p\u003e\n\u003cp\u003eDuring programming, the display shows the sequentially set start and stop time and temperature, while during normal operation it shows the current operating time, temperature and current power consumption, which makes it easier to control the pump's operating parameters. Starting the pump requires prior filling and bleeding of the installation, and in the event of noise during operation, a bleeding procedure is provided by opening and closing the water intake point several times or loosening the union nut until the water flows out of the pump body.\u003c\/p\u003e\n\u003cp\u003eMaintenance includes periodic cleaning of the impeller if it is blocked by mineral deposits (scale), and all servicing should be performed after disconnecting the power supply and at the lowest possible water temperature, preferably below 30°C. The EPRO 15-15 PLUS pump is covered by a 36-month warranty from the date of purchase, provided that the instructions in the manual are followed, and all repairs should be carried out by an authorized service center of the DAMBAT manufacturer.\u003c\/p\u003e\n\u003ch4\u003eTechnical data – EPRO 15-15 PLUS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDevice type: circulation pump for utility water\/drinking water.\u003c\/li\u003e\n\u003cli\u003eApplication: circulation of domestic hot water in small heating systems, ventilation and air conditioning.\u003c\/li\u003e\n\u003cli\u003ePower supply electrical: 1×230 V +6%\/−10%, 50 Hz, PE.\u003c\/li\u003e\n\u003cli\u003ePower consumption: 3-9 W\u003c\/li\u003e\n\u003cli\u003eMotor power: 9W\u003c\/li\u003e\n\u003cli\u003eCapacity: 10 l\/min.\u003c\/li\u003e\n\u003cli\u003eLifting height: 1.2 m.\u003c\/li\u003e\n\u003cli\u003eMaximum system pressure: 1 MPa (10 bar).\u003c\/li\u003e\n\u003cli\u003eMinimum suction inlet pressure: 2 m H₂O.\u003c\/li\u003e\n\u003cli\u003ePermissible ambient temperature: 0–40°C.\u003c\/li\u003e\n\u003cli\u003eTemperature range of the pumped liquid: 2–95°C (TF95).\u003c\/li\u003e\n\u003cli\u003eMaximum ambient relative humidity: ≤ 95%.\u003c\/li\u003e\n\u003cli\u003eDegree of protection: IP44.\u003c\/li\u003e\n\u003cli\u003eInsulation class: F\u003c\/li\u003e\n\u003cli\u003eSound pressure level: \u003c 43 dB(A).\u003c\/li\u003e\n\u003cli\u003eHydraulic connections: ½\".\u003c\/li\u003e\n\u003cli\u003eSpacing of spigots: 72 mm.\u003c\/li\u003e\n\u003cli\u003eContinuous operation, dry operation without water is prohibited.\u003c\/li\u003e\n\u003cli\u003eWarranty: 36 months from the date of purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDambat is a trusted manufacturer of pumps and hydrotechnical equipment, offering products compliant with the European LVD, EMC, RoHS, MD and ErP directives and relevant harmonized standards.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFAQ – EPRO 15-15 PLUS\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhere can I buy the EPRO 15-15 PLUS pump?\u003c\/summary\u003e\n\u003cp\u003eThe EPRO 15-15 PLUS pump is sold with an operating manual and a warranty card from the manufacturer DAMBAT, which provides service details. The pump can be purchased from trusted suppliers and online.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the warranty period for the EPRO 15-15 PLUS pump?\u003c\/summary\u003e\n\u003cp\u003eThe EPRO 15-15 PLUS pump is covered by a 36-month warranty from the date of purchase, provided that you have the original proof of purchase and follow the instructions in the user manual. After the warranty period, Dambat also performs post-warranty repairs, please contact our service center to arrange the details.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat applications is this pump intended for?\u003c\/summary\u003e\n\u003cp\u003eEPRO 15-15 PLUS is intended for continuous circulation of drinking water, in particular for hot water circuits in small heating systems. The pump is not intended to power air conditioning or heating circuits or heat pumps due to its energy-saving efficiency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan the EPRO 15-15 PLUS pump work with a medium other than drinking water?\u003c\/summary\u003e\n\u003cp\u003eThis circulation pump is clearly marked as intended for drinking water only, and any use other than as intended is considered foreseeable misuse of the device. Therefore, it will not be suitable for solutions with glycol.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to properly install the EPRO 15-15 PLUS pump in the installation?\u003c\/summary\u003e\n\u003cp\u003eThe pump should be installed inside the building on a straight section of the pipeline, between two shut-off valves, maintaining the flow direction indicated by the arrow on the body, with a maximum pressure of 1.0 MPa, a non-return valve on the discharge side and the shaft arranged horizontally.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the basic operating parameters of the EPRO 15-15 PLUS pump?\u003c\/summary\u003e\n\u003cp\u003eThe pump operates with a power supply of 1×230 V, 50 Hz, power consumption 3–9 W, lifting height 1.2 m, efficiency 10 l\/min, permissible pressure up to 1 MPa, water temperature range 2–95°C and protection class IP44.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to bleed the EPRO 15-15 PLUS pump if it is noisy?\u003c\/summary\u003e\n\u003cp\u003eIf you hear noises, bleed the installation by opening and closing the water intake tap several times, and if that doesn't help, gently loosen the pump connector nut and open the water inlet until the water flows out of the body, then check the electric cables and tighten the connector again.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to care for the pump – is periodic cleaning required?\u003c\/summary\u003e\n\u003cp\u003eDue to the possibility of scale deposits in the installation, the manufacturer recommends periodic cleaning of the body and impeller in the event of blockage, and all maintenance work should be carried out after disconnecting the power supply and at the lowest possible water temperature, preferably below 30°C.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the operating conditions of the EPRO 15-15 PLUS pump?\u003c\/summary\u003e\n\u003cp\u003eThe permissible ambient temperature is 0-40°C, the maximum relative humidity is 95%, the maximum system pressure is 1.0 MPa, and the minimum inflow pressure at the pump inlet is 2 m water column; the water should be between 2-95°C and warmer than the surroundings to avoid condensation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat to do if the pump fails or does not start?\u003c\/summary\u003e\n\u003cp\u003eIn the event of a failure, first disconnect the pump from the power supply, check the fuse, overcurrent switch and possible blockage of the rotor, and if the problem cannot be removed in accordance with the instructions, turn off the pump, close the cut-off valves and contact the authorized DAMBAT service.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e","brand":"IPRO","offers":[{"title":"Default Title","offer_id":52762555482455,"sku":"KAT02043","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/EPRO_15-15_PLUS-1.png?v=1770723064"}],"url":"https:\/\/dambat.pl\/en\/collections\/free-pump-testers.oembed","provider":"DAMBAT Jastrzębski S.K.A.","version":"1.0","type":"link"}