{"title":"Accessories for surface and hydrophore pumps","description":"\u003ch2\u003eAccessories for surface and hydrophore pumps\u003c\/h2\u003e\n\u003cp\u003eAccessories for surface and hydrophore pumps include devices responsible for controlling the pump operation, securing the system and controlling the pressure in the installation. These are the elements that complement the hydrophore set and determine its reliable, automatic operation.\u003c\/p\u003e\n\n\u003ch3\u003ePump control and automation\u003c\/h3\u003e\n\u003cp\u003ePressure switches and electronic controllers automatically start and stop the pump depending on the pressure and water flow in the installation. Thanks to this, the pump operates only when needed and the pressure in the system is maintained at a constant, set level. Some devices are equipped with a manometer enabling current pressure readings and a signal panel informing about the operating status and possible failure.\u003c\/p\u003e\n\n\u003ch3\u003eSystem protection\u003c\/h3\u003e\n\u003cp\u003eAn important function of the accessories is to protect the pump against dry running, i.e. operation without water, which may damage the device. Built-in protections disconnect Power supply in the event of a lack of medium, and some models also offer a pressure reducer and an automatic start-up test after a long period of inactivity.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation elements\u003c\/h3\u003e\n\u003cp\u003eThe accessories also include anti-vibration connections that dampen vibrations transmitted from the pump to the pipeline. They limit noise, reduce mechanical stress and influence the durability of connections and the entire installation.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eThe equipment is designed to work with surface and hydrophore pumps in clean water installations - in buildings, gardens and irrigation systems. Appropriate selection of controls and protections extends the life of the pump and increases the safety and comfort of use of the entire system.\u003c\/p\u003e","products":[{"product_id":"zbiornik-50-z-manometrem-poziomy","title":"Diaphragm tank 50 HORIZONTALS with pressure gauge","description":"\u003ch2\u003eIBO Diaphragm tank 50 LEVELS with pressure gauge\u003c\/h2\u003e\n\n\u003cp\u003eIBO Diaphragm tank 50 LEVELS with manometer is a pressure device with a capacity of 50 liters, designed to stabilize water pressure and increase the active volume of water supply systems. The carbon steel structure, equipped with an internal EPDM membrane and a clear pressure gauge, ensures precise control over the installation. Proven technology reduces the frequency of pump starts in hydrophore sets, extending the time of their failure-free operation.\u003c\/p\u003e\n\n\u003ch3\u003eFor whom B2B\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation and plumbing companies:\u003c\/strong\u003e integrated pressure gauge and standard Connection 1\" reduce assembly time and facilitate precise adjustment of the initial pressure in the system.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWholesale and technical stores:\u003c\/strong\u003e enriches the warehouse offer in the segment of the construction of hydrophore sets with a ready-to-work, certified pressure device.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWater supply system designers:\u003c\/strong\u003e allows optimization of pump operation (reduction of the number of starting cycles), which improves the energy efficiency of treatment plants and intakes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFarms and enterprises:\u003c\/strong\u003e A solid carbon steel body protected against corrosion guarantees long service life in intensively used water supply networks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eThe tank is used in installations supplying water to single- and multi-family houses, farms and industrial plants. The device is used to store clean water and stabilize the pressure in the network, cooperating with surface and submersible pumps as part of classic hydrophore sets. Thanks to the EPDM rubber diaphragm separating the water from the outer jacket and the compressed air layer, the water does not have direct contact with the metal walls of the vessel.\u003c\/p\u003e\n\n\u003cp\u003eThe horizontal orientation of the tank facilitates its integration in low technical rooms, allowing for stable mounting of the suction pump on it. The device is designed to operate at temperatures from 0°C to 45°C. The car air valve built into the cover allows service technicians to conveniently pump or release air in order to correct the factory initial pressure (1.7 bar) to optimal values for a given hydrophore characteristic.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eEPDM membrane eliminating contact of water with the walls\u003c\/li\u003e\n    \u003cli\u003eHorizontal installation position makes it easier to assemble the set\u003c\/li\u003e\n    \u003cli\u003eBuilt-in pressure gauge for constant pressure control\u003c\/li\u003e\n    \u003cli\u003eCar valve for regulating air pressure hidden under the cover\u003c\/li\u003e\n    \u003cli\u003eThick carbon steel coated with anti-corrosion varnish\u003c\/li\u003e\n    \u003cli\u003eCompliance with the requirements of Directive 2014\/68\/EU\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eDiaphragm: YES\u003c\/li\u003e\n    \u003cli\u003eInstallation Position: Horizontal\u003c\/li\u003e\n    \u003cli\u003eConnection: 1\"\u003c\/li\u003e\n    \u003cli\u003ePressure gauge: YES\u003c\/li\u003e\n    \u003cli\u003eMaximum tested pressure: 12.0 bar\u003c\/li\u003e\n    \u003cli\u003ePre-pressure: 1.7 ±10% bar\u003c\/li\u003e\n    \u003cli\u003eOperating temperature: 0°C to 45°C\u003c\/li\u003e\n    \u003cli\u003eDimensions: 38\/55 cm\u003c\/li\u003e\n    \u003cli\u003eWeight: 9.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eBody: Carbon steel, lacquered\u003c\/li\u003e\n    \u003cli\u003eDiaphragm: EPDM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ IBO Diaphragm tank 50 LEVELS with pressure gauge\u003c\/h3\u003e\n\n\u003ch4 id=\"zbiornik-przeponowy-50-sprzedaz\"\u003eWhere is this product sold?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eWhere is this product sold?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eIBO Diaphragm tank 50 LEVELS with a pressure gauge can be found in industry retail outlets and wholesalers cooperating with the IBO brand.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003ch4 id=\"zbiornik-przeponowy-50-powietrze\"\u003eHow is the air pressure in the tank regulated?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eHow is the air pressure in the tank regulated?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eAdjustment is made through a special air valve, identical to that in car wheels, located in the rear part of the tank and protected by a cover.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003ch4 id=\"zbiornik-przeponowy-50-manometr\"\u003eDoes this device come standard with a measuring element?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eDoes this device come standard with a measuring element?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eYes, this model is equipped with a pressure gauge enabling current reading of the pressure in the hydrophore system.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003ch4 id=\"zbiornik-przeponowy-50-gwarancja\"\u003eWhat is the warranty and service of this device?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eWhat is the warranty and service of this device?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eThe warranty is 24 months. The only authorized one \u003ca href=\"https:\/\/dambat.pl\/pages\/serwis\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eservice\u003c\/a\u003e is run by Dambat.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eDambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Gdzie prowadzona jest sprzedaż tego produktu?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBO Zbiornik przeponowy 50 POZIOMY z manometrem znajdziesz w branżowych punktach handlowych i w hurtowniach współpracujących z marką IBO.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Jak reguluje się ciśnienie powietrza w zbiorniku?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Regulacji dokonuje się poprzez specjalny wentyl powietrzny, identyczny jak w kołach samochodowych, zlokalizowany w tylnej części zbiornika i zabezpieczony pokrywą.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Czy to urządzenie jest standardowo wyposażone w element pomiarowy?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Tak, ten model jest wyposażony w manometr umożliwiający bieżący odczyt ciśnienia w instalacji hydroforowej.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Jak wygląda gwarancja i serwis tego urządzenia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Gwarancja wynosi 24 miesiące. Jedyny autoryzowany \u003ca href=\\\"https:\/\/dambat.pl\/pages\/serwis\\\" target=\\\"_blank\\\" rel=\\\"noopener noreferrer\\\"\u003eserwis\u003c\/a\u003e prowadzi firma Dambat.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466030764375,"sku":"001491","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_100_z_manometrem.png?v=1724334406"},{"product_id":"zbiornik-100l-z-manometrem-poziomy","title":"100 horizontal diaphragm tank with a pressure gauge","description":"\u003ch2\u003eIBO 100 horizontal diaphragm tank with a pressure gauge\u003c\/h2\u003e\n\n\u003cp\u003eIBO 100 horizontal diaphragm tank with a pressure gauge is a steel pressure vessel designed for storing water and optimizing the pressure in the water supply network. The horizontal structure facilitates installation in pressure booster sets, and the thick-walled body protected with an anti-corrosion coating ensures resistance to difficult operating conditions. The built-in EPDM rubber diaphragm effectively isolates the pumped medium from the metal walls, which significantly extends the period of failure-free operation of the entire power system.\u003c\/p\u003e\n\n\u003ch3\u003eFor whom B2B\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation and plumbing companies:\u003c\/strong\u003e integrated pressure gauge and standard Connection 1” reduce the installation time of the hydrophore set and allow for quick calibration of the system.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWholesale and technical stores:\u003c\/strong\u003e supplements the range in the area of pump technology with a ready-to-install product that meets the guidelines of the Pressure Equipment Directive 2014\/68\/EU.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWater system designers:\u003c\/strong\u003e large capacity and increased working pressure significantly reduce the frequency of pump activation, which protects electric motors against premature wear.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFarms and enterprises:\u003c\/strong\u003e a solid carbon steel body and a horizontal arrangement allow for trouble-free adaptation of the vessel in company pumping stations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eThe tank operates in installations supplying single- and multi-family buildings, as well as meeting the water needs of farms and enterprises. In combination with appropriately selected surface or submersible pumps, the device creates an efficient hydrophore set that stabilizes the pipeline in case of local fluctuations in consumption from its own intakes. The tank can operate with water with a maximum operating temperature of 45°C.\u003c\/p\u003e\n\n\u003cp\u003eThe layer of compressed air placed between the diaphragm and the steel casing is responsible for releasing the water accumulated inside the flexible membrane. In order to maintain or change the factory pre-pressure (1.7 bar), the device is equipped with an easily accessible valve - analogous to those used in car tires - hidden in the rear part of the structure under the masking layer. This solution makes it easier for service technicians to perform ongoing control using a standard compressor.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eEPDM membrane eliminating contact of water with the walls\u003c\/li\u003e\n    \u003cli\u003eHorizontal installation position makes it easier to assemble the set\u003c\/li\u003e\n    \u003cli\u003eBuilt-in pressure gauge for constant pressure control\u003c\/li\u003e\n    \u003cli\u003eCar valve for regulating air pressure hidden under the cover\u003c\/li\u003e\n    \u003cli\u003eThick carbon steel coated with anti-corrosion varnish\u003c\/li\u003e\n    \u003cli\u003eCompliance with the requirements of Directive 2014\/68\/EU\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eDiaphragm: YES\u003c\/li\u003e\n    \u003cli\u003eInstallation Position: Horizontal\u003c\/li\u003e\n    \u003cli\u003eConnection: 1\"\u003c\/li\u003e\n    \u003cli\u003ePressure gauge: YES\u003c\/li\u003e\n    \u003cli\u003eMaximum tested pressure: 12.0 bar\u003c\/li\u003e\n    \u003cli\u003ePre-pressure: 1.7 ±10% bar\u003c\/li\u003e\n    \u003cli\u003eOperating temperature: 0°C to 45°C\u003c\/li\u003e\n    \u003cli\u003eDimensions [D\/H]: 470\/710 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eBody: Carbon steel, lacquered\u003c\/li\u003e\n    \u003cli\u003eDiaphragm: EPDM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ IBO Diaphragm tank 100 horizontal\u003c\/h3\u003e\n\n\u003ch4 id=\"zbiornik-100-poziomy-sprzedaz\"\u003eWhere is this product sold?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eWhere is this product sold?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eIBO 100 horizontal diaphragm tank with a pressure gauge can be found in industry retail outlets and wholesalers cooperating with the IBO brand.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003ch4 id=\"zbiornik-100-poziomy-temperatura\"\u003eWhat is the maximum operating temperature for this tank?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eWhat is the maximum operating temperature for this tank?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eThe device is designed to operate at operating temperatures ranging from 0°C to 45°C.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003ch4 id=\"zbiornik-100-poziomy-cisnienie\"\u003eHow is compressed air pressure regulated?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eHow is compressed air pressure regulated?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eIn the rear part of the housing, under the grille, there is a special valve (identical to the one in a car), which is used to pump or release air.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003ch4 id=\"zbiornik-100-poziomy-gwarancja\"\u003eWhat is the warranty and service of this device?\u003c\/h4\u003e\n\u003cdetails style=\"margin-bottom: 1rem; border: 1px solid #d1d1d1; border-radius: 4px; overflow: hidden;\"\u003e\n    \u003csummary style=\"cursor: pointer; font-weight: 600; padding: 12px 15px; background: #fcfcfc; list-style: none; display: flex; justify-content: space-between; align-items: center;\"\u003e\n        \u003cspan\u003eWhat is the warranty and service of this device?\u003c\/span\u003e\n        \u003cspan style=\"font-size: 16px; color: #666; font-weight: bold;\"\u003e+\u003c\/span\u003e\n    \u003c\/summary\u003e\n    \u003cdiv style=\"padding: 15px; border-top: 1px solid #d1d1d1; background: #ffffff; line-height: 1.6;\"\u003e\n        \u003cp\u003eThe warranty is 24 months. The only authorized one \u003ca href=\"https:\/\/dambat.pl\/pages\/serwis\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eservice\u003c\/a\u003e is run by Dambat.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eDambat is a trusted Polish manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Gdzie prowadzona jest sprzedaż tego produktu?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBO Zbiornik przeponowy 100 poziomy z manometrem znajdziesz w branżowych punktach handlowych i w hurtowniach współpracujących z marką IBO.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Jaka jest maksymalna temperatura robocza dla tego zbiornika?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Urządzenie przystosowane jest do pracy w temperaturach roboczych mieszczących się w przedziale od 0°C do 45°C.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"W jaki sposób reguluje się ciśnienie sprężonego powietrza?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"W tylnej części obudowy, pod maskownicą, zlokalizowany jest specjalny wentyl (identyczny z samochodowym), który służy do dopompowania lub upuszczania powietrza.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Jak wygląda gwarancja i serwis tego urządzenia?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Gwarancja wynosi 24 miesiące. Jedyny autoryzowany \u003ca href=\\\"https:\/\/dambat.pl\/pages\/serwis\\\" target=\\\"_blank\\\" rel=\\\"noopener noreferrer\\\"\u003eserwis\u003c\/a\u003e prowadzi firma Dambat.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466061107543,"sku":"001498","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_100_z_manometrem.png?v=1724334406"},{"product_id":"zbiornik-100-poziomy","title":"100 horizontal diaphragm tank","description":"\u003cp\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. Inside the tanks there are EPDM rubber diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, type 50 and type 100 tank models are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to the one in car wheels, located at the back of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466135392599,"sku":"Z100","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_80.png?v=1724334406"},{"product_id":"zbiornik-100-pion-poz-z-manometrem","title":"Diaphragm tank 100 VERTICAL\/HORIZONTAL with a pressure gauge","description":"\u003cp data-mce-fragment=\"1\"\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. There are EPDM rubber diaphragms inside the tanks, creating a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, tank models type 50 and 100 are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to that in car wheels, located at the rear of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466135458135,"sku":"Z1002","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_pion-poziom_150_z_manometrem.png?v=1724334282"},{"product_id":"zbiornik-24-poziomy","title":"24-level expansion tank","description":"\u003cp\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. Inside the tanks there are EPDM rubber diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, type 50 and type 100 tank models are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to the one in car wheels, located at the back of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466135490903,"sku":"Z24","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_80.png?v=1724334406"},{"product_id":"zbiornik-inox-24-poziomy","title":"24 INOX horizontal diaphragm tank","description":"\u003cp\u003eHorizontal expansion tanks, made of stainless steel AISI 304 type 24-100, used for storing water in water supply systems. The jacket and flange of the tank are made of stainless steel. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. Made of stainless steel, the tank can be installed in wells and wet rooms without the risk of accelerated corrosion. Inside the tanks there are rubber EPDM diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, tank models type 50 and 100 are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to that in car wheels, located at the rear of the tank, under the cover.\u003c\/p\u003e\n\u003cp\u003eIBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466135523671,"sku":"Z241","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_INOX.png?v=1724333969"},{"product_id":"zbiornik-50-poziomy","title":"50 horizontal diaphragm tank","description":"\u003cp\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. Inside the tanks there are EPDM rubber diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, type 50 and type 100 tank models are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to the one in car wheels, located at the back of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466135785815,"sku":"Z50","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_80.png?v=1724334406"},{"product_id":"zbiornik-inox-50-poziomy","title":"50 INOX horizontal diaphragm tank","description":"\u003cp\u003eHorizontal expansion tanks, made of stainless steel AISI 304 type 24-100, used for storing water in water supply systems. The jacket and flange of the tank are made of stainless steel. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. Made of stainless steel, the tank can be installed in wells and wet rooms without the risk of accelerated corrosion. Inside the tanks there are rubber EPDM diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, tank models type 50 and 100 are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to that in car wheels, located at the rear of the tank, under the cover.\u003c\/p\u003e\n\u003cp\u003eIBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466135818583,"sku":"Z501","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_INOX.png?v=1724333969"},{"product_id":"zbiornik-50-pion-poziom-z-manometrem","title":"Diaphragm tank 50 VERTICAL\/HORIZONTAL with a pressure gauge","description":"\u003cp\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. There are EPDM rubber diaphragms inside the tanks, creating a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, tank models type 50 and 100 are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to that in car wheels, located at the rear of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466135851351,"sku":"Z502","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_pion-poziom_150_z_manometrem.png?v=1724334282"},{"product_id":"zbiornik-80-poziomy","title":"80 horizontal diaphragm tank","description":"\u003cp data-mce-fragment=\"1\"\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. Inside the tanks there are EPDM rubber diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, type 50 and type 100 tank models are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to the one in car wheels, located at the back of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466136080727,"sku":"Z80","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_80.png?v=1724334406"},{"product_id":"zbiornik-inox-80-poziomy","title":"80 INOX horizontal diaphragm tank","description":"\u003cp data-mce-fragment=\"1\"\u003eHorizontal expansion tanks, made of stainless steel AISI 304 type 24-100, used for storing water in water supply systems. The jacket and flange of the tank are made of stainless steel. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. Made of stainless steel, the tank can be installed in wells and wet rooms without the risk of accelerated corrosion. Inside the tanks there are rubber EPDM diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, tank models type 50 and 100 are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to that in car wheels, located at the rear of the tank, under the cover.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466136310103,"sku":"Z801","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_INOX.png?v=1724333969"},{"product_id":"zbiornik-80-pion-poziom-z-manometrem","title":"Diaphragm tank 80 VERTICAL\/HORIZONTAL with a pressure gauge","description":"\u003cp data-mce-fragment=\"1\"\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. There are EPDM rubber diaphragms inside the tanks, creating a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, tank models type 50 and 100 are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to that in car wheels, located at the rear of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46466136539479,"sku":"Z803","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_pion-poziom_150_z_manometrem.png?v=1724334282"},{"product_id":"sterownik-pompy-co-s-150","title":"C.0 pump controller. S-150","description":"\u003cp\u003eThe S-150 controller is designed to control the central heating water circulation pump. The task of the Controller is to turn on the pump if the temperature exceeds the set value and to turn it off if it drops below the set turn-off temperature. This prevents unnecessary operation of the pump, which allows you to save electricity (savings, depending on the degree of use of the furnace, can reach up to 60%) and extends the life of the pump.\u003c\/p\u003e\n\u003cp\u003eThis increases its reliability and reduces operating costs. Both the switching on and switching off temperatures can be set in the range of 0˚C–99˚C.\u003c\/p\u003e\n\u003cp\u003eThe hysteresis has been replaced with the ability to freely set the shutdown temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e Set temperature 34˚C (lower display), switch-off temperature 31˚C. If the sensor temperature reaches 34˚C, the pump will turn on at 34˚C and will work until the sensor temperature drops to 31˚C, then the controller will turn off the pump.\u003c\/p\u003e\n\u003cp\u003eThe S-150 central heating pump controller is equipped with 2 LED displays. The upper one normally displays the current temperature measured by the sensor, while the lower one shows the shutdown temperature. The MENU button switches the Controller to viewing mode and setting the switch-off and switch-on temperatures and setting the anti-stop function.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThermostat function\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe controller also has a built-in thermostat function. It is possible to set the temperature at which the controller will turn off the controlled devices and then, after lowering it to the desired value, will turn on the device. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnti-freeze function\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe controller is equipped with the ANTI-FREEZ function, thanks to which the controller will start the pump when the ambient temperature drops below 5˚C to prevent freezing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL DATA \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature control range (set temperature): 0°C–99°C,\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 230 V \/ 50 Hz ± 10%,\u003c\/li\u003e\n\u003cli\u003ePower consumption: \u003c 5 W,\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -10°C–40°C,\u003c\/li\u003e\n\u003cli\u003eTemperature sensor: Resistive,\u003c\/li\u003e\n\u003cli\u003eSensor cable length: ~ 1 m,\u003c\/li\u003e\n\u003cli\u003eLength of network cable ~ 1 m,\u003c\/li\u003e\n\u003cli\u003ePump power cable length: ~ 1 m,\u003c\/li\u003e\n\u003cli\u003eOutput: 230V \/ 50Hz,\u003c\/li\u003e\n\u003cli\u003eMax. output load current: pump 1A (resistive load)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46689555644759,"sku":"002711","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/sterownik_S-150.png?v=1724162206"},{"product_id":"lacze-antywibracyjne-1-proste-80cm","title":"Straight anti-vibration link 1\" 80cm","description":"\u003cp data-mce-fragment=\"1\"\u003eAnti-vibration links (straight)\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlexible anti-vibration connections made of synthetic EPDM rubber approved for contact with drinking water, with a metal braid protecting the discharge pipe.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe connections are finished with brass tips, on one side with a screw fitting equipped with a gasket and on the other with a nipple.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLinks available in sizes 30, 40, 50, 60, 80, 100 cm with thread diameter GW × MZ (1” × 1”).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for the distribution of water at temperatures up to 90°C.\u003c\/span\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46835961954647,"sku":"000178","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Lacze_antywibracyjne_proste.png?v=1724327566"},{"product_id":"lacze-antywibracyjne-1-proste100cm","title":"Straight anti-vibration link 1\" 100cm","description":"\u003cp data-mce-fragment=\"1\"\u003eAnti-vibration links (straight)\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlexible anti-vibration connections made of synthetic EPDM rubber approved for contact with drinking water, with a metal braid protecting the discharge pipe.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe connections are finished with brass tips, on one side with a screw fitting equipped with a gasket and on the other with a nipple.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLinks available in sizes 30, 40, 50, 60, 80, 100 cm with thread diameter GW × MZ (1” × 1”).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for the distribution of water at temperatures up to 90°C.\u003c\/span\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46835962085719,"sku":"000207","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Lacze_antywibracyjne_proste.png?v=1724327566"},{"product_id":"manometr","title":"Pressure gauge - 1\/4\" male","description":"The manometer is used to measure the pressure in the installation. Operating range from 0 to 10 bar, connection stub with 1\/4\" external thread.","brand":"IBO","offers":[{"title":"Default Title","offer_id":46835962216791,"sku":"0003","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/ManometrzLOGO.png?v=1726211477"},{"product_id":"waz-antywibracyjny-50-cm","title":"Anti-vibration knee hose 1” 54 cm","description":"\u003cp\u003e\u003cstrong\u003eAnti-vibration hoses with elbow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlexible anti-vibration hoses made of synthetic EPDM rubber, approved for contact with drinking water, with a metal braid protecting the discharge pipe. Hoses finished with brass tips. On one side, an elbow with a rotating union equipped with a seal, and on the other, a nipple. \u003c\/p\u003e\n\u003cp\u003eThe 54 cm long hose has an external diameter of 26 mm and a thread with GW × GZ (1” × 1”).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for pumps and hydrophore tanks, as well as all connections for the distribution of water at temperatures up to 90°C.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46835962347863,"sku":"0004","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Waz_antywibracyjny.png?v=1724327383"},{"product_id":"wlacznik-cisnieniowy-pc-sk-2-gw-zenski","title":"Pressure switch PC SK-2 GW female","description":"\u003cp\u003ePressure switches are designed to automatically switch on and off hydrophore sets complete with surface and submersible pumps equipped with an electric motor.\u003c\/p\u003e\n\u003cp\u003eThe switches control the operation of devices depending on the setting of the switch-on and switch-off pressure parameters.\u003c\/p\u003e\n\u003cp\u003eThe switches have a housing made of durable plastic and the contacts are copper or silver. Depending on the model, the devices have different values ​​of possible operating modes in a specific pressure range.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressure range: 1.2 - 5.0 Bar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. current: 12 A,\u003c\/li\u003e\n\u003cli\u003ePower supply: 230V,\u003c\/li\u003e\n\u003cli\u003eConnector diameter: 1\/4\", GW\/MW. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46835971555671,"sku":"0005","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC_SK_2.png?v=1720006841"},{"product_id":"wyjscie-tloczne-pieciodrozne-70mm","title":"Five-way discharge outlet 1\" \/ 70 mm","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe enabler \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003einstallation\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e several different components for the pump, such as: pressure gauge, pressure switch, suction and discharge port, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eHeight: 70 mm,\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pumps: 1\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pressure installation: 1\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection anti-vibration hose: 1\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pressure gauge: 1\/4\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pressure switch: 1\/4\".\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46835972145495,"sku":"0006","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Wyjscie_tloczne_pieciodrozne.png?v=1724406393"},{"product_id":"zawor-zwrotny-1-2","title":"1\/2\" check valve","description":"\u003cp data-mce-fragment=\"1\"\u003eBackflow protection valve. Brass insert.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSize: 1\/2\",\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 130 g,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature: (-15) - 120°C,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum input pressure: 16 bar.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857555476823,"sku":"0202","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Zawor_zwrotny_ZW.png?v=1724414219"},{"product_id":"wlacznik-sk-15-z-kablem","title":"SK-15 switch with cable - hydrophore machine","description":"\u003cp\u003eAutomatic device controlling the operation of surface and deep-well pumps. Replaces the pressure switch and hydrophore tank. Turning on the tap sends a signal to the SK-15 machine, which starts the pump. Turning off the tap causes the SK-15 to turn off the pump. The machine can operate with single-phase pumps with a power of up to 1100 W, whose current consumption during operation is up to 10 A. The device has a dry-running protection function. When there is no water in the well, the device will turn off the pump. SK-15 is equipped with 1\" diameter connectors. The device is supplied with a 1 m cable with a plug and a 60 cm cable with a socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction\/discharge port: 1\",\u003c\/li\u003e\n\u003cli\u003eBuilt-in check valve,\u003c\/li\u003e\n\u003cli\u003eDry-running protection,\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure gauge,\u003c\/li\u003e\n\u003cli\u003eManual RESET button,\u003c\/li\u003e\n\u003cli\u003eIndicating diode Power supply POWER,\u003c\/li\u003e\n\u003cli\u003eLED indicating pump operation ON,\u003c\/li\u003e\n\u003cli\u003eFAILURE failure diode,\u003c\/li\u003e\n\u003cli\u003eAutomatic RESTART\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: 1~230 V,\u003c\/li\u003e\n\u003cli\u003eDegree of protection: IP65,\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 40°C,\u003c\/li\u003e\n\u003cli\u003eSwitching pressure - 1.5-3 bar,\u003c\/li\u003e\n\u003cli\u003ePermissible maximum pressure in the system: 10 bar,\u003c\/li\u003e\n\u003cli\u003eMaximum current 10 A (at start-up 16\u003cspan\u003e \u003c\/span\u003eA).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857556787543,"sku":"000860","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/SK_15.png?v=1724238062"},{"product_id":"wlacznik-pc-2-zintegrowany-z-manometrem","title":"PC-2 switch integrated with the pressure gauge","description":"\u003cp\u003ePressure switches are designed to automatically switch on and off hydrophore sets complete with surface and submersible pumps equipped with an electric motor.\u003c\/p\u003e\n\u003cp\u003eThe switches control the operation of devices depending on the setting of the switch-on and switch-off pressure parameters.\u003c\/p\u003e\n\u003cp\u003eThe switches have a housing made of durable plastic and the contacts are copper or silver. Depending on the model, the devices have different values ​​of possible operating modes in a specific pressure range.\u003c\/p\u003e\n\u003cp\u003eThe PC-2 switch is additionally equipped with a pressure gauge, and its design is based on a five-way pressure outlet, so it can be used as a complete accessory for a hydrophore set. PC-2 has 1\" connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressure range: 1.6-4.6 bar,\u003c\/li\u003e\n\u003cli\u003eMaximum current: 12 A,\u003c\/li\u003e\n\u003cli\u003ePower supply: 230V,\u003c\/li\u003e\n\u003cli\u003eConnector diameter: 1\",\u003c\/li\u003e\n\u003cli\u003eThread type: external (GZ).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857556820311,"sku":"000862","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC_2.png?v=1725013953"},{"product_id":"zawor-zwrotny-3-4","title":"3\/4\" check valve","description":"\u003cp data-mce-fragment=\"1\"\u003eBackflow protection valve. Brass insert.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSize: 13\/4\",\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 205 g,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature: (-15) - 120°C,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum input pressure: 16 bar.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857556885847,"sku":"001332","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Zawor_zwrotny_ZW.png?v=1724414219"},{"product_id":"zbiornik-150-poziomy","title":"150 horizontal diaphragm tank","description":"\u003cp data-mce-fragment=\"1\"\u003eHorizontal expansion tanks type 24–150 used for storing water in water supply systems. IBO expansion vessels are designed to stabilize water pressure and increase the active volume of the water supply system. Used to work with pumps with parameters corresponding to the tank parameters. The tanks are made of thick carbon steel and covered with a special anti-corrosion varnish. Inside the tanks there are EPDM rubber diaphragms that create a membrane between the water inside and the outer shell of the tank. There is compressed air between the membrane and the tank housing, which releases water from the tank under pressure. By using tanks in hydrophore sets, you can limit the number of pump starts in a given period of time, which affects the life of the entire installation. Additionally, type 50 and type 100 tank models are available with a built-in pressure gauge. The volume of water inside is the difference between the volume of the housing and the volume of air around the membrane.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe tanks have a special valve used to pump or release air from the tank - a valve identical to the one in car wheels, located at the back of the tank, under the cover. IBO expansion vessels are pressure devices that meet the requirements of Directive 2014\/68\/EU.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn combination with surface or deep-well pumps, they create hydrophore sets intended for supplying water from the intakes of own plots, single- and multi-family houses, farms and enterprises.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857557901655,"sku":"001049","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/zbiornik_IBO_poziomy_80.png?v=1724334406"},{"product_id":"zawor-zwrotny-1","title":"1\" check valve","description":"\u003cp data-mce-fragment=\"1\"\u003eBackflow protection valve. Brass.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSize: 1\",\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 250 g,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature: (-15) - 120°C,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum input pressure: 16 bar.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857558229335,"sku":"001333","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Zawor_zwrotny_ZW.png?v=1724414219"},{"product_id":"zawor-zwrotny-1-1-4","title":"1-1\/4\" check valve","description":"\u003cp data-mce-fragment=\"1\"\u003eBackflow protection valve. Brass insert.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSize: 1-1\/4\",\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 410 g,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature: (-15) - 120°C,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum input pressure: 16 bar.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857559605591,"sku":"001334","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Zawor_zwrotny_ZW.png?v=1724414219"},{"product_id":"zawor-zwrotny-1-1-2","title":"1-1\/2\" check valve","description":"\u003cp\u003eBackflow protection valve. Brass.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 1-1\/2\",\u003c\/li\u003e\n\u003cli\u003eWeight: 660 g,\u003c\/li\u003e\n\u003cli\u003eTemperature: (-15) - 120°C,\u003c\/li\u003e\n\u003cli\u003eMaximum input pressure: 16 bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857572122967,"sku":"001335","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Zawor_zwrotny_ZW.png?v=1724414219"},{"product_id":"zawor-zwrotny-2","title":"2\" check valve","description":"\u003cp data-mce-fragment=\"1\"\u003eBackflow protection valve. Brass insert.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSize: 2\",\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 1000 g,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature: (-15) - 120°C,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum input pressure: 16 bar.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857572155735,"sku":"001336","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Zawor_zwrotny_ZW.png?v=1724414219"},{"product_id":"lacze-antywibracyjne-1-proste-70cm","title":"Straight anti-vibration link 1\" 70cm","description":"\u003cp data-mce-fragment=\"1\"\u003eAnti-vibration links (straight)\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlexible anti-vibration connections made of synthetic EPDM rubber approved for contact with drinking water, with a metal braid protecting the discharge pipe.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe connections are finished with brass tips, on one side with a screw fitting equipped with a gasket and on the other with a nipple.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLinks available in sizes 30, 40, 50, 60, 80, 100 cm with thread diameter GW × MZ (1” × 1”).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for the distribution of water at temperatures up to 90°C.\u003c\/span\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857618620759,"sku":"001471","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Lacze_antywibracyjne_proste.png?v=1724327566"},{"product_id":"wlacznik-pc-13","title":"PC-13 switch - hydrophore machine","description":"\u003cp\u003eThe PC-13 automatic device is designed to control the pump by turning the device on and off. Switching on depends on the drop in water pressure in the water installation below the minimum pressure set on the device and on the creation of flow in the pipe on which the PC-13 device is installed. Turning off depends on stopping the water flow in the pipe on which the PC regulator is installed. The device turns on the pump when you turn on the water tap or when the sprinklers are opened, and turns it off when the tap or sprinklers are closed. The device has a dry-running protection function (operation of the pump without water). In the event of a lack of water, the automatic device turns off the pump, preventing its destruction. The device can operate directly connected to pumps whose motors do not consume more current than 10 A during operation (up to 16 A when starting). The device protects the installation against flooding due to small leaks. A leak causes a pressure drop in the installation, but the device will not turn on because it does not detect water flow (with small leaks, the water flow is negligible). The device is equipped with a 1 m cable with a plug and a 60 cm cable with a socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction\/discharge port: 1\",\u003c\/li\u003e\n\u003cli\u003eBuilt-in check valve,\u003c\/li\u003e\n\u003cli\u003eDry-running protection,\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure gauge,\u003c\/li\u003e\n\u003cli\u003eManual RESET button,\u003c\/li\u003e\n\u003cli\u003eIndicating diode Power supply POWER,\u003c\/li\u003e\n\u003cli\u003eLED indicating pump operation ON.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: 1~230 V,\u003c\/li\u003e\n\u003cli\u003eDegree of protection: IP65,\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 40°C,\u003c\/li\u003e\n\u003cli\u003eSwitching pressure - 1.5-3 bar,\u003c\/li\u003e\n\u003cli\u003ePermissible maximum pressure in the system: 10 bar,\u003c\/li\u003e\n\u003cli\u003eMaximum current 10 A (at startup 16 A).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857618817367,"sku":"001515","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC_13.png?v=1724237505"},{"product_id":"wyjscie-tloczne-5-drozne-inverter-1-1-4","title":"Five-way pressure output of the 1-1\/4\" inverter","description":"\u003ch2\u003eBrief description\u003c\/h2\u003e \u003cp\u003eThe five-way discharge outlet of the inverter is an element of installation fittings that allows the connection of several components (including a pressure gauge, pressure switch, suction and discharge connections) to one inverter. It is designed to work in water and hydrophore installations, with a maximum pressure of 16 bar and a medium temperature of up to 90°C. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003ch2\u003eFor whom\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003eInstallers of hydrophore systems - easier installation of a pressure gauge, pressure switch and spigots on one, compact outlet.\u003c\/li\u003e   \u003cli\u003eCompanies servicing pumps and inverters – convenient access to measurement points and service fittings in one module.\u003c\/li\u003e   \u003cli\u003eDesigners of small pressure boosting stations – orderly installation of equipment at the inverter discharge outlet.\u003c\/li\u003e   \u003cli\u003eUsers of home installations and small facilities - more stable operation of the system with automatic pressure control.\u003c\/li\u003e   \u003cli\u003eWater fittings distributors – a universal element compatible with typical pump and inverter solutions.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eApplication\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003eHydrophore installations with an inverter, where it is necessary to connect a pressure gauge, a pressure switch and suction and discharge connections in one place.\u003c\/li\u003e   \u003cli\u003ePressure boosting systems in residential buildings and small service facilities, with automatic regulation of pump operation.\u003c\/li\u003e   \u003cli\u003eWater supply and technological installations where pressure supervision and the possibility of expanding the system with additional elements are required.\u003c\/li\u003e   \u003cli\u003eInverter-controlled pump sets, where compact and orderly installation of fittings at the discharge outlet is important.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe five-way pressure output of the inverter is particularly useful in hydrophore installations with an inverter, which require convenient connection of several pressure components in one place.\u003c\/p\u003e \u003ch2\u003eFeatures, description and technical data\u003c\/h2\u003e \u003cp\u003eThe five-way discharge outlet of the inverter is a specialized element of installation fittings, mounted on the discharge outlet of the pump or hydrophore set cooperating with the inverter. Its design allows for the simultaneous connection of several key components responsible for measuring and controlling pressure and distributing the medium in the installation.\u003c\/p\u003e \u003cp\u003eThis element allows the installation of components such as a pressure gauge, pressure switch, suction port, discharge port and additional service or vent connections - depending on the installation configuration. This facilitates the orderly installation of fittings and shortens the installation and servicing time of the entire system. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003cp\u003eThe five-way discharge output of the inverter is designed to operate at a maximum working pressure of 16 bar and a maximum medium temperature of 90°C, which meets the typical requirements of water installations, hydrophores and small pressure boosting systems. It can be used both in home installations and in small service and industrial facilities, in accordance with the project requirements.\u003c\/p\u003e \u003cp\u003eAs a standard, the element is mounted directly on the discharge section of the pump or on the discharge manifold of the set cooperating with the inverter, in compliance with the recommendations of the system manufacturer and the principles of proper pipeline fittings. The exact dimensions, type of threads and material should be checked each time in the catalog card of a specific model. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003cul\u003e   \u003cli\u003eElement type: five-way inverter discharge output (installation fittings).\u003c\/li\u003e   \u003cli\u003eMain purpose: installation of a pressure gauge, pressure switch, suction and discharge connections and additional components at the inverter.\u003c\/li\u003e   \u003cli\u003eMaximum working pressure: 16 bar.\u003c\/li\u003e   \u003cli\u003eMaximum medium temperature: 90°C.\u003c\/li\u003e   \u003cli\u003eInstallation method: on the discharge section of the pump or hydrophore set cooperating with the inverter (details in the model documentation).\u003c\/li\u003e    \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eThe integrated non-return valve in the five-way outlet prevents water from flowing back into the pump, helps maintain the pressure in the installation and ensures its tightness and reliable operation.\n\n\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePractical entries for the pressure gauge, sensor and expansion vessel ensure easy expansion and convenient configuration of the hydrophore system.\u003c\/p\u003e\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e \u003ch2\u003eFrequently asked questions (FAQ) – what is the five-way inverter discharge output used for?\u003c\/h2\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eWhat is the five-way pressure output of the inverter used for?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way discharge output of the inverter is used to install several pieces of equipment (including a pressure gauge, pressure switch, suction and discharge connections) in one compact module at the output of the inverter system. \u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eIn what installations is the five-way inverter discharge output used?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way pressure output of the inverter is mainly used in hydrophore installations, pressure boosting sets and water systems with an inverter, where it is required to connect several control components in one place.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eIs the inverter's five-way pressure output available online and in stationary stores?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eProducts of this type are usually available for sale online and in wholesalers and stationary stores selling installation fittings. You can check the detailed availability of a specific model directly with the seller.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eHow to choose the appropriate size of the five-way discharge outlet for the inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe selection of the five-way discharge outlet should be based on the system parameters: diameter of the pump and fitting connections, required operating pressure, medium temperature and the recommendations of the inverter and pump manufacturer.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eHow to properly install the five-way pressure output of the inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe discharge outlet is mounted on the discharge section of the pump or on the set's collector, using appropriate seals, in accordance with the manufacturer's diagram and the direction of medium flow. Before the first start-up, check the tightness of all connections.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eWhat is the maximum operating pressure and temperature of the discharge output of the five-way inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way discharge output of the inverter is designed to operate at a maximum pressure of 16 bar and a maximum medium temperature of 90°C. Detailed parameters of a specific model should always be checked in the catalog card.\u003c\/p\u003e \u003c\/details\u003e \u003cscript type=\"application\/ld+json\"\u003e {   \"@context\": \"https:\/\/schema.org\",   \"@type\": \"FAQPage\",   \"mainEntity\": [     {       \"@type\": \"Question\",       \"name\": \"Do czego służy wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera służy do montażu kilku elementów osprzętu (m.in. manometru, wyłącznika ciśnieniowego, króćców ssącego i tłocznego) w jednym module na wyjściu układu z inwerterem. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"W jakich instalacjach stosuje się wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera stosuje się w instalacjach hydroforowych, zestawach podnoszenia ciśnienia oraz układach wodnych z inwerterem, gdzie wymagane jest podłączenie kilku podzespołów kontrolnych w jednym miejscu. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Czy wyjście tłoczne pięciodrożne inwertera jest dostępne online i stacjonarnie?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Produkty tego typu są zazwyczaj dostępne w sprzedaży online oraz w hurtowniach i sklepach stacjonarnych z armaturą instalacyjną. Szczegółową dostępność konkretnego modelu sprawdzisz bezpośrednio u sprzedawcy.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jak dobrać odpowiedni rozmiar wyjścia tłocznego pięciodrożnego do inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Dobór wyjścia tłocznego pięciodrożnego należy oprzeć na parametrach układu: średnicy przyłączy, wymaganym ciśnieniu roboczym, temperaturze medium oraz zaleceniach producenta inwertera i pompy. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jak prawidłowo zamontować wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne montuje się na odcinku tłocznym pompy lub na kolektorze zestawu, z użyciem odpowiednich uszczelnień, zgodnie ze schematem producenta oraz kierunkiem przepływu medium. Przed pierwszym uruchomieniem należy sprawdzić szczelność wszystkich połączeń. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jakie jest maksymalne ciśnienie i temperatura pracy wyjścia tłocznego pięciodrożnego inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera jest przystosowane do pracy przy maksymalnym ciśnieniu 16 bar oraz maksymalnej temperaturze medium 90°C. Szczegółowe parametry konkretnego modelu należy każdorazowo sprawdzić w karcie katalogowej.\"       }     }   ] } \u003c\/script\u003e ","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857619571031,"sku":"001542","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/wyjscie_tloczone_5_drozne_inverter.png?v=1737642634"},{"product_id":"wyjscie-tloczne-5-drozne-inverter-1-1-2","title":"Five-way pressure output of the 1-1\/2\" inverter","description":"\u003ch2\u003eBrief description\u003c\/h2\u003e \u003cp\u003eThe five-way discharge outlet of the inverter is an element of installation fittings that allows the connection of several components (including a pressure gauge, pressure switch, suction and discharge connections) to one inverter. It is designed to work in water and hydrophore installations, with a maximum pressure of 16 bar and a medium temperature of up to 90°C. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003ch2\u003eFor whom\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003eInstallers of hydrophore systems - easier installation of a pressure gauge, pressure switch and spigots on one, compact outlet.\u003c\/li\u003e   \u003cli\u003eCompanies servicing pumps and inverters – convenient access to measurement points and service fittings in one module.\u003c\/li\u003e   \u003cli\u003eDesigners of small pressure boosting stations – orderly installation of equipment at the inverter discharge outlet.\u003c\/li\u003e   \u003cli\u003eUsers of home installations and small facilities - more stable operation of the system with automatic pressure control.\u003c\/li\u003e   \u003cli\u003eWater fittings distributors – a universal element compatible with typical pump and inverter solutions.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eApplication\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003eHydrophore installations with an inverter, where it is necessary to connect a pressure gauge, a pressure switch and suction and discharge connections in one place.\u003c\/li\u003e   \u003cli\u003ePressure boosting systems in residential buildings and small service facilities, with automatic regulation of pump operation.\u003c\/li\u003e   \u003cli\u003eWater supply and technological installations where pressure supervision and the possibility of expanding the system with additional elements are required.\u003c\/li\u003e   \u003cli\u003eInverter-controlled pump sets, where compact and orderly installation of fittings at the discharge outlet is important.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe five-way pressure output of the inverter is particularly useful in hydrophore installations with an inverter, which require convenient connection of several pressure components in one place.\u003c\/p\u003e \u003ch2\u003eFeatures, description and technical data\u003c\/h2\u003e \u003cp\u003eThe five-way discharge outlet of the inverter is a specialized element of installation fittings, mounted on the discharge outlet of the pump or hydrophore set cooperating with the inverter. Its design allows for the simultaneous connection of several key components responsible for measuring and controlling pressure and distributing the medium in the installation.\u003c\/p\u003e \u003cp\u003eThis element allows the installation of components such as a pressure gauge, pressure switch, suction port, discharge port and additional service or vent connections - depending on the installation configuration. This facilitates the orderly installation of fittings and shortens the installation and servicing time of the entire system. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003cp\u003eThe five-way discharge output of the inverter is designed to operate at a maximum working pressure of 16 bar and a maximum medium temperature of 90°C, which meets the typical requirements of water installations, hydrophores and small pressure boosting systems. It can be used both in home installations and in small service and industrial facilities, in accordance with the project requirements.\u003c\/p\u003e \u003cp\u003eAs a standard, the element is mounted directly on the discharge section of the pump or on the discharge manifold of the set cooperating with the inverter, in compliance with the recommendations of the system manufacturer and the principles of proper pipeline fittings. The exact dimensions, type of threads and material should be checked each time in the catalog card of a specific model. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003cul\u003e   \u003cli\u003eElement type: five-way inverter discharge output (installation fittings).\u003c\/li\u003e   \u003cli\u003eMain purpose: installation of a pressure gauge, pressure switch, suction and discharge connections and additional components at the inverter.\u003c\/li\u003e   \u003cli\u003eMaximum working pressure: 16 bar.\u003c\/li\u003e   \u003cli\u003eMaximum medium temperature: 90°C.\u003c\/li\u003e   \u003cli\u003eInstallation method: on the discharge section of the pump or hydrophore set cooperating with the inverter (details in the model documentation).\u003c\/li\u003e    \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eThe integrated non-return valve in the five-way outlet prevents water from flowing back into the pump, helps maintain the pressure in the installation and ensures its tightness and reliable operation.\n\n\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePractical entries for the pressure gauge, sensor and expansion vessel ensure easy expansion and convenient configuration of the hydrophore system.\u003c\/p\u003e\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e \u003ch2\u003eFrequently asked questions (FAQ) – what is the five-way inverter discharge output used for?\u003c\/h2\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eWhat is the five-way pressure output of the inverter used for?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way discharge output of the inverter is used to install several pieces of equipment (including a pressure gauge, pressure switch, suction and discharge connections) in one compact module at the output of the inverter system. \u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eIn what installations is the five-way inverter discharge output used?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way pressure output of the inverter is mainly used in hydrophore installations, pressure boosting sets and water systems with an inverter, where it is required to connect several control components in one place.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eIs the inverter's five-way pressure output available online and in stationary stores?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eProducts of this type are usually available for sale online and in wholesalers and stationary stores selling installation fittings. You can check the detailed availability of a specific model directly with the seller.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eHow to choose the appropriate size of the five-way discharge outlet for the inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe selection of the five-way discharge outlet should be based on the system parameters: diameter of the pump and fitting connections, required operating pressure, medium temperature and the recommendations of the inverter and pump manufacturer.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eHow to properly install the five-way pressure output of the inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe discharge outlet is mounted on the discharge section of the pump or on the set's collector, using appropriate seals, in accordance with the manufacturer's diagram and the direction of medium flow. Before the first start-up, check the tightness of all connections.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eWhat is the maximum operating pressure and temperature of the discharge output of the five-way inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way discharge output of the inverter is designed to operate at a maximum pressure of 16 bar and a maximum medium temperature of 90°C. Detailed parameters of a specific model should always be checked in the catalog card.\u003c\/p\u003e \u003c\/details\u003e \u003cscript type=\"application\/ld+json\"\u003e {   \"@context\": \"https:\/\/schema.org\",   \"@type\": \"FAQPage\",   \"mainEntity\": [     {       \"@type\": \"Question\",       \"name\": \"Do czego służy wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera służy do montażu kilku elementów osprzętu (m.in. manometru, wyłącznika ciśnieniowego, króćców ssącego i tłocznego) w jednym module na wyjściu układu z inwerterem. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"W jakich instalacjach stosuje się wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera stosuje się w instalacjach hydroforowych, zestawach podnoszenia ciśnienia oraz układach wodnych z inwerterem, gdzie wymagane jest podłączenie kilku podzespołów kontrolnych w jednym miejscu. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Czy wyjście tłoczne pięciodrożne inwertera jest dostępne online i stacjonarnie?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Produkty tego typu są zazwyczaj dostępne w sprzedaży online oraz w hurtowniach i sklepach stacjonarnych z armaturą instalacyjną. Szczegółową dostępność konkretnego modelu sprawdzisz bezpośrednio u sprzedawcy.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jak dobrać odpowiedni rozmiar wyjścia tłocznego pięciodrożnego do inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Dobór wyjścia tłocznego pięciodrożnego należy oprzeć na parametrach układu: średnicy przyłączy, wymaganym ciśnieniu roboczym, temperaturze medium oraz zaleceniach producenta inwertera i pompy. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jak prawidłowo zamontować wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne montuje się na odcinku tłocznym pompy lub na kolektorze zestawu, z użyciem odpowiednich uszczelnień, zgodnie ze schematem producenta oraz kierunkiem przepływu medium. Przed pierwszym uruchomieniem należy sprawdzić szczelność wszystkich połączeń. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jakie jest maksymalne ciśnienie i temperatura pracy wyjścia tłocznego pięciodrożnego inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera jest przystosowane do pracy przy maksymalnym ciśnieniu 16 bar oraz maksymalnej temperaturze medium 90°C. Szczegółowe parametry konkretnego modelu należy każdorazowo sprawdzić w karcie katalogowej.\"       }     }   ] } \u003c\/script\u003e ","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857619603799,"sku":"001543","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/wyjscietloczone5drozneinverter.png?v=1737642696"},{"product_id":"manometr-do-inwertera","title":"Pressure gauge for the inverter \/ inverter","description":"\u003cp\u003ePARAMETERS:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressure range: 0-16 bar\u003c\/li\u003e\n\u003cli\u003eThread: \u003cspan data-mce-fragment=\"1\" style=\"font-size: 14px;\"\u003e¼\"\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857619636567,"sku":"001544","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Manometrdofalownika.png?v=1781071710"},{"product_id":"waz-antywibracyjny100-cm","title":"Anti-vibration knee hose 1” 100 cm","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAnti-vibration hoses with elbow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFlexible anti-vibration hoses made of synthetic EPDM rubber, approved for contact with drinking water, with a metal braid protecting the discharge pipe. Hoses finished with brass tips. On one side, an elbow with a rotating union equipped with a seal, and on the other, a nipple.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHoses with a length of 100 cm have an external diameter of 32 mm and a thread GW × MZ (1” × 1”).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for pumps and hydrophore tanks, as well as all connections for the distribution of water at temperatures up to 90°C.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857621766487,"sku":"001624","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Waz_antywibracyjny.png?v=1724327383"},{"product_id":"manometr-do-reduktora-cisnienia","title":"Pressure gauge for pressure reducer","description":"PARAMETERS:\n\u003cul\u003e\n\u003cli\u003eDisc diameter: 52 mm\u003c\/li\u003e\n\u003cli\u003eMeasuring range: 0-10 bar\u003c\/li\u003e\n\u003cli\u003eThread: 1\/4\" (12.5mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857649717591,"sku":"001651","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/manometr.png?v=1724149060"},{"product_id":"wlacznik-cisnieniowy-dig-ibo-elektroniczny","title":"DIG-IBO 1 electronic pressure switch","description":"\u003ch2\u003eDIG-IBO 1 electronic pressure switch\u003c\/h2\u003e\n\u003cp\u003eDIG-IBO 1 by IBO is an electronic pressure switch for surface pumps. It controls the pump operation based on water pressure and flow, protecting it against dry running. The switching on and off thresholds are set on the display, thanks to which the installation maintains constant pressure and the pump does not run unnecessarily.\u003c\/p\u003e\n\u003ch2\u003eFor whom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstallers and plumbers - simple setting of pressure thresholds on the display facilitates the process of starting the hydrophore system.\u003c\/li\u003e\n\u003cli\u003eHome owners with their own water intake - the switch maintains constant pressure and stops the pump itself when there is no water.\u003c\/li\u003e\n\u003cli\u003eUsers of hydrophore sets - the controller limits unnecessary pump activations, which extends its service life.\u003c\/li\u003e\n\u003cli\u003eAllotment gardeners and farms - automates the operation of the surface pump for daily water consumption and watering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eDIG-IBO 1 works well in home and garden water installations with a surface pump. It works in networks equipped with a hydrophore tank. Turns the pump on when the pressure drops below the set threshold and flow occurs, and turns it off when the flow stops.\u003c\/p\u003e\n\u003cp\u003eSingle-phase pumps are connected directly, and three-phase pumps are connected via a contactor. The pump is controlled by an electronic pressure switch DIG-IBO 1, 230 V.\u003c\/p\u003e\n\u003ch2\u003eFeatures of the DIG-IBO switch 1\u003c\/h2\u003e\n\u003cp\u003eThe device's functionality combines pump control with protection against dry running. The pump turns on when the pressure drops and the flow is activated, and turns off when the flow disappears. Pressure thresholds are set using buttons on the display, and the entered values ​​are saved automatically.\u003c\/p\u003e\n\u003cp\u003eDry-running protection is enabled by default. When the pump runs without water, the switch stops it. The function can be disabled if necessary. DIG-IBO 1 is intended for surface pumps and should work in an installation with a hydrophore tank. Below are the most important parameters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: \u003cstrong\u003eIBO\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: \u003cstrong\u003eelectronic pressure switch for surface pumps\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply: \u003cstrong\u003e230V, 50Hz\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum power of the supported pump: \u003cstrong\u003e1.5 kW\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorking range (pressure): \u003cstrong\u003e0–10 bar\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDegree of protection: \u003cstrong\u003eIP66\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecurity: \u003cstrong\u003edry running protection (enabled by default)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: \u003cstrong\u003e80°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooperation with pumps: \u003cstrong\u003esingle-phase directly, three-phase via contactor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIBO – 24 months (2 years) manufacturer's warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions (FAQ) – DIG-IBO circuit breaker 1\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the DIG-IBO 1 pressure switch used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch4 id=\"dig-ibo-zastosowanie\"\u003e\u003c\/h4\u003e\n\u003cp\u003eDIG-IBO 1 automatically turns the surface pump on and off depending on water pressure and flow. It also protects the pump against dry running and maintains constant pressure in the installation with the hydrophore tank.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat pumps does DIG-IBO 1 work with?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch4 id=\"dig-ibo-pompy\"\u003e\u003c\/h4\u003e\n\u003cp\u003eThe switch is designed for surface pumps with a power of up to 1.5 kW with a 230 V power supply. Single-phase pumps are connected directly, and three-phase pumps are connected via a contactor.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes DIG-IBO 1 protect the pump against dry running?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch4 id=\"dig-ibo-suchobieg\"\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. Dry-running protection is enabled by default. When the pump runs without water, the device turns it off. The function can be disabled if necessary.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes DIG-IBO 1 require a hydrophore tank?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch4 id=\"dig-ibo-zbiornik\"\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. The device should operate in an installation with a hydrophore tank. This ensures stable operation and correct pressure and flow readings.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs DIG-IBO 1 suitable for submersible pumps?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch4 id=\"dig-ibo-powierzchniowe\"\u003e\u003c\/h4\u003e\n\u003cp\u003eDIG-IBO 1 is intended for surface pumps. For pumps of a different type or with higher power, it is worth choosing a different model. The full range of products designed for this task can be found in the tab \u003ca href=\"https:\/\/dambat.pl\/collections\/sterowniki\"\u003edrivers\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere to buy the DIG-IBO 1 switch?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch4 id=\"dig-ibo-gdzie-kupic\"\u003e\u003c\/h4\u003e\n\u003cp\u003eAs a manufacturer, we do not sell directly. The DIG-IBO 1 switch by IBO can be purchased from our trading partners, installation wholesalers and authorized online distributors.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the warranty for the DIG-IBO 1 switch?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch4 id=\"dig-ibo-gwarancja\"\u003e\u003c\/h4\u003e\n\u003cp\u003eIBO – 24 months (2 years) manufacturer's warranty.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857651192151,"sku":"001789","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/DIG_IBO_1.png?v=1724236481"},{"product_id":"wlacznik-pc-15-b","title":"PC-15 switch - hydrophore machine","description":"\u003cp\u003eAn automatic device controlling the operation of surface and deep-well pumps with a power of up to 1100 W. It replaces a pressure switch and a hydrophore tank. Turning on the tap sends a signal to the PC-15 machine, which starts the pump. Turning off the tap causes the PC-15 to turn off the pump. The machine can operate with single-phase pumps whose current consumption does not exceed 10 A during operation. The device has a dry-running protection function. When there is no water in the well, the device will turn off the pump. The device is equipped with a 60 cm long cable for connection to the pump and a 1 m long power cable with a plug. PC-15 is equipped with a 1\" diameter connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction\/discharge port: 1\",\u003c\/li\u003e\n\u003cli\u003eBuilt-in check valve,\u003c\/li\u003e\n\u003cli\u003eDry-running protection,\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure gauge,\u003c\/li\u003e\n\u003cli\u003eManual RESET button,\u003c\/li\u003e\n\u003cli\u003eIndicating diode Power supply POWER,\u003c\/li\u003e\n\u003cli\u003eLED indicating pump operation ON,\u003c\/li\u003e\n\u003cli\u003eLED indicating FAILURE failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: 1~230 V,\u003c\/li\u003e\n\u003cli\u003eDegree of protection: IP65,\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 40°C,\u003c\/li\u003e\n\u003cli\u003eSwitching pressure - 1.5-3 bar,\u003c\/li\u003e\n\u003cli\u003ePermissible maximum pressure in the system: 10 bar,\u003c\/li\u003e\n\u003cli\u003eMaximum current 10\u003cspan\u003e \u003c\/span\u003eA (at starting 16 A).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857695330647,"sku":"0019","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC-15.png?v=1744711067"},{"product_id":"waz-antywibracyjny-60-cm","title":"Anti-vibration elbow hose 1” 60 cm","description":"\u003cp\u003e\u003cstrong\u003eAnti-vibration hoses with elbow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlexible anti-vibration hoses made of synthetic EPDM rubber, approved for contact with drinking water, with a metal braid protecting the discharge pipe. Hoses finished with brass tips. On one side, an elbow with a rotating union equipped with a seal, and on the other, a nipple.\u003c\/p\u003e\n\u003cp\u003eHoses with a length of 60 cm, 70 cm, 80 cm have an external diameter of 32 mm and a thread GW × MZ (1” × 1”).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for pumps and hydrophore tanks, as well as all connections for the distribution of water at temperatures up to 90°C.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857696117079,"sku":"0020","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Waz_antywibracyjny.png?v=1724327383"},{"product_id":"wyjscie-tloczne-5-drozne-invertera-2","title":"Five-way pressure output of the 2\" inverter","description":"\u003ch2\u003eBrief description\u003c\/h2\u003e \u003cp\u003eThe five-way discharge outlet of the inverter is an element of installation fittings that allows the connection of several components (including a pressure gauge, pressure switch, suction and discharge connections) to one inverter. It is designed to work in water and hydrophore installations, with a maximum pressure of 16 bar and a medium temperature of up to 90°C. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003ch2\u003eFor whom\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003eInstallers of hydrophore systems - easier installation of a pressure gauge, pressure switch and spigots on one, compact outlet.\u003c\/li\u003e   \u003cli\u003eCompanies servicing pumps and inverters – convenient access to measurement points and service fittings in one module.\u003c\/li\u003e   \u003cli\u003eDesigners of small pressure boosting stations – orderly installation of equipment at the inverter discharge outlet.\u003c\/li\u003e   \u003cli\u003eUsers of home installations and small facilities - more stable operation of the system with automatic pressure control.\u003c\/li\u003e   \u003cli\u003eWater fittings distributors – a universal element compatible with typical pump and inverter solutions.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eApplication\u003c\/h2\u003e \u003cul\u003e   \u003cli\u003eHydrophore installations with an inverter, where it is necessary to connect a pressure gauge, a pressure switch and suction and discharge connections in one place.\u003c\/li\u003e   \u003cli\u003ePressure boosting systems in residential buildings and small service facilities, with automatic regulation of pump operation.\u003c\/li\u003e   \u003cli\u003eWater supply and technological installations where pressure supervision and the possibility of expanding the system with additional elements are required.\u003c\/li\u003e   \u003cli\u003eInverter-controlled pump sets, where compact and orderly installation of fittings at the discharge outlet is important.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe five-way pressure output of the inverter is particularly useful in hydrophore installations with an inverter, which require convenient connection of several pressure components in one place.\u003c\/p\u003e \u003ch2\u003eFeatures, description and technical data\u003c\/h2\u003e \u003cp\u003eThe five-way discharge outlet of the inverter is a specialized element of installation fittings, mounted on the discharge outlet of the pump or hydrophore set cooperating with the inverter. Its design allows for the simultaneous connection of several key components responsible for measuring and controlling pressure and distributing the medium in the installation.\u003c\/p\u003e \u003cp\u003eThis element allows the installation of components such as a pressure gauge, pressure switch, suction port, discharge port and additional service or vent connections - depending on the installation configuration. This facilitates the orderly installation of fittings and shortens the installation and servicing time of the entire system. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003cp\u003eThe five-way discharge output of the inverter is designed to operate at a maximum working pressure of 16 bar and a maximum medium temperature of 90°C, which meets the typical requirements of water installations, hydrophores and small pressure boosting systems. It can be used both in home installations and in small service and industrial facilities, in accordance with the project requirements.\u003c\/p\u003e \u003cp\u003eAs a standard, the element is mounted directly on the discharge section of the pump or on the discharge manifold of the set cooperating with the inverter, in compliance with the recommendations of the system manufacturer and the principles of proper pipeline fittings. The exact dimensions, type of threads and material should be checked each time in the catalog card of a specific model. Content compiled from general data. Contact us for details.\u003c\/p\u003e \u003cul\u003e   \u003cli\u003eElement type: five-way inverter discharge output (installation fittings).\u003c\/li\u003e   \u003cli\u003eMain purpose: installation of a pressure gauge, pressure switch, suction and discharge connections and additional components at the inverter.\u003c\/li\u003e   \u003cli\u003eMaximum working pressure: 16 bar.\u003c\/li\u003e   \u003cli\u003eMaximum medium temperature: 90°C.\u003c\/li\u003e   \u003cli\u003eInstallation method: on the discharge section of the pump or hydrophore set cooperating with the inverter (details in the model documentation).\u003c\/li\u003e    \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eThe integrated non-return valve in the five-way outlet prevents water from flowing back into the pump, helps maintain the pressure in the installation and ensures its tightness and reliable operation.\n\n\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePractical entries for the pressure gauge, sensor and expansion vessel ensure easy expansion and convenient configuration of the hydrophore system.\u003c\/p\u003e\u003cp\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/p\u003e \u003ch2\u003eFrequently asked questions (FAQ) – what is the five-way inverter discharge output used for?\u003c\/h2\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eWhat is the five-way pressure output of the inverter used for?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way discharge output of the inverter is used to install several pieces of equipment (including a pressure gauge, pressure switch, suction and discharge connections) in one compact module at the output of the inverter system. \u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eIn what installations is the five-way inverter discharge output used?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way pressure output of the inverter is mainly used in hydrophore installations, pressure boosting sets and water systems with an inverter, where it is required to connect several control components in one place.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eIs the inverter's five-way pressure output available online and in stationary stores?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eProducts of this type are usually available for sale online and in wholesalers and stationary stores selling installation fittings. You can check the detailed availability of a specific model directly with the seller.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eHow to choose the appropriate size of the five-way discharge outlet for the inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe selection of the five-way discharge outlet should be based on the system parameters: diameter of the pump and fitting connections, required operating pressure, medium temperature and the recommendations of the inverter and pump manufacturer.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eHow to properly install the five-way pressure output of the inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe discharge outlet is mounted on the discharge section of the pump or on the set's collector, using appropriate seals, in accordance with the manufacturer's diagram and the direction of medium flow. Before the first start-up, check the tightness of all connections.\u003c\/p\u003e \u003c\/details\u003e \u003cdetails\u003e   \u003csummary\u003e\u003cstrong\u003eWhat is the maximum operating pressure and temperature of the discharge output of the five-way inverter?\u003c\/strong\u003e\u003c\/summary\u003e   \u003cp\u003eThe five-way discharge output of the inverter is designed to operate at a maximum pressure of 16 bar and a maximum medium temperature of 90°C. Detailed parameters of a specific model should always be checked in the catalog card.\u003c\/p\u003e \u003c\/details\u003e \u003cscript type=\"application\/ld+json\"\u003e {   \"@context\": \"https:\/\/schema.org\",   \"@type\": \"FAQPage\",   \"mainEntity\": [     {       \"@type\": \"Question\",       \"name\": \"Do czego służy wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera służy do montażu kilku elementów osprzętu (m.in. manometru, wyłącznika ciśnieniowego, króćców ssącego i tłocznego) w jednym module na wyjściu układu z inwerterem. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"W jakich instalacjach stosuje się wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera stosuje się w instalacjach hydroforowych, zestawach podnoszenia ciśnienia oraz układach wodnych z inwerterem, gdzie wymagane jest podłączenie kilku podzespołów kontrolnych w jednym miejscu. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Czy wyjście tłoczne pięciodrożne inwertera jest dostępne online i stacjonarnie?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Produkty tego typu są zazwyczaj dostępne w sprzedaży online oraz w hurtowniach i sklepach stacjonarnych z armaturą instalacyjną. Szczegółową dostępność konkretnego modelu sprawdzisz bezpośrednio u sprzedawcy.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jak dobrać odpowiedni rozmiar wyjścia tłocznego pięciodrożnego do inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Dobór wyjścia tłocznego pięciodrożnego należy oprzeć na parametrach układu: średnicy przyłączy, wymaganym ciśnieniu roboczym, temperaturze medium oraz zaleceniach producenta inwertera i pompy. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jak prawidłowo zamontować wyjście tłoczne pięciodrożne inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne montuje się na odcinku tłocznym pompy lub na kolektorze zestawu, z użyciem odpowiednich uszczelnień, zgodnie ze schematem producenta oraz kierunkiem przepływu medium. Przed pierwszym uruchomieniem należy sprawdzić szczelność wszystkich połączeń. Treści opracowane na podstawie danych ogólnych. Skontaktuj się po szczegóły.\"       }     },     {       \"@type\": \"Question\",       \"name\": \"Jakie jest maksymalne ciśnienie i temperatura pracy wyjścia tłocznego pięciodrożnego inwertera?\",       \"acceptedAnswer\": {         \"@type\": \"Answer\",         \"text\": \"Wyjście tłoczne pięciodrożne inwertera jest przystosowane do pracy przy maksymalnym ciśnieniu 16 bar oraz maksymalnej temperaturze medium 90°C. Szczegółowe parametry konkretnego modelu należy każdorazowo sprawdzić w karcie katalogowej.\"       }     }   ] } \u003c\/script\u003e ","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857696248151,"sku":"002023","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/wyjscietloczone5drozneinverter_89138c75-ac38-4f4d-ae21-e080db2efde5.png?v=1737642709"},{"product_id":"waz-antywibracyjny-70-cm","title":"Anti-vibration knee hose 1” 70 cm","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAnti-vibration hoses with elbow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFlexible anti-vibration hoses made of synthetic EPDM rubber, approved for contact with drinking water, with a metal braid protecting the discharge pipe. Hoses finished with brass tips. On one side, an elbow with a rotating union equipped with a seal, and on the other, a nipple.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHoses with a length of 60 cm, 70 cm, 80 cm have an external diameter of 32 mm and a thread GW × MZ (1” × 1”). \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for pumps and hydrophore tanks, as well as all connections for the distribution of water at temperatures up to 90°C.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857742025047,"sku":"0021","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Waz_antywibracyjny.png?v=1724327383"},{"product_id":"wyjscie-tloczne-pieciodrozne-5-4","title":"Five-way discharge outlet 5\/4\" 70mm","description":"\u003cp\u003e\u003cspan\u003eThe enabler \u003c\/span\u003e\u003cspan\u003einstallation\u003c\/span\u003e\u003cspan\u003e several different components for the inverter, such as: pressure gauge, pressure switch, suction and discharge ports, etc.\u003c\/span\u003e\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857742352727,"sku":"002103","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Wyjscie_tloczne_pieciodrozne.png?v=1724406393"},{"product_id":"waz-antywibracyjny-80-cm","title":"Anti-vibration knee hose 1” 80 cm","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAnti-vibration hoses with elbow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFlexible anti-vibration hoses made of synthetic EPDM rubber, approved for contact with drinking water, with a metal braid protecting the discharge pipe. Hoses finished with brass tips. On one side, an elbow with a rotating union equipped with a seal, and on the other, a nipple.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHoses with a length of 60 cm, 70 cm, 80 cm have an external diameter of 32 mm and a thread GW × MZ (1” × 1”).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWater distribution in heating and air conditioning installations, home water installations. Flexible connections for pumps and hydrophore tanks, as well as all connections for the distribution of water at temperatures up to 90°C.\u003c\/p\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857743401303,"sku":"0022","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Waz_antywibracyjny.png?v=1724327383"},{"product_id":"wlacznik-pc-20p-2-2kw","title":"PC-20P switch (2.2 kW, 230 V) hydrophore automat","description":"\u003cp\u003eThe switch is equivalent to the PC-10P, but equipped with 1¼\" connections\u003c\/p\u003e\n\u003cp\u003ePC-20P Automatic device controlling the operation of surface and deep-well pumps. Replaces the pressure switch and hydrophore tank. Turning on the tap sends a signal to the PC-20P machine, which starts the pump. Turning off the tap causes the PC-20P to turn off the pump. The machine, unlike the others, can operate with single-phase pumps with a power of up to 2200 W, whose current consumption during operation is up to 16 A. The device has a dry-running protection function. When there is no water in the well, the device will turn off the pump. PC-20P is equipped with a 1\" diameter connector.\u003c\/p\u003e\n\u003cp\u003eThe machine is equipped with a 1 m long cable with a plug and a 60 cm long cable for connecting the pump with a cable with a socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction\/discharge port: 1\/4\",\u003c\/li\u003e\n\u003cli\u003eBuilt-in check valve,\u003c\/li\u003e\n\u003cli\u003eDry-running protection,\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure gauge,\u003c\/li\u003e\n\u003cli\u003eManual RESET button,\u003c\/li\u003e\n\u003cli\u003eIndicating diode Power supply POWER,\u003c\/li\u003e\n\u003cli\u003eLED indicating pump operation ON,\u003c\/li\u003e\n\u003cli\u003eFAILURE failure diode,\u003c\/li\u003e\n\u003cli\u003eAutomatic RESTART\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: 1~230 V,\u003c\/li\u003e\n\u003cli\u003eDegree of protection: IP65,\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 40°C,\u003c\/li\u003e\n\u003cli\u003eSwitching pressure - 1.5-3 bar,\u003c\/li\u003e\n\u003cli\u003ePermissible maximum pressure in the system: 10 bar,\u003c\/li\u003e\n\u003cli\u003eMaximum current 16\u003cspan\u003e \u003c\/span\u003eA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857882960215,"sku":"002475","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC-20P.png?v=1724055474"},{"product_id":"sterownik-ibo-press-10-1-4","title":"IBOPRESS 10 - 1\/4\" (2.2 kW, 230 V) controller","description":"\u003ch2\u003eIBOPRESS 10-1\/4\" - pressure switch for the pump\u003c\/h2\u003e\n\u003cp\u003eIBOPRESS 10-1\/4\" by IBO is an electronic pressure switch with overload and dry-running protection function, controlling the operation of a single-phase pump depending on the pressure in the installation. Turns the pump on and off at programmed values, maintaining stable water pressure. A color LCD display with real-time reading and a precise ceramic sensor make operation and work control comfortable and legible.\u003c\/p\u003e\n\n\u003ch2\u003eFor whom\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallers and plumbers - the IBOPRESS 10-1\/4\" switch simplifies the construction of a hydrophore system thanks to ready-made wiring with a plug and socket and clear pressure programming on the LCD screen.\u003c\/li\u003e\n  \u003cli\u003eHome owners with their own water intake - the device maintains constant pressure and protects the pump against dry running and overload.\u003c\/li\u003e\n  \u003cli\u003eUsers of hydrophore sets - the controller limits unnecessary pump operation cycles, which improves its durability and comfort of water consumption.\u003c\/li\u003e\n  \u003cli\u003eDemanding water installations - high measurement precision allows it to be used where constant, repeatable operating conditions are important.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eIBOPRESS 10-1\/4\" works well in home and garden water installations in which a single-phase pump is supposed to maintain the set pressure. It works with surface and hydrophore pumps, controlling their operation based on the reading of a ceramic pressure sensor. Programmable activation and deactivation thresholds and delay times allow you to adjust the pump operation to the size of the tank and the nature of the installation.\u003c\/p\u003e\n\u003cp\u003eThe device regulates the pump operation as a function of the pressure in the system, and built-in protections protect the engine against the effects of lack of water and overload. The pump is controlled by an electronic pressure switch IBOPRESS 10-1\/4\" 230 V.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures of the IBOPRESS 10-1\/4\" switch\u003c\/h2\u003e\n\u003cp\u003eThe heart of the device is a silicon, piezoresistive pressure sensor in a stainless steel housing, the indications of which are presented on a color LCD display synchronized with real-time measurement, along with signaling emergency states. The user programs the switch-on pressure, switch-off pressure, delay times and protection thresholds, and the pressure values ​​can be displayed in bars, kg\/cm² or PSI.\u003c\/p\u003e\n\u003cp\u003eProtection against dry running is based on pressure analysis - when it drops below a set threshold, the pump is stopped. IBOPRESS 10-1\/4\" is equipped with a cable with a mains plug and a second cable with a socket, which makes it easier to connect it to the pump's power supply system. Additionally, you can set the maximum allowable current consumption, protecting the motor against overload. The most important parameters are summarized below.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: \u003cstrong\u003eIBO\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eType: \u003cstrong\u003eelectronic pressure switch for single-phase pumps\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003ePower supply: \u003cstrong\u003e230V\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaximum power of the supported pump: \u003cstrong\u003e2.2 kW\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003ePressure range in the controlled system: \u003cstrong\u003e0–10 bar\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eDegree of protection: \u003cstrong\u003eIP55\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eOperating modes: \u003cstrong\u003eautomatic \/ manual\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eSecurity: \u003cstrong\u003eprotection against dry running, engine overload\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaximum medium temperature: \u003cstrong\u003e90°C\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eConnection sensor: \u003cstrong\u003e1\/4\"\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIBO – 24 months (2 years) manufacturer's warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions (FAQ) – IBOPRESS switch 10-1\/4\"\u003c\/h3\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat is the IBOPRESS 10-1\/4\" pressure switch used for?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-10-zastosowanie\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eIBOPRESS 10-1\/4\" is an electronic pressure switch that automatically turns on and off the single-phase pump depending on the pressure in the installation and protects it against dry running and overload. Maintains constant water pressure in the system.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat pumps does IBOPRESS 10-1\/4\" work with?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-10-pompy\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eThe switch is designed for single-phase pumps with a power of up to 2.2 kW with a 230 V power supply. It is suitable for surface and hydrophore pumps in home and garden water installations.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eDoes IBOPRESS 10-1\/4\" protect the pump against dry running?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-10-suchobieg\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eYes. Protection against dry running is based on the analysis of the pressure in the installation - when it drops below the programmed threshold, the switch stops the pump. You can also set the maximum allowable current consumption, which protects the motor against overload.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat is the difference between IBOPRESS 10-1\/4\" and the IBOPRESS 30 model?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-10-roznice\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eIBOPRESS 10-1\/4\" is designed for single-phase 230 V pumps with a power of up to 2.2 kW, while \u003ca href=\"https:\/\/dambat.pl\/products\/sterownik-ibo-press-30\"\u003eIBOPRESS 30\u003c\/a\u003e supports three-phase 400 V pumps with a power of up to 7.5 kW and additionally protects them against phase loss. You will find the full offer in the category \u003ca href=\"https:\/\/dambat.pl\/collections\/sterowniki\"\u003edrivers\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eCan the IBOPRESS 10-1\/4\" switch be mounted outdoors?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-10-montaz\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eThe device has a protection class of IP55 and is intended for installation in dry, well-ventilated places, away from direct sunlight. Installation in an open area or in a damp manhole is possible after placing the circuit breaker in a protective cabinet.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhere to buy the IBOPRESS 10-1\/4\" switch?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-10-gdzie-kupic\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eAs a manufacturer, we do not sell directly. The IBOPRESS 10-1\/4\" switch by IBO can be purchased from our trading partners, installation wholesalers and authorized online distributors.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat is the warranty for the IBOPRESS 10-1\/4\" switch?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-10-gwarancja\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eIBO – 24 months (2 years) manufacturer's warranty.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do czego służy wyłącznik ciśnieniowy IBOPRESS 10-1\/4\\\"?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBOPRESS 10-1\/4\\\" to elektroniczny wyłącznik ciśnieniowy, który automatycznie załącza i wyłącza pompę jednofazową w zależności od ciśnienia w instalacji oraz chroni ją przed suchobiegiem i przeciążeniem. Utrzymuje stałe ciśnienie wody w układzie.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Z jakimi pompami współpracuje IBOPRESS 10-1\/4\\\"?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Wyłącznik przeznaczony jest do pomp jednofazowych o mocy do 2,2 kW przy zasilaniu 230 V. Sprawdza się przy pompach powierzchniowych i hydroforowych w domowych oraz ogrodowych instalacjach wodnych.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Czy IBOPRESS 10-1\/4\\\" chroni pompę przed suchobiegiem?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Tak. Ochrona przed suchobiegiem opiera się na analizie ciśnienia w instalacji – gdy spadnie ono poniżej zaprogramowanego progu, wyłącznik zatrzymuje pompę. Można także ustawić maksymalny dopuszczalny pobór prądu, co zabezpiecza silnik przed przeciążeniem.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Czym różni się IBOPRESS 10-1\/4\\\" od modelu IBOPRESS 30?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBOPRESS 10-1\/4\\\" przeznaczony jest do pomp jednofazowych 230 V o mocy do 2,2 kW, natomiast IBOPRESS 30 obsługuje pompy trójfazowe 400 V o mocy do 7,5 kW i dodatkowo chroni je przed zanikiem fazy. Pełną ofertę znajdziesz w kategorii sterowniki.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Czy wyłącznik IBOPRESS 10-1\/4\\\" można montować na zewnątrz?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Urządzenie ma stopień ochrony IP55 i jest przeznaczone do montażu w miejscach suchych, dobrze wentylowanych, z dala od bezpośredniego nasłonecznienia. Instalacja w terenie otwartym lub w wilgotnej studzience jest możliwa po umieszczeniu wyłącznika w szafce osłonowej.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Gdzie kupić wyłącznik IBOPRESS 10-1\/4\\\"?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Jako producent nie prowadzimy sprzedaży bezpośredniej. Wyłącznik IBOPRESS 10-1\/4\\\" marki IBO można nabyć u naszych partnerów handlowych, w hurtowniach instalacyjnych oraz u autoryzowanych dystrybutorów online.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Jaka jest gwarancja na wyłącznik IBOPRESS 10-1\/4\\\"?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBO – 24 miesiące (2 lata) gwarancji producenta.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857886204247,"sku":"002547","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/IBOPRESS_10.png?v=1724235895"},{"product_id":"sterownik-ibo-press-30","title":"IBOPRESS 30 (7.5 kW, 400 V) - Controller","description":"\u003ch2\u003eIBOPRESS 30 - pressure switch for three-phase pumps\u003c\/h2\u003e\n\u003cp\u003eIBOPRESS 30 by IBO is an electronic pressure switch designed to control the operation of a three-phase pump depending on the pressure in the installation, with an extensive security package. It turns the pump on and off at programmed pressure values ​​and protects it against dry running, overload, phase loss and voltage fluctuations. A color LCD display with real-time reading and a precise ceramic sensor ensure convenient control and stable operation of the system.\u003c\/p\u003e\n\n\u003ch2\u003eFor whom\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallers and electricians - the IBOPRESS 30 switch organizes the control of a three-phase pump and facilitates the selection of protection devices thanks to clear programming of pressure and current on the LCD screen.\u003c\/li\u003e\n  \u003cli\u003eOwners of houses and farms with intake from a well - the device maintains constant water pressure and protects the pump against costly failures.\u003c\/li\u003e\n  \u003cli\u003eFacilities with more powerful three-phase pumps - the controller supports higher power motors, ensuring stable operating conditions of the installation.\u003c\/li\u003e\n  \u003cli\u003eDemanding water installations - high measurement precision allows it to be used where constant, repeatable operating parameters are important.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eIBOPRESS 30 works well in water installations powered by a three-phase pump, in which the controller is supposed to maintain the set pressure. It works with deep-well and surface pumps, controlling their operation based on the reading of a ceramic pressure sensor connected with a separate cable. Programmable pressure thresholds and delay times allow you to adjust the pump operation to the nature of the installation and the size of the tank.\u003c\/p\u003e\n\u003cp\u003eThe device regulates the pump operation as a function of the system pressure, and built-in protections protect the motor against the effects of water shortage, overload, phase loss and voltage anomalies. As three-phase equipment, it should be connected by a qualified installer. The pump is controlled by an IBOPRESS 30,400 V electronic pressure switch.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures of the IBOPRESS 30 switch\u003c\/h2\u003e\n\u003cp\u003eThe heart of the device is a silicon, piezoresistive pressure sensor in a stainless steel housing, connected to the controller with a separate cable, the indications of which are presented on a color LCD display synchronized with real-time measurement and with signaling of emergency states. The user programs the switch-on pressure, switch-off pressure, delay times and protection thresholds, and the pressure values ​​can be displayed in bars, kg\/cm² or PSI.\u003c\/p\u003e\n\u003cp\u003eProtection against dry running is based on pressure analysis - when it drops below a set threshold, the pump is stopped. IBOPRESS 30 also protects the motor against overload, phase loss and too low and too high supply voltage. It is available in a standard version and in a version in a protective cabinet, enabling installation in an open area or in a damp manhole. The most important parameters are summarized below.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: \u003cstrong\u003eIBO\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eType: \u003cstrong\u003eelectronic pressure switch for three-phase pumps\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003ePower supply: \u003cstrong\u003e3~400V, 50\/60Hz\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaximum power of the supported pump: \u003cstrong\u003e7.5 kW\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003ePressure range in the controlled system: \u003cstrong\u003e3–10 bar\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eDegree of protection: \u003cstrong\u003eIP55\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eOperating modes: \u003cstrong\u003eautomatic \/ manual\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eSecurity: \u003cstrong\u003eprotection against dry running, overload, phase loss, too low and too high voltage\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaximum medium temperature: \u003cstrong\u003e90°C\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eConnection sensor: \u003cstrong\u003e1\/4\"\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIBO – 24 months (2 years) manufacturer's warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDambat – a trusted manufacturer of pumps and hydrotechnical equipment with quality certificates.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions (FAQ) – IBOPRESS 30 switch\u003c\/h3\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat is the IBOPRESS 30 pressure switch used for?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-30-zastosowanie\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eIBOPRESS 30 is an electronic pressure switch that automatically turns on and off the three-phase pump depending on the installation pressure and protects it against dry running, overload, phase loss and voltage fluctuations. Maintains constant water pressure in the system.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat pumps does IBOPRESS 30 work with?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-30-pompy\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eThe switch is designed for three-phase pumps with a power of up to 7.5 kW at 400 V. It is suitable for deep-well and surface pumps in installations requiring constant pressure.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eDoes IBOPRESS 30 protect the pump against dry running and phase failure?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-30-suchobieg\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eYes. Protection against dry running is based on the analysis of the pressure in the installation - when it drops below a set threshold, the pump is stopped. The device also protects the motor against overload, phase loss and too low and too high voltage.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat is the difference between IBOPRESS 30 and the IBOPRESS 10-1\/4\" model?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-30-roznice\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eIBOPRESS 30 supports three-phase 400 V pumps with a power of up to 7.5 kW and additionally protects them against phase failure, while \u003ca href=\"https:\/\/dambat.pl\/products\/sterownik-ibo-press-10-1-4\"\u003eIBOPRESS 10-1\/4\"\u003c\/a\u003e is intended for single-phase 230 V pumps with a power of up to 2.2 kW. You will find the full offer in the category \u003ca href=\"https:\/\/dambat.pl\/collections\/sterowniki\"\u003edrivers\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eCan the IBOPRESS 30 switch be installed outdoors?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-30-montaz\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eThe device has a protection class of IP55 and in its standard version is intended for installation in dry, well-ventilated rooms. A version in a protective cabinet is also available, enabling installation in an open area or in a damp manhole.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhere to buy the IBOPRESS 30 switch?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-30-gdzie-kupic\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eAs a manufacturer, we do not sell directly. The IBOPRESS 30 switch by IBO can be purchased from our trading partners, installation wholesalers and authorized online distributors.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat is the warranty for the IBOPRESS 30 switch?\u003c\/strong\u003e\u003c\/summary\u003e\n  \u003ch4 id=\"ibopress-30-gwarancja\"\u003e\u003c\/h4\u003e\n  \u003cp\u003eIBO – 24 months (2 years) manufacturer's warranty.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do czego służy wyłącznik ciśnieniowy IBOPRESS 30?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBOPRESS 30 to elektroniczny wyłącznik ciśnieniowy, który automatycznie załącza i wyłącza pompę trójfazową w zależności od ciśnienia w instalacji oraz chroni ją przed suchobiegiem, przeciążeniem, zanikiem fazy i wahaniami napięcia. Utrzymuje stałe ciśnienie wody w układzie.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Z jakimi pompami współpracuje IBOPRESS 30?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Wyłącznik przeznaczony jest do pomp trójfazowych o mocy do 7,5 kW przy zasilaniu 400 V. Sprawdza się przy pompach głębinowych i powierzchniowych w instalacjach wymagających stałego ciśnienia.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Czy IBOPRESS 30 chroni pompę przed suchobiegiem i zanikiem fazy?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Tak. Ochrona przed suchobiegiem opiera się na analizie ciśnienia w instalacji – po jego spadku poniżej zadanego progu pompa zostaje zatrzymana. Urządzenie zabezpiecza silnik również przed przeciążeniem, zanikiem fazy oraz zbyt niskim i zbyt wysokim napięciem.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Czym różni się IBOPRESS 30 od modelu IBOPRESS 10-1\/4\\\"?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBOPRESS 30 obsługuje pompy trójfazowe 400 V o mocy do 7,5 kW i dodatkowo chroni je przed zanikiem fazy, podczas gdy IBOPRESS 10-1\/4\\\" przeznaczony jest do pomp jednofazowych 230 V o mocy do 2,2 kW. Pełną ofertę znajdziesz w kategorii sterowniki.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Czy wyłącznik IBOPRESS 30 można montować na zewnątrz?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Urządzenie ma stopień ochrony IP55 i w wykonaniu standardowym przeznaczone jest do montażu w suchych, dobrze wentylowanych pomieszczeniach. Dostępna jest również wersja w szafce osłonowej, umożliwiająca montaż w terenie otwartym lub w wilgotnej studzience.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Gdzie kupić wyłącznik IBOPRESS 30?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Jako producent nie prowadzimy sprzedaży bezpośredniej. Wyłącznik IBOPRESS 30 marki IBO można nabyć u naszych partnerów handlowych, w hurtowniach instalacyjnych oraz u autoryzowanych dystrybutorów online.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Jaka jest gwarancja na wyłącznik IBOPRESS 30?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"IBO – 24 miesiące (2 lata) gwarancji producenta.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857886466391,"sku":"002549","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/IBOPRESS_30_1.png?v=1776071217"},{"product_id":"wlacznik-pc-16","title":"PC-16 switch - hydrophore machine","description":"\u003cp\u003eAutomatic device controlling the operation of surface and deep-well pumps. Replaces the pressure switch and hydrophore tank. Turning on the tap sends a signal to the PC-16 machine, which starts the pump. Turning off the tap causes the PC-16 to turn off the pump. The machine can operate with single-phase pumps with a power of up to 1300 W, whose current consumption during operation does not exceed 10 A. The device has a dry-running protection function. When there is no water in the well, the device will turn off the pump. PC-16 differs from other controllers with a restart function. PC-16 has an automatic restart function. It consists in the fact that after some time after stopping due to dry running, the device tries to automatically resume pump operation. If water still does not flow into the well, the device turns off the pump again. The cycle will be repeated several times a day after the first shutdown. This solution is the best for automatic irrigation. The device is easy to install. It has a 1 m long power cable with a plug and an electrical socket for connecting the pump. PC-16 is equipped with a 1\" diameter connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction\/discharge port: 1\",\u003c\/li\u003e\n\u003cli\u003eBuilt-in check valve,\u003c\/li\u003e\n\u003cli\u003eDry-running protection,\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure gauge,\u003c\/li\u003e\n\u003cli\u003eManual RESET button,\u003c\/li\u003e\n\u003cli\u003eIndicating diode Power supply POWER,\u003c\/li\u003e\n\u003cli\u003eLED indicating pump operation ON,\u003c\/li\u003e\n\u003cli\u003eFAILURE failure diode,\u003c\/li\u003e\n\u003cli\u003eAutomatic RESTART\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: 1~230 V,\u003c\/li\u003e\n\u003cli\u003eDegree of protection: IP65,\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 40°C,\u003c\/li\u003e\n\u003cli\u003eSwitching pressure - 1.5-3 bar,\u003c\/li\u003e\n\u003cli\u003ePermissible maximum pressure in the system: 10 bar,\u003c\/li\u003e\n\u003cli\u003eMaximum current 10 A (at start-up 16\u003cspan\u003e \u003c\/span\u003eA).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857920381271,"sku":"0085","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC_16.png?v=1724231436"},{"product_id":"wlacznik-cisnieniowy-pc-9","title":"PC-9 pressure switch","description":"\u003cp data-mce-fragment=\"1\"\u003ePressure switches are designed to automatically switch on and off hydrophore sets complete with surface and submersible pumps equipped with an electric motor.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe switches control the operation of devices depending on the setting of the switch-on and switch-off pressure parameters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe switches have a housing made of durable plastic and the contacts are copper or silver. Depending on the model, the devices have different values ​​of possible operating modes in a specific pressure range.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePressure range: 1.6-4.6\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax. current: 12 A,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower supply: 230V,\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConnector diameter: 1\/4\",\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGW. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857920446807,"sku":"0109","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC-9_c.png?v=1746697072"},{"product_id":"wlacznik-cisnieniowy-pc-sk-2-gz-meski","title":"PC SK-2 GZ male pressure switch","description":"\u003cp\u003ePressure switches are designed to automatically switch on and off hydrophore sets complete with surface and submersible pumps equipped with an electric motor.\u003c\/p\u003e\n\u003cp\u003eThe switches control the operation of devices depending on the setting of the switch-on and switch-off pressure parameters.\u003c\/p\u003e\n\u003cp\u003eThe switches have a housing made of durable plastic and the contacts are copper or silver. Depending on the model, the devices have different values ​​of possible operating modes in a specific pressure range.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePressure range: 1.2 - 5.0 Bar\u003c\/li\u003e\n\u003cli\u003eMax. current: 12 A,\u003c\/li\u003e\n\u003cli\u003ePower supply: 230V,\u003c\/li\u003e\n\u003cli\u003eConnector diameter: 1\/4\" M.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857921823063,"sku":"0438","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC_SK_2_GZ_meski.png?v=1771574863"},{"product_id":"wyjscie-tloczne-pieciodrozne-90mm","title":"Five-way discharge outlet 1\" \/ 90mm","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe enabler \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003einstallation\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e several different components for the pump, such as: pressure gauge, pressure switch, suction and discharge port, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHeight: 90 mm,\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pumps: 1\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pressure installation: 1\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection anti-vibration hose: 1\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pressure gauge: 1\/4\",\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnection pressure switch: 1\/4\".\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857922478423,"sku":"0553","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/Wyjscie_tloczne_pieciodrozne.png?v=1724406393"},{"product_id":"wlacznik-pc-10p","title":"PC-10P switch - hydrophore automat","description":"\u003cp\u003ePC-10P Automatic device controlling the operation of surface and deep-well pumps. Replaces the pressure switch and hydrophore tank. Turning on the tap sends a signal to the PC-10P machine, which starts the pump. Turning off the tap causes the PC-10P to turn off the pump. The machine, unlike the others, can operate with single-phase pumps with a power of up to 2200 W, whose current consumption during operation is up to 16 A. The device has a dry-running protection function. When there is no water in the well, the device will turn off the pump. PC-10P is equipped with a 1\" diameter connector.\u003c\/p\u003e\n\u003cp\u003eThe machine is equipped with a 1 m long cable with a plug and a 60 cm long cable for connecting the pump with a cable with a socket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParameters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuction\/discharge port: 1\",\u003c\/li\u003e\n\u003cli\u003eBuilt-in check valve,\u003c\/li\u003e\n\u003cli\u003eDry-running protection,\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure gauge,\u003c\/li\u003e\n\u003cli\u003eManual RESET button,\u003c\/li\u003e\n\u003cli\u003eIndicating diode Power supply POWER,\u003c\/li\u003e\n\u003cli\u003eLED indicating pump operation ON,\u003c\/li\u003e\n\u003cli\u003eFAILURE failure diode,\u003c\/li\u003e\n\u003cli\u003eAutomatic RESTART\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage: 1~230 V,\u003c\/li\u003e\n\u003cli\u003eDegree of protection: IP65,\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature: 40°C,\u003c\/li\u003e\n\u003cli\u003eSwitching pressure - 1.5-3 bar,\u003c\/li\u003e\n\u003cli\u003ePermissible maximum pressure in the system: 10 bar,\u003c\/li\u003e\n\u003cli\u003eMaximum current 16 A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IBO","offers":[{"title":"Default Title","offer_id":46857922511191,"sku":"0554","price":999999.99,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/files\/PC_10P.png?v=1724237194"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0707\/2943\/3375\/collections\/Osprzet_pomp_powierzchniowych_i_hydroforow.png?v=1780480361","url":"https:\/\/dambat.pl\/en\/collections\/accessories-for-surface-and-hydrophore-pumps.oembed","provider":"DAMBAT Jastrzębski S.K.A.","version":"1.0","type":"link"}